-
Vendor: Bently Nevada
3300 XL 8 mm Probe 330101-00-16-10-02-00 Bently Nevada
Bently Nevada 330101-00-16-10-02-00: High-Performance 3300 XL 8 mm Vibration Probe Core Advantages Ultra-Rugged Design: 8 mm PPS probe tip with 330 N (75 lbf) pull strength via CableLoc technology – 25% stronger than legacy models Precision Engineering: ±0.025 mm (±1 mil) deviation accuracy across... -
Vendor: Bently Nevada
330104-00-06-20-01-05 Bently Nevada | Probe
⚡ Full Model: Bently Nevada 330104-00-06-20-01-053300 XL 8mm Industrial Proximity Probe | M10×1 Thread | 2.0m Standard Cable 🔬 Precision Engineering: • 7.88Ω ±0.5Ω DC Resistance @2m Cable• Operates at -26Vdc to -17.5Vdc (12mA Max)• Withstands 232°C Continuous (T1 Rating)• Viton® O-Ring Seals @2000m... -
Vendor: Bently Nevada
Bently Nevada 330104-00-03-90-11-CN - Probe
Bently Nevada 330104-00-03-90-11-CN3300 XL 8 mm Proximity Probe with 9.0m FluidLoc® Cable | Made in USA ⚙️ Enhanced Technical Specs: • M10×1 Thread Pitch with 30mm Case Length• 9.87Ω ±0.5Ω DC Resistance @29.5ft Cable• Withstands 232°C Max Temp (T1 Classification)• Viton® O-Ring for 2000m... -
Vendor: Bently Nevada
Proximity Probe - 330104-05-11-90-11-CN Bently Nevada
▣ Bently Nevada 330104-05-11-90-11-CN8mm Proximity Probe System | Country-Specific Certified ⚙ Hardware Profile • Threaded Design: M10×1 with 50mm smooth section• Case Construction: 110mm AISI 304 stainless steel• Cable Assembly: 9.0m FluidLoc (IP67-rated) ⛛ Critical Metrics → DC Resistance: 9.87Ω (±0.50Ω)→ Voltage Window: -17.5Vdc... -
Vendor: Bently Nevada
Proximity Probe 330104-00-02-90-02-CN Bently Nevada
Bently Nevada 330104-00-02-90-02-CNIndustrial-Grade 8mm Proximity Probe System ◉ Complete Model Breakdown:330104-00 (Unthreaded: 00mm) -02 (Case: 20mm) -90 (Cable: 9.0m) -02 (ClickLoc Connector) -CN (Country Approval) ◉ Precision Engineering:• DC Resistance: 9.87Ω ±0.50 @25°C• Linearity: ±0.25mm over full scale• Frequency Response: 0-12kHz (±3dB)• Target Material:... -
Vendor: Bently Nevada
330104-05-11-90-11-05 | Bently Nevada | Probe
Bently Nevada 330104-05-11-90-11-05 MODEL ARCHITECTURE • 330104-05-11-90-11-05 • 05 50mm unthreaded section • 11 110mm reinforced case • 90 9m industrial-grade cable • 11 FluidLock™ moisture-resistant connector • 05 Global hazardous area certification PRECISION ENGINEERING ▶ 18kV/mm dielectric strength ▶ 9.87Ω±0.5 DC resistance @25°C... -
Vendor: Bently Nevada
330104-00-02-90-02-05 Bently Nevada - Proximity Probe
Bently Nevada 330104-00-02-90-02-05 NEW Industrial-grade M10×1 threaded probe with 20mm armored case and 9.87Ω±0.5 resistance at 9m length. MODEL BREAKDOWN • 330104-00-02-90-02-05 • 00 Zero unthreaded section • 02 20mm compact housing • 90 9m standard cable • 02 ClickLoc connector system • 05... -
Vendor: Bently Nevada
Probe 330104-00-02-90-01-05 Bently Nevada
Bently Nevada 330104-00-02-90-01-05 Industrial Proximity Probe with 20mm armored case and CSA/ATEX/IECEx triple certification MODEL DECOMPRESSION • 330104-00-02-90-01-05 • 00 Zero unthreaded length • 02 20mm stainless steel housing • 90 9m standard cable • 01 ClickLoc+Protector connector • 05 Global safety certifications CORE... -
