{"product_id":"2-meter-reverse-probe-146055-20-02-00-bently-nevada","title":"2 Meter Reverse Probe 146055-20-02-00 Bently Nevada","description":"\u003ch2\u003e\n\u003cstrong\u003eBently Nevada 146055-20-02-00\u003c\/strong\u003e | 2 Meter Ceramic Reverse Mount Probe\u003c\/h2\u003e\n\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/span\u003e | \u003cstrong\u003ePart Number:\u003c\/strong\u003e 146055-20-02-00 | \u003cstrong\u003eType:\u003c\/strong\u003e 3300 Ceramic Capped Reverse Mount Probe | \u003cstrong\u003eThread:\u003c\/strong\u003e 3\/8-24 UNF | \u003cstrong\u003eMade in:\u003c\/strong\u003e U.S.A.\u003c\/p\u003e\n\n\u003ch2\u003eModel Number Breakdown\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e146055:\u003c\/strong\u003e 3300 Ceramic Capped Reverse Mount Probe, 3\/8-24 UNF thread\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e20:\u003c\/strong\u003e Total cable length = 2.0 meters (6.6 feet)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e02:\u003c\/strong\u003e Miniature ClickLoc coaxial connector, standard cable\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e00:\u003c\/strong\u003e Agency approval = Not required (safe area only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 2.0 meters (6.6 feet)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8-24 UNF\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaximum Thread Engagement:\u003c\/strong\u003e 0.563 inch\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRPROBE at 2.0m:\u003c\/strong\u003e 7.88 ± 0.50 Ohms\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.52 mm (60 mils) from 0.25mm to 1.78mm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVoltage Range:\u003c\/strong\u003e -4 to -16 Vdc over linear range\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor:\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±6.5%\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2 Meter Cable Benefits\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eModerate length:\u003c\/strong\u003e Balance between signal strength and reach\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRPROBE at 2.0m:\u003c\/strong\u003e 7.88 Ohms (mid-range resistance)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlexible installation:\u003c\/strong\u003e Enough length for most local proximitor mounting\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtension ready:\u003c\/strong\u003e Add cables to reach 5m or 9m systems\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLow attenuation:\u003c\/strong\u003e Better than 5m or 9m probes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eReverse Mount Design\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eReverse Mount:\u003c\/strong\u003e Probe mounts from inside the machine casing outward\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTypical Application:\u003c\/strong\u003e Thrust position measurement, limited access areas\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCase Length:\u003c\/strong\u003e Fixed design (threads run to tip)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTip Material:\u003c\/strong\u003e Alumina ceramic (Al2O3) for wear resistance\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e 75 Ω coaxial, FEP insulated standard cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAgency Approval - None (00)\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSafe area only:\u003c\/strong\u003e Not certified for explosive atmospheres\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApproval option 00:\u003c\/strong\u003e No hazardous location certifications\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCost effective:\u003c\/strong\u003e Lower price without certification fees\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e General industrial environments, non-classified areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTemperature Ratings\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOperating \u0026amp; Storage:\u003c\/strong\u003e -51°C to +177°C (-60°F to +351°F)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature Class T1:\u003c\/strong\u003e -55°C to +232°C (EPL Ga\/Gc)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature Class T2:\u003c\/strong\u003e -55°C to +177°C\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature Class T3:\u003c\/strong\u003e -55°C to +120°C\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature Class T4:\u003c\/strong\u003e -55°C to +80°C\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature Class T5:\u003c\/strong\u003e -55°C to +40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePressure Rating\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStandard Pressure:\u003c\/strong\u003e 34 Bar (500 psi) nitrogen seal\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigher Pressure:\u003c\/strong\u003e Modifications available on request\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCustom Testing:\u003c\/strong\u003e Contact design department for pressure seal testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSystem Notes\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003eSpecifications apply to 3300 XL systems with -24 Vdc supply and AISI 4140 steel target\u003c\/li\u003e\n    \u003cli\u003eSystem accuracy and interchangeability do not apply with other target materials\u003c\/li\u003e\n    \u003cli\u003ePerformance measured at +18°C to +27°C (+64°F to +80°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e146055-20-02-00 ceramic capped reverse mount probe with 2.0m cable\u003c\/li\u003e\n    \u003cli\u003eClickLoc connector (standard cable)\u003c\/li\u003e\n    \u003cli\u003eCalibration certificate\u003c\/li\u003e\n    \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eShipping Information\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.5 kg (1.1 lb)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Protective box\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCarriers:\u003c\/strong\u003e FedEx, UPS, DHL (2-5 business days)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQ: What length options are available for reverse mount probes?\u003c\/strong\u003e\u003cbr\u003eA: Standard lengths are 0.5m, 1.0m, 2.0m, 5.0m, and 9.0m. The 2.0m option (146055-20-02-00) offers moderate reach with good signal strength. Choose based on your proximitor mounting distance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQ: Can I add extension cable to this 2.0m probe?\u003c\/strong\u003e\u003cbr\u003eA: Yes. Total system length (probe cable + extension) must match proximitor calibration. Example: 2.0m probe + 3.0m extension = 5.0m system. Example 2: 2.0m probe + 7.0m extension = 9.0m system.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQ: What is a reverse mount probe?\u003c\/strong\u003e\u003cbr\u003eA: Reverse mount probes install from inside the machine casing outward. Use for thrust position measurement, limited access areas, or when standard outside mounting is not possible due to space constraints.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe in hazardous locations?\u003c\/strong\u003e\u003cbr\u003eA: No. Option 00 means no hazardous location certifications. This probe is for safe area (non-classified) use only. For hazardous areas (Class I, Div 2 or Zone 2), choose option 05 (multiple approvals).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQ: What is the resistance difference between cable lengths?\u003c\/strong\u003e\u003cbr\u003eA: 0.5m = 7.45 Ohms, 1.0m = 7.59 Ohms, 2.0m = 7.88 Ohms, 5.0m = 8.73 Ohms, 9.0m = 9.87 Ohms. Longer cables have higher resistance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47661162594562,"sku":"146055-20-02-00","price":264.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/146055-20-02-00.jpg?v=1776151958","url":"https:\/\/www.nex-auto.com\/products\/2-meter-reverse-probe-146055-20-02-00-bently-nevada","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}