-
Vendor: General Electric
IC200PBI001 - Network Interface Unit GE Fanuc
GE Fanuc Versamax Profibus NIU Model: IC200PBI001 (suffix PBI001 denotes Profibus interface) The IC200PBI001 is a high-performance Network Interface Unit designed to integrate up to 64 Versamax I/O modules on a Profibus DP network. Its compact profile and robust diagnostics ensure smooth operation in... -
Vendor: General Electric
IC200PNS001 - Network Interface Unit | GE Fanuc
GE Fanuc Versamax Profinet Scanner Model: IC200PNS001 (suffix PNS001 indicates Profinet interface) Detailed Specifications Power Consumption: 0.60 A @ 5 V DC (≈3 W) | MTBF: 120 000 hours I/O Capacity: 2880 bytes discrete (1440 in/1440 out) + 2880 bytes analog (1440 in/1440 out)... -
Vendor: General Electric
IC200PWR201 - Power Supply - GE Fanuc
IC200PWR201 Primary Specifications Input Voltage: 9.6–15 V DC (12 V nominal) Input Power: 11 W Inrush Current: 25 A @ 12 V DC, 30 A @ 15 V DC Output Currents: 5 V rail up to 1.25 A; 3.3 V rail up to 0.25... -
Vendor: General Electric
IC200PWR202 Power Module | GE Fanuc Emerson
IC200PWR202 Key Specifications Input Voltage: 9.6–15 VDC (12 VDC nominal) Output Rails: 5 VDC @ up to 1.5 A; 3.3 VDC @ up to 1 A; 3 VDC extended power Input Power: 11 W Inrush Current: 25 A @ 12 VDC; 30 A @... -
Vendor: General Electric
IC200SET001 GE Fanuc | Ethernet Adapter Module
IC200SET001 Key Features Ethernet Port: One RJ45 10/100 Mbps (supports up to 8 simultaneous TCP connections). Serial Interfaces: One RS-232 and one RS-485 port (up to 16 devices). MTBF: 100,000 hours typical at 25 °C. LED Indicators: Power, Status, Tx/Rx (x2). VLAN Support: VLAN... -
Vendor: General Electric
IC200TBM002 I/O Terminal Strip - GE Fanuc
IC200TBM002 Key Features Model Number: IC200TBM002Suffix: TBM002 Terminals: 18 internally bussed IEC-style Terminal Pitch: 5.08 mm to ensure reliable spacing Current Rating: 10 A per terminal Insulation Voltage: 1 500 V AC dielectric strength Operating Temperature: –20 °C to 60 °C Dimensions: 125 mm... -
Vendor: General Electric
IC670FBI001 Field Bus Interface I/O Base | GE Fanuc
Product Name: GE Fanuc IC670FBI001 Field Bus Interface I/O Base, Connector Style, Hot Insertion Key Features: Installation Type: Connector style with hot insertion support Compatible Series: IC670C / IC670CH / IC670CHS Nominal Voltage Ratings: 115 Volts AC or 125 Volts DC Voltage Input Range:... -
Vendor: General Electric
IC670MDL641 Field Control Module | Discrete Input Module
IC670MDL641 Field Control Module Key Specifications Rated Voltage: 48 Volts DC Input Range: 0 – 60 Volts DC Isolation Voltage: 250 VAC continuous / 1500 VAC (1 min) Inputs: 16 points, grouped (positive/negative logic) User Current: 2.5 mA per point @ 48 VDC On‑State Voltage: +34 to +60 V / –34 to –60 V Off‑State Voltage: 0 to +10 V / 0 to –10 V Response Time: On:... -
Vendor: General Electric
IC694ALG222 - Analog Input Module | GE Fanuc Emerson
Key Features & Technical Data Model: IC694ALG222Suffix “222” Meaning: 16 SE / 8 DI channelsVoltage Ranges: 0 to 10 V & –10 to +10 VResolution: 12‑bit (2.5 mV/count @0–10 V; 5 mV/count @±10 V)Update Rates: 6 ms (all 16 SE) & 3 ms (all 8 DI)Input Impedance: >500 kΩ (SE) & 250 Ω (DI)Common‑Mode Rejection: >80 dBInput Filter: 41 Hz (SE), 82 Hz... -
Vendor: General Electric
IC694BEM321 I/O Link Master Module - GE Fanuc Emerson
GE Fanuc IC694BEM321 PACSystems RX3i I/O Link Master Module Key Features Model: IC694BEM321 Network Role: Master processor module for I/O Link networks I/O Capacity: 1024 inputs + 1024 outputs total across all slave devices Maximum Slave Connections: 16 slave modules Protocol: I/O Link over... -
Vendor: General Electric
IC694CEE001 GE Fanuc Emerson - Expansion Carrier
IC694 CEE001 Expansion Carrier Overview Model: IC694 ‒ Suffix: CEE001 is a dedicated CEP Expansion Carrier Module for GE Fanuc RX3i PacSystems, enabling PROFINET I/O LAN connectivity and remote node support. Key Technical Details Dimensions (HxWxD): 120 × 40 × 90 mm Weight: 0.15 kg Operating Voltage: 24 VDC ±10% Power... -
Vendor: General Electric
IC694CHS398 Backplane Module GE Fanuc Emerson
Key Specifications: Product Type: Serial Expansion Backplane Part Number: IC694CHS398 Number of Slots: 5 (for I/O and option modules) Compatible Universal Backplanes: 12-slot and 16-slot Power Supply Installation: Leftmost slot Hot Swapping: Not Supported Electrical and Physical Details: Maximum Load: 170 mA (0.85 Watts)... -
Vendor: General Electric
IC694DSM314 Motion Controller Module | GE Fanuc
