200151-20-03-10 Transducer Cable Bently Nevada

200151-20-03-10 Model Configuration Details

Base Series: 200151 - Dual-end connector accelerometer interface cable

Length Code (-20): 2.0 meters (78.7 inches) nominal operational length

Armor Option (-03): Reinforced blue PVC jacket with integrated armor layer

Coupling Nut (-10): Enhanced ergonomic grip design on both ends for secure tightening

Key Performance Specifications

Minimum Bend Radius: 63.5 mm (2.5 inches) - critical for preventing internal conductor damage

Operating Temperature: -20°C to +100°C (-4°F to +212°F) (flexible use); storage up to +121°C (+250°F)

Seal Rating: IP67 - dust-tight and water-resistant (1m submersion for 30 minutes max)

Cable Construction: 4-conductor 22 AWG; 85% braided shield coverage; nickel-plated coupling nuts

Armored Durability Features

Tensile Strength: 800N minimum - withstands 81.6kg (180lb) pulling force without deformation

Insulation Resistance: 1,500MΩ @500VDC - ensures stable signal integrity in high-moisture conditions

Flex Life: 15,000 cycles (90° bend at 63.5mm radius) - 50% longer than non-armored variants

EMI Shielding: 95% attenuation at 100MHz - superior interference protection in high-electromagnetic environments

Physical & Warranty Information

Weight: 0.68kg (1.50lb) - slightly heavier than non-armored models due to armor layer

Cure Time: 24 hours - recommended for optimal sealant performance post-installation

Warranty: 12-month limited warranty from purchase date (covers manufacturing defects)