{"product_id":"129716-xxx-127-15-cn-bently-nevada-mod-166797-0316","title":"129716-XXX-127-15-CN Bently Nevada MOD 166797-0316","description":"\u003ch2\u003e\n\u003cstrong\u003eBently Nevada 129716-XXX-127-15-CN MOD 166797-0316\u003c\/strong\u003e Deep Mount Proximity Probe\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #cc0000;\"\u003e\u003cstrong\u003eManufacturer \u0026amp; Model:\u003c\/strong\u003e Bently Nevada \u003cstrong\u003e129716-XXX-127-15-CN MOD 166797-0316\u003c\/strong\u003e proximity probe\u003c\/span\u003e for 3300 XL series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Eddy current probe with extended 127mm case for deep machine casing mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Feature:\u003c\/strong\u003e Extra-long probe case reaches through thick walls or recessed ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Diameter:\u003c\/strong\u003e 8 mm standard 3300 XL size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 2 mm (80 mils) from target surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Choose the 127mm Extended Case\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard case length:\u003c\/strong\u003e Most 3300 XL probes have 45mm or 85mm cases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis probe offers:\u003c\/strong\u003e 127mm case for deep insertion applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon use case:\u003c\/strong\u003e Turbine casings with thick insulation layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnother use case:\u003c\/strong\u003e Recessed mounting ports below machine surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e No extension rod needed for most deep mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResult:\u003c\/strong\u003e Fewer connections means higher reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePhysical Dimensions for Deep Mounting\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal case length:\u003c\/strong\u003e 127 mm (5.0 inches) from mounting shoulder to tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded section:\u003c\/strong\u003e 3\/8-24 UNF, 25 mm long.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrench flats:\u003c\/strong\u003e 7\/8 inch (22.2 mm) for installation torque.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex nut included:\u003c\/strong\u003e Lock nut secures final probe position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion range:\u003c\/strong\u003e Adjustable 0 to 60 mm past mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum casing thickness:\u003c\/strong\u003e Works with walls up to 100 mm thick.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCable and Connector Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 1.5 meters (4.9 feet) - shorter than standard 5m or 9m cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy short cable:\u003c\/strong\u003e Ideal when proximitor mounts near the probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type:\u003c\/strong\u003e CN (standard 3300 XL coaxial connector).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo extension cable needed:\u003c\/strong\u003e Plugs directly into 330180-90-00 proximitor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable armor:\u003c\/strong\u003e Stainless steel braid resists abrasion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable jacket:\u003c\/strong\u003e FEP insulation for chemical resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMOD 166797-0316 Assembly Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOD number:\u003c\/strong\u003e 166797-0316 identifies this specific long-case assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included:\u003c\/strong\u003e Probe, attached 1.5m cable, CN connector, lock nut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e Factory calibrated as a complete assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not disassemble:\u003c\/strong\u003e Cable length is factory set for proper tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare part:\u003c\/strong\u003e Order complete assembly, not individual components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eElectrical Performance Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply needed:\u003c\/strong\u003e -24 Vdc nominal, accepts -17.5 to -26 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e Less than 12 mA from power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput at nominal gap (1.5mm):\u003c\/strong\u003e Approximately -10 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput at minimum gap (0.5mm):\u003c\/strong\u003e Approximately -2 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput at maximum gap (2.5mm):\u003c\/strong\u003e Approximately -18 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 50 ohms, drives up to 300 meters of cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Tips for Deep Mounting\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep 1:\u003c\/strong\u003e Thread probe into mounting hole by hand until tip touches shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep 2:\u003c\/strong\u003e Back probe out by 1.5 full turns (approx 1.5mm gap).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep 3:\u003c\/strong\u003e Tighten lock nut while holding probe position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep 4:\u003c\/strong\u003e Connect to proximitor and verify -10 Vdc output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque spec:\u003c\/strong\u003e 20 Nm (15 lb-ft) for lock nut maximum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over-tightening:\u003c\/strong\u003e Can damage threads or distort case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTemperature Limits by Component\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe tip (PEEK):\u003c\/strong\u003e -35°C to 177°C (-31°F to 350°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe case (316 SS):\u003c\/strong\u003e No limit within assembly rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable (FEP jacket):\u003c\/strong\u003e -35°C to 105°C (-31°F to 221°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector (CN type):\u003c\/strong\u003e -35°C to 85°C (-31°F to 185°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeakest link:\u003c\/strong\u003e Connector limits high temperature applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolution for higher temps:\u003c\/strong\u003e Use high-temp connector option (not this model).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications for 127mm Case\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteam turbines:\u003c\/strong\u003e Thick casing walls need longer reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas compressors:\u003c\/strong\u003e Recessed probe ports below housing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge pumps:\u003c\/strong\u003e Bearing housings with insulation layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaper mill rollers:\u003c\/strong\u003e Deep mounting bosses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWind turbine gearboxes:\u003c\/strong\u003e Thick casting walls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe assembly:\u003c\/strong\u003e \u003cstrong\u003e129716-XXX-127-15-CN\u003c\/strong\u003e with attached cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock nut:\u003c\/strong\u003e Matching 3\/8-24 UNF hex nut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumentation:\u003c\/strong\u003e Calibration certificate with sensitivity data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstruction sheet:\u003c\/strong\u003e Deep mount installation guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 0.4 kg (0.88 lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping box:\u003c\/strong\u003e 35 x 15 x 5 cm protective carton.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShipping Options\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFedEx Priority:\u003c\/strong\u003e 2-3 business days worldwide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPS Express:\u003c\/strong\u003e 2-4 business days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDHL International:\u003c\/strong\u003e 3-5 business days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRush available:\u003c\/strong\u003e Contact for same-day shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: When do I need the 127mm extended case probe?\u003c\/strong\u003e\u003cbr\u003eA: Use this probe when your machine casing thickness exceeds 50mm. Standard 85mm probes cannot reach through thick walls. The 127mm case provides extra 42mm of reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use an extension rod instead of this long probe?\u003c\/strong\u003e\u003cbr\u003eA: You could, but each connection adds tolerance error. A one-piece long probe is more accurate and reliable than probe-plus-extension-rod combinations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Why is the cable only 1.5 meters on this model?\u003c\/strong\u003e\u003cbr\u003eA: The short cable suits deep mount applications where the proximitor mounts near the probe. If you need longer cable, order a different -XXX code like -050 for 5 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What does XXX in the model number mean?\u003c\/strong\u003e\u003cbr\u003eA: XXX represents variable options like special coatings or non-standard thread. For standard 127mm case with 3\/8-24 thread and no coating, the code is typically 000.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How do I set the correct gap with this long probe?\u003c\/strong\u003e\u003cbr\u003eA: Screw probe in until tip touches shaft. Mark position on threads. Back out 1.5 turns (approximately 1.5mm gap). Tighten lock nut. Verify with voltmeter reading -10 Vdc.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47618097742082,"sku":"129716-XXX-127-15-CN","price":226.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/129716-XXX-127-15-CN.jpg?v=1775187861","url":"https:\/\/www.nex-auto.com\/de\/products\/129716-xxx-127-15-cn-bently-nevada-mod-166797-0316","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}