{"product_id":"2300-20_kit-002-00-bently-nevada-2300-20-kit-single-channel-monitor","title":"2300\/20_KIT-002-00 Bently Nevada 2300\/20 Kit Single Channel Monitor","description":"\u003ch2\u003eSingle-channel monitoring kit for basic protection\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 2300\/20 Condition Monitoring System Kit configuration 002 provides a cost-effective entry point for machinery protection. This 2300\/20 package includes one accelerometer and your choice of housing. Bently Nevada designs this system for reliable 24\/7 operation in space-constrained applications.\u003c\/p\u003e\n\u003ch2\u003eKit contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2300\/20 monitor with LCD display\u003c\/li\u003e\n\u003cli\u003eOne AM3100T2-Z2 accelerometer sensor with 17 ft (5.2 m) cable\u003c\/li\u003e\n\u003cli\u003e6 ft (1.8 m) shielded Ethernet cable\u003c\/li\u003e\n\u003cli\u003eHousing: fiberglass (non-hazardous) or stainless steel (hazardous)\u003c\/li\u003e\n\u003cli\u003eDIN rail adapter included for flexible mounting\u003c\/li\u003e\n\u003cli\u003eShips via FedEx, UPS, or DHL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range: 0.2 Hz to 20 kHz configurable bandpass filter\u003c\/li\u003e\n\u003cli\u003eScale factor: 5 to 1000 mV\/g for acceleration, 5 to 1000 mV\/in\/s for velocity\u003c\/li\u003e\n\u003cli\u003eFull scale: 2 to 80 g peak acceleration, 0 to 50 in\/s peak velocity\u003c\/li\u003e\n\u003cli\u003eRadial vibration: 0 to 160 mil peak-peak with 5 to 1000 mV\/mil scaling\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±1% of full scale across all channels\u003c\/li\u003e\n\u003cli\u003eIndependent 24-bit ADCs on each input channel\u003c\/li\u003e\n\u003cli\u003eRPM range: 1 to 120,000 for proximity transducers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOutputs and communication\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 4-20 mA outputs with internal loop power, 0 to 600 Ω load\u003c\/li\u003e\n\u003cli\u003eTwo dry-contact relays: 6 A @ 250 Vac \/ 6 A @ 24 Vdc\u003c\/li\u003e\n\u003cli\u003eThree buffered BNC outputs for vibration and speed\u003c\/li\u003e\n\u003cli\u003eEthernet 10Base-T\/100Base-TX with RJ-45 connector\u003c\/li\u003e\n\u003cli\u003eStores 5 alarm captures during network outages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePower and environmental\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower input: 18 to 36 Vdc, max 7.5 W\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -30°C to +65°C (-22°F to +149°F)\u003c\/li\u003e\n\u003cli\u003eStorage: -40°C to +85°C (-40°F to +185°F)\u003c\/li\u003e\n\u003cli\u003eHumidity: Up to 95% non-condensing\u003c\/li\u003e\n\u003cli\u003eVibration limit: 3 g during operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions and indicators\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 76.2 mm x 127 mm x 127 mm (3 in x 5 in x 5 in)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.03 kg (2.26 lbs)\u003c\/li\u003e\n\u003cli\u003eLCD shows machine speed, vibration, setpoints, and config\u003c\/li\u003e\n\u003cli\u003eLEDs for OK, fault, bypass, relay status, and channel alarm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eData capture\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-event data: 10 minutes at 1 sec or 20 seconds at 100 ms\u003c\/li\u003e\n\u003cli\u003ePost-event data: 10 seconds at 100 ms or 1 minute at 1 sec\u003c\/li\u003e\n\u003cli\u003eSpectrum pre-event: 2.5 minutes at 10 sec intervals\u003c\/li\u003e\n\u003cli\u003eSpectrum post-event: 1 minute at 10 sec intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between configuration 001 and 002?\u003c\/strong\u003e\u003cbr\u003eConfiguration 002 includes one accelerometer and one housing. Configuration 001 includes two accelerometers and one housing. Both use the same 2300\/20 monitor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sensors work with the 2300\/20?\u003c\/strong\u003e\u003cbr\u003eThe 2300\/20 accepts ICP accelerometers, Velomitor, Proximitor, and magnetic pickups. This kit includes one AM3100T2-Z2 accelerometer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a second sensor later?\u003c\/strong\u003e\u003cbr\u003eYes. The 2300\/20 monitor supports two input channels. You can purchase and install a second AM3100T2-Z2 sensor with cable at any time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. You need a 24 Vdc power supply (18-36 Vdc range). The kit excludes the power supply so you can select your preferred brand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I mount the monitor?\u003c\/strong\u003e\u003cbr\u003eThe kit includes a DIN rail adapter. You can also panel mount it using the integral mounting points.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47424055410946,"sku":"2300\/20_KIT-002-00","price":652.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/2300_20_KIT-002-00.jpg?v=1772436178","url":"https:\/\/www.nex-auto.com\/products\/2300-20_kit-002-00-bently-nevada-2300-20-kit-single-channel-monitor","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}