Vendor: Bently Nevada
330104-00-03-90-11-05 Bently Nevada - 8 mm Probe
Bently Nevada 330104-00-03-90-11-05 Industrial-Grade Proximity Sensor with FluidLoc™ cable technology.M10×1 threaded probe featuring 30mm armored case and 9.87Ω±0.5 resistance at 9m length. MODEL DECODER • 330104-00-03-90-11-05 • 00: 0mm unthreaded section • 03: 30mm case length • 90: 9.0m (29.5ft) FluidLoc cable • 11:... -
Vendor: Bently Nevada
330104-00-08-90-02-00 | Bently Nevada | 8 mm Probe
Bently Nevada 330104-00-08-90-02-00 Full Model Breakdown: 330104-00-08-90-02-00• 00: 0mm unthreaded section• 08: 80mm case length• 90: 9.0m (29.5ft) cable• 02: ClickLoc connector• 00: No certifications Core Technical Data ⮞ 9.87Ω±0.5 DC resistance at 9m length ⮞ M10×1 thread with 80mm armored case ⮞ Viton®... -
Vendor: Bently Nevada
Bently Nevada - 330104-00-02-90-02-00 - 8 mm Probe
Bently Nevada 330104-00-02-90-02-00 Core Specifications • 8mm Proximity Probe with 9.87Ω±0.5 DC resistance • M10×1 thread | 20mm case length | 9m cable • 500g axial load capacity on PPS tip material Technical Parameters ▶ Temperature range: -55°C to +232°C (T1 rating) ▶ ±0.05mm... -
Vendor: Bently Nevada
330104-00-02-90-01-00 - Bently Nevada - Probe
Bently Nevada 330104-00-02-90-01-00 9m Armored Probe M10x1 Thread ClickLoc+ Protector Configuration Breakdown 🔧 Unthreaded: 00=0mm (Full thread engagement) 📏 Case Length: 02=20mm compact housing 📐 Cable Reach: 9.0m (29.5ft) with armor protection 🔌 Connector: 01=ClickLoc+ with dust cap 9.87Ω±0.50 Resistance -55°C~+232°C Range2.8Bar O-ring Seal... -
Vendor: Bently Nevada
330104-01-05-50-02-00 Bently Nevada | Probe
Bently Nevada 330104-01-05-50-02-00 🛠️ Industrial-Grade | M10 Thread | 5.0m Armored Cable 01=1mm Unthreaded 05=50mm Case 02=ClickLoc Connector ⚡ 8.73Ω±0.50 @25°C | 🛡️ IP67 (30min @1m) Performance Highlights 🔩 Thread Spec: M10x1 (12mm max engagement)🌡️ Temp Range: -40°C~+150°C⚡ Response: 0.8ms stabilization @-24V DC🔋 Power:... -
Vendor: Bently Nevada
Probe 330104-03-09-50-02-CN Bently Nevada
Bently Nevada 330104-03-09-50-02-CN M10 Threaded Proximity Probe with Country-Specific Certification 03=30mm Unthreaded | 09=90mm Case | 50=5.0m CableCountry-Specific Approval: CN-Certified for regional compliance Technical Mastery ⚡ DC Resistance: 8.73Ω±0.50 @25°C±2°C 🌡️ Temp Range: -55°C~+232°C (EPL Ga/Gc T1) 🔩 Thread Spec: M10x1 (14mm max engagement)... -
Vendor: Bently Nevada
Probe - 330104-00-04-50-02-05 - Bently Nevada
Bently Nevada 330104-00-04-50-02-05 High-Precision M10 Threaded Proximity Probe with 5m Armored Cable 00=0mm Unthreaded | 04=40mm Case | 50=5.0m CableCertified for CSA/ATEX/IECEx hazardous areas Core Specifications ⚡ Resistance: 8.73Ω±0.50 @25°C±3°C 🔩 Thread: M10x1 (ISO metric fine) 🌡️ Temp Range: -30°C~+260°C (cable) 📏 Gap Accuracy:... -
Vendor: Bently Nevada
Proximity Probe - 330102-40-62-05-02-05 - Bently Nevada
