{"product_id":"3300-xl-probe-bently-nevada-330192-00-08-05-00","title":"3300 XL Probe Bently Nevada 330192-00-08-05-00","description":"\u003ch2\u003e\n\u003cstrong\u003eBently Nevada 330192-00-08-05-00\u003c\/strong\u003e Ultra Short 3300 XL ETR Probe\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cspan style=\"color: #cc0000;\"\u003e\u003cstrong\u003eManufacturer \u0026amp; Model:\u003c\/strong\u003e Bently Nevada \u003cstrong\u003e330192-00-08-05-00\u003c\/strong\u003e ETR probe\u003c\/span\u003e for 3300 XL series.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 8 mm Eddy Current Transducer with stainless steel armor.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3\/8-24 UNF.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThe Shortest 3300 XL Probe Available\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e Only 0.8 inches (20.3 mm).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 0.5 meter (1.6 feet).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUnthreaded section:\u003c\/strong\u003e Zero - threads start immediately.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTotal protrusion:\u003c\/strong\u003e Less than 1 inch from mounting surface.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIndustry comparison:\u003c\/strong\u003e Standard probes start at 2.8 inches.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUnique position:\u003c\/strong\u003e No shorter 8mm armored probe exists in 3300 XL line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDesigned for Impossible Spaces\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThin casings:\u003c\/strong\u003e Works on walls as thin as 0.2 inches (5mm).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCrowded machinery:\u003c\/strong\u003e Fits between gears, bearings, or housings.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRetrofit nightmare:\u003c\/strong\u003e Replaces probes in original tight designs.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTest stands:\u003c\/strong\u003e Temporary mounting on small rotating rigs.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePortable kits:\u003c\/strong\u003e Short probe stores easily in carrying case.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOEM integration:\u003c\/strong\u003e Built into compact new equipment designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaximum Wall Thickness Calculator\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e 0.8 inches total.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMinimum thread engagement:\u003c\/strong\u003e 0.5 inches required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGap needed:\u003c\/strong\u003e 0.06 inches (1.5mm) to shaft.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRemaining for wall:\u003c\/strong\u003e 0.8 - 0.5 - 0.06 = 0.24 inches.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSafe maximum wall:\u003c\/strong\u003e 0.2 inches (5mm).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWarning:\u003c\/strong\u003e Do not use on walls thicker than 0.2 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat 0.8 Inch Case Looks Like\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVisual:\u003c\/strong\u003e Slightly longer than a typical thimble.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThreads:\u003c\/strong\u003e 3\/8-24 UNF along entire 0.8 inches.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTip to shoulder:\u003c\/strong\u003e Only 20mm distance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWrench flats:\u003c\/strong\u003e 7\/8 inch hex at shoulder.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLock nut:\u003c\/strong\u003e Standard nut extends past case when installed.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector end:\u003c\/strong\u003e Same as all 3300 XL probes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eZero Unthreaded Section Reality\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhy zero unthreaded:\u003c\/strong\u003e No room for smooth section on 0.8in case.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThreads to tip:\u003c\/strong\u003e Last thread ends at probe tip face.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSealing method:\u003c\/strong\u003e Thread sealant mandatory (PTFE tape or pipe dope).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNo crush washer:\u003c\/strong\u003e Impossible due to no smooth shoulder area.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRule verification:\u003c\/strong\u003e 0.8in case - 0in unthreaded = 0.8in difference.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRequirement:\u003c\/strong\u003e Difference must be at least 0.8in. Exactly meets minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eElectrical Data\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRPROBE at 0.5m:\u003c\/strong\u003e 7.45 ± 0.50 Ω.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSame as 2.8in case 0.5m:\u003c\/strong\u003e Identical electrical performance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eShortest cable:\u003c\/strong\u003e Minimal signal loss over 0.5m.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLowest possible resistance:\u003c\/strong\u003e Only 0.5m of conductor.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNoise immunity:\u003c\/strong\u003e Best among all cable lengths.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtension ready:\u003c\/strong\u003e Add cables to reach desired total length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Challenge\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWrench access:\u003c\/strong\u003e Very little space for 7\/8 inch wrench.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinger tight first:\u003c\/strong\u003e Thread into port by hand.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinal tighten:\u003c\/strong\u003e 1\/4 turn with thin profile wrench.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGap setting difficulty:\u003c\/strong\u003e Hard to see tip due to short length.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e Use depth micrometer or gap tool.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLock nut:\u003c\/strong\u003e May overhang past case - normal for this probe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eArmor on Ultra Short Cable\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eArmor type:\u003c\/strong\u003e AISI 302 stainless steel braid.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Full 0.5 meter coverage.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlexibility:\u003c\/strong\u003e Very flexible due to short length.