2300/20_KIT-002-00 Bently Nevada 2300/20 Kit Single Channel Monitor

Single-channel monitoring kit for basic protection

The Bently Nevada 2300/20 Condition Monitoring System Kit configuration 002 provides a cost-effective entry point for machinery protection. This 2300/20 package includes one accelerometer and your choice of housing. Bently Nevada designs this system for reliable 24/7 operation in space-constrained applications.

Kit contents

• 2300/20 monitor with LCD display
• One AM3100T2-Z2 accelerometer sensor with 17 ft (5.2 m) cable
• 6 ft (1.8 m) shielded Ethernet cable
• Housing: fiberglass (non-hazardous) or stainless steel (hazardous)
• DIN rail adapter included for flexible mounting
• Ships via FedEx, UPS, or DHL

Key technical specifications

• Frequency range: 0.2 Hz to 20 kHz configurable bandpass filter
• Scale factor: 5 to 1000 mV/g for acceleration, 5 to 1000 mV/in/s for velocity
• Full scale: 2 to 80 g peak acceleration, 0 to 50 in/s peak velocity
• Radial vibration: 0 to 160 mil peak-peak with 5 to 1000 mV/mil scaling
• Accuracy: ±1% of full scale across all channels
• Independent 24-bit ADCs on each input channel
• RPM range: 1 to 120,000 for proximity transducers

Outputs and communication

• Two 4-20 mA outputs with internal loop power, 0 to 600 Ω load
• Two dry-contact relays: 6 A @ 250 Vac / 6 A @ 24 Vdc
• Three buffered BNC outputs for vibration and speed
• Ethernet 10Base-T/100Base-TX with RJ-45 connector
• Stores 5 alarm captures during network outages

Power and environmental

• Power input: 18 to 36 Vdc, max 7.5 W
• Operating temperature: -30°C to +65°C (-22°F to +149°F)
• Storage: -40°C to +85°C (-40°F to +185°F)
• Humidity: Up to 95% non-condensing
• Vibration limit: 3 g during operation

Dimensions and indicators

• Size: 76.2 mm x 127 mm x 127 mm (3 in x 5 in x 5 in)
• Weight: 1.03 kg (2.26 lbs)
• LCD shows machine speed, vibration, setpoints, and config
• LEDs for OK, fault, bypass, relay status, and channel alarm

Data capture

• Pre-event data: 10 minutes at 1 sec or 20 seconds at 100 ms
• Post-event data: 10 seconds at 100 ms or 1 minute at 1 sec
• Spectrum pre-event: 2.5 minutes at 10 sec intervals
• Spectrum post-event: 1 minute at 10 sec intervals

Frequently asked questions

What is the difference between configuration 001 and 002?
Configuration 002 includes one accelerometer and one housing. Configuration 001 includes two accelerometers and one housing. Both use the same 2300/20 monitor.

What sensors work with the 2300/20?
The 2300/20 accepts ICP accelerometers, Velomitor, Proximitor, and magnetic pickups. This kit includes one AM3100T2-Z2 accelerometer.

Can I add a second sensor later?
Yes. The 2300/20 monitor supports two input channels. You can purchase and install a second AM3100T2-Z2 sensor with cable at any time.

Do I need a separate power supply?
Yes. You need a 24 Vdc power supply (18-36 Vdc range). The kit excludes the power supply so you can select your preferred brand.

How do I mount the monitor?
The kit includes a DIN rail adapter. You can also panel mount it using the integral mounting points.