Bently Nevada 330102-40-62-05-02-05 Multi-Certified 8mm Proximity Probe with Extended Range 40=4" Unthreaded | 62=6.2" Case | 05=0.5m CableTriple certification: CSA/ATEX/IECEx compliant Engineering Excellence ⚡ DC Resistance: 7.45Ω±0.50 @20°C±5°C 📏 Detection Range: 0.25-2.3mm (10-90 mils) @-1V~-17V 🌡️ Temp Endurance: -52°C~+260°C (cable rated) 🔩 Thread Spec:... -
Vendor: Bently Nevada
Proximity Probe | 330102-24-48-05-01-00 Bently Nevada
Bently Nevada 330102-24-48-05-01-00 Industrial-Grade 8mm Proximity Probe with UNF Threading 3/8-24 UNF thread (0.563" max engagement)4.8" Case with 2.4" unthreaded section323g/m weight density | 0.5m armored cable Precision Engineering 🔋 Resistance: 7.45Ω±0.50 @25°C 📐 Linear Range: 0.25-2.3mm (10-90 mils) 🌡️ Temp Range: -52°C to... -
Vendor: Bently Nevada
Bently Nevada | 330102-24-48-05-01-RU Probe
Bently Nevada 330102-24-48-05-01-RU 3300 XL 8mm Threaded Proximity Probe System 3/8-24 UNF Military-grade thread design4.8in Case with 2.4in unthreaded sectionCertified for Country-Specific (RU) applications Core Configuration 🔩 Thread Engagement: 0.563in max (14.3mm) 📏 Cable: 1.6ft armored + ClickLoc protector ⚡ Resistance: 7.45Ω±0.50 @0.5m length... -
Vendor: Bently Nevada
330104-00-08-05-02-00 - Bently Nevada - Proximity Probe
Bently Nevada 330104-00-08-05-02-00 3300 XL 8mm Compact Proximity Probe System 0.5m Special - Optimized for short-range monitoring1.6ft Cable with standard coaxial ClickLoc connectorViton® O-ring rated for 2000m altitude sealing Configuration Details 🔧 Thread: M10×1 (80mm SST case) 📏 Dimensions: 0mm unthreaded + 500mm total... -
Vendor: Bently Nevada
Proximity Probe 330104-00-09-50-02-00 Bently Nevada
Bently Nevada 330104-00-09-50-02-00 3300 XL 8mm Industrial Proximity Probe System 5.0m Special - Designed exclusively for 5m Proximitor sensors8.73Ω±0.50 DC resistance at full 5m lengthViton® O-ring seals rated for 2000m altitude operation Configuration Breakdown 🔩 Thread: M10×1 with 90mm stainless case 📏 Length: 0mm...
Available 24/7 at
+86 15392429628
Vendor: Bently Nevada
PROXPAC XL Proximity Transducer 330880-16-40-037-03-02
Bently Nevada PROXPAC XL Proximity Transducer Manufacturer: Bently Nevada Product No.: 330880-16-40-037-03-02 Product Type: PROXPAC XL Proximity Transducer Made in: U.S.A Certificate Availability: Can add on Certificate Of Origin (COO) Probe and Configuration Options: Probe and Approvals Option: 16 (3300 XL 8 mm probe...
Vendor: Bently Nevada
330880-16-00-045-00-02 PROXPAC XL Proximity Transducer
Bently Nevada 330880-16-00-045-00-02 - PROXPAC XL Proximity Transducer This PROXPAC XL Proximity Transducer is proudly made in the U.S.A. and is available with an optional Certificate of Origin (COO). Product Features: Weight: 1.44 kg (3.2 lb) Temperature Range: -51 °C to +177 °C (-60...
Vendor: Bently Nevada
330880-28-00-105-02-02 New Bently Nevada
Bently Nevada PROXPAC XL Proximity Transducer Product No.: 330880-28-00-105-02-02 Type: PROXPAC XL Proximity Transducer Origin: Made in U.S.A | COO: Available Key Specifications Probe: 3300 XL 8 mm with Multiple Approvals Standoff Adapter: None Probe Penetration: 105 mm Fittings: Two 3/4-14 NPT fittings, one...
- Choosing a selection results in a full page refresh.