Introducing the IC694 DSM314 (Motion Mate Module) for PACSystem RX3i & Series 90‑30. Seamlessly integrate advanced motion control in Standard or Follower modes with electronic CAM support. Model Suffix: DSM314 Compatible CPUs: All RX3i CPUs (v1.0+) and Series 90‑30 Installation: RX3i Serial Expansion Rack or Series 90‑30... -
Vendor: General Electric
IC694DSM324 Controller Module GE Fanuc Emerson
IC694DSM324 Motion Controller Module Model Suffix: DSM324 The suffix DSM denotes “Digital Servo Motion,” and 324 identifies the four‑axis capability and 13‑bit analog resolution. Key Features Axes: 1 to 4 programmable axes with individual encoder interfaces and home/overtravel inputs Firmware: 512 KB flash, upgradeable in‑field to support... -
Vendor: General Electric
IC694MDL231 - Isolated Input Module GE Fanuc
IC694MDL231 Isolated Input Module The IC694MDL231 is an 8‑point, 240 V AC isolated input module for PACSystem RX3i, engineered to reduce noise and ensure signal integrity in demanding industrial environments. Key Specifications Isolation Voltage: 250 VAC continuous field‑to‑backplane; 1500 VAC field‑to‑frame for 60 s On‑State Range: 148–264 VAC Off‑State Range:... -
Vendor: General Electric
IC694MDL240 - Discrete Input Module GE Fanuc
IC694MDL240 Discrete Input Module Core Specifications Channels: 16 discrete inputs Voltage Range: 0–132 VAC (nominal 120 VAC) Current Draw: 12 mA per channel; 90 mA total @ 5 VDC bus On‑State Voltage: 74–132 VAC Off‑State Voltage: 0–20 VAC Response Time: 30 ms on; 45 ms off Isolation: 250 VAC optical; 1500 VAC for 60 s LED Indicators:... -
Vendor: General Electric
IC694MDL241 AC Voltage Input Module - GE Fanuc
IC694MDL241 Input Module Core Specifications Channels: 16 isolated inputs Voltage Range: 24 V AC/DC ±10 % Input Current: 7 mA per channel Bus Draw: 80 mA @ 5 VDC backplane; 125 mA @ 24 V bus Frequency: 50–60 Hz Response Time: 20 ms on; 25 ms off Isolation: 250 VAC field‑to‑backplane; 1500 VAC field‑to‑frame for 60 s LED Indicators: 16... -
Vendor: General Electric
IC694MDL646 GE - RX3i DC Voltage Input Module
IC694MDL646 Technical Summary: Rated Input Voltage: 24 VDC Input Voltage Range: 0 to 30 VDC Input Current: 7 mA per point Power Usage: 80 mA from 5V bus, 125 mA from 24V source Response Time: 1 ms ON / 1 ms OFF ON-State Voltage:... -
Vendor: General Electric
IC694MDL741 Negative‑Logic Output Module | GE Fanuc
GE Fanuc - IC694MDL741 Negative‑Logic Output Module Core Specifications Channels: 16 (2 groups × 8) Voltage Range: 12–24 V DC (+20 / –15 % tolerance) Current: 0.5 A per channel, 2 A per group Isolation: 250 VAC continuous, 1500 VAC for 1 min (field↔backplane, group↔group, field↔frame) Response Time: 2 ms on/off Off‑State Leakage: ≤ 1 mA per channel Voltage Drop: ≤ 0.5 V... -
Vendor: General Electric
IC694MDL752 DC Voltage Output Module - GE Fanuc
GE Fanuc IC694MDL752 High-Density TTL/24VDC Output Module Key Features Voltage Modes: 5 VDC TTL or 12/24 VDC Output Channels: 32 discrete outputs Output Groups: 4 groups of 8 outputs Logic Type: Negative logic (sinking) Point-to-Point Isolation: Yes Dual Mode Operation: 4.75–5.25 VDC (TTL) or 10.2–28.8 VDC (12/24 VDC) Electrical...
Available 24/7 at
+86 15392429628
Vendor: Honeywell
51305907-175 Honeywell 16-Channel Low Level Multiplexer
Honeywell MC-TAMR04 51305907-175 Low Level Analog Input Multiplexer The Honeywell MC-TAMR04 51305907-175 provides reliable signal routing for low level analog inputs in industrial control systems. This 16-channel multiplexer ensures accurate signal switching with solid-state reliability. Electrical Specifications Input signal range: ±50mV to ±10V user...
Vendor: Foxboro
Foxboro FCP280 RH924WA Fiber Adapter
Foxboro FCP280 RH924WA Fiber Adapter Technical Specifications Power Specifications Input Voltage: 24V DC redundant power supply Power Consumption: 11W (single module with redundant adapters) Fault-Tolerant Power: 20W (redundant pair with network adapters) Power Protection: Reverse polarity and overvoltage protection Processing Performance Processor: ARM System on...
Vendor: Bently Nevada
PROXPAC XL Proximity Transducer 330880-16-40-037-03-02
Bently Nevada PROXPAC XL Proximity Transducer Manufacturer: Bently Nevada Product No.: 330880-16-40-037-03-02 Product Type: PROXPAC XL Proximity Transducer Made in: U.S.A Certificate Availability: Can add on Certificate Of Origin (COO) Probe and Configuration Options: Probe and Approvals Option: 16 (3300 XL 8 mm probe...
- Choosing a selection results in a full page refresh.