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBend radius:\u003c\/strong\u003e 40mm minimum (tightest of all lengths).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConduit:\u003c\/strong\u003e 1\/2 inch conduit sufficient.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Lightest armored probe Bently makes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePressure Seal Facts\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSame Viton O-ring:\u003c\/strong\u003e No difference from longer probes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUltra short case:\u003c\/strong\u003e Seal located near tip as usual.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNo factory test:\u003c\/strong\u003e Standard untested seal.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLow pressure OK:\u003c\/strong\u003e Fine for most applications under 300 psi.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh pressure:\u003c\/strong\u003e Request custom pressure test service.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCold warning:\u003c\/strong\u003e Below -34°C, seal may fail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTemperature Limits\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eContinuous operating:\u003c\/strong\u003e -52°C to +177°C.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eShort term tip:\u003c\/strong\u003e Up to +218°C.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable limit:\u003c\/strong\u003e +260°C for extended version.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSeal cold limit:\u003c\/strong\u003e -34°C before potential failure.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSame as all probes:\u003c\/strong\u003e No temperature disadvantage from short case.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHeat dissipation:\u003c\/strong\u003e Short case may run slightly cooler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTemperature Class Reference\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGas T1:\u003c\/strong\u003e 232°C surface, -55 to +232°C ambient.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGas T2:\u003c\/strong\u003e 177°C surface, -55 to +177°C ambient.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGas T3:\u003c\/strong\u003e 120°C surface, -55 to +120°C ambient.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGas T4:\u003c\/strong\u003e 80°C surface, -55 to +80°C ambient.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGas T5:\u003c\/strong\u003e 40°C surface, -55 to +40°C ambient.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDust class:\u003c\/strong\u003e Surface temperature depends on ambient.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProximitor:\u003c\/strong\u003e 3300 XL 8mm (330180-90-00) only.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtension cables:\u003c\/strong\u003e 3300 XL series only.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTotal length calculation:\u003c\/strong\u003e 0.5m probe + extension = system total.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExample:\u003c\/strong\u003e 0.5m probe + 4.5m extension = 5.0m system.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Standard 3300 XL coaxial.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTarget:\u003c\/strong\u003e AISI 4140 steel calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProbe:\u003c\/strong\u003e \u003cstrong\u003e330192-00-08-05-00\u003c\/strong\u003e with 0.5m armored cable.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLock nut:\u003c\/strong\u003e 3\/8-24 UNF hex nut (may extend past case).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCalibration certificate:\u003c\/strong\u003e Individual sensitivity data.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstruction sheet:\u003c\/strong\u003e Special notes for ultra short probe.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector cap:\u003c\/strong\u003e Plastic protector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 kg (0.55 lb).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Small cardboard tube.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTube size:\u003c\/strong\u003e 25 x 25 x 180 mm.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCarriers:\u003c\/strong\u003e FedEx, UPS, DHL.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDelivery:\u003c\/strong\u003e 2-5 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQ: What is the absolute minimum wall thickness for this probe?\u003c\/strong\u003e\u003cbr\u003e\n    A: The probe works on walls as thin as 0.1 inches (2.5mm) if the port has full threads. However, the lock nut needs about 0.2 inches of thread to grip. For walls under 0.2 inches, use a backing nut on the inside of the casing.\u003c\/li\u003e\n    \n    \u003cli\u003e\n\u003cstrong\u003eQ: Why does this probe exactly meet the 0.8 inch unthreaded rule instead of exceeding it?\u003c\/strong\u003e\u003cbr\u003e\n    A: The rule requires unthreaded length to be at least 0.8 inches less than case length. With 0.8 inch case and zero unthreaded, the difference is exactly 0.8 inches. Bently Nevada allows this as the minimum acceptable configuration. Do not use any shorter case.\u003c\/li\u003e\n    \n    \u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe on a standard thickness bearing housing?\u003c\/strong\u003e\u003cbr\u003e\n    A: No. Standard bearing housings are 1.5 to 2.5 inches thick. This 0.8 inch probe cannot reach through those walls. Use this probe only on very thin casings or surface mount adapter plates.\u003c\/li\u003e\n    \n    \u003cli\u003e\n\u003cstrong\u003eQ: How do I set the gap when the tip is hard to see?\u003c\/strong\u003e\u003cbr\u003e\n    A: Use a depth gauge. Measure from mounting surface to shaft. Subtract probe case length (0.8in). The difference is your gap. Adjust until gap reads 0.06 inches (1.5mm). Alternatively, use a dial indicator on the probe tip.\u003c\/li\u003e\n    \n    \u003cli\u003e\n\u003cstrong\u003eQ: Is this probe weaker or less reliable due to short case?\u003c\/strong\u003e\u003cbr\u003e\n    A: No. The internal electronics and sensing coil are identical to longer 3300 XL probes. Only the stainless steel case is shorter. Reliability, accuracy, and temperature rating match standard probes. The short case actually improves rigidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47618961047810,"sku":"330192-00-08-05-00","price":224.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/330192-00-08-05-00.jpg?v=1775207558","url":"https:\/\/www.nex-auto.com\/products\/3300-xl-probe-bently-nevada-330192-00-08-05-00","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}