{"product_id":"330101-00-77-20-02-00-3300-xl-probe-bently-nevada","title":"330101-00-77-20-02-00 3300 XL Probe - Bently Nevada","description":"\u003ch2\u003e\u003cstrong\u003e330101-00-77-20-02-00 – Bently Nevada 3300 XL 8 mm Probe (Without Armor)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Measurement Range:\u003c\/strong\u003e The linear range spans 2 mm (80 mils). This range starts 0.25 mm (10 mils) from the target. It extends from 0.25 mm to 2.3 mm (10 to 90 mils). The output voltage covers approximately –1 to –17 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting for Radial Vibration:\u003c\/strong\u003e Set the gap at -9 Vdc. This equals roughly 1.27 mm (50 mils). This setting ensures optimal performance for most machinery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF) for 5 or 1 Meter System:\u003c\/strong\u003e The scale factor is 7.87 V\/mm (200 mV\/mil) ±5%. This includes interchangeability error. We measure this over 0.25 mm (10 mils) increments across the 80 mil range. Temperature range applies from 0°C to +45°C (+32°F to +113°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor for 9 Meter System:\u003c\/strong\u003e The value is 7.87 V\/mm (200 mV\/mil) ±6.5%. Conditions are the same as above. This maintains accuracy in longer cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL) – Standard 5 or 1 Meter System:\u003c\/strong\u003e Less than ±0.025 mm (±1 mil). This holds at 0°C to +45°C (+32°F to +113°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSL for Standard 9 Meter System:\u003c\/strong\u003e Less than ±0.038 mm (±1.5 mil) under the same temperature range. Extended temperature range systems also follow this spec.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance (RPROBE):\u003c\/strong\u003e For a 2.0 meter probe length, resistance is 7.88 ± 0.50 Ω. Measure between center conductor and outer conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Capacitance:\u003c\/strong\u003e Typical capacitance equals 69.9 pF\/m (21.3 pF\/ft). This supports signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring Recommendations:\u003c\/strong\u003e Use 0.2 to 1.5 mm² (16 to 24 AWG) wires. We recommend a 3-conductor shielded triad cable with tinned wiring. Maximum field wiring length is 305 meters (1,000 feet) between the 3300 XL Proximitor Sensor and monitor. Refer to frequency response graphs for high-frequency signal rolloff.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS) provides excellent chemical resistance. This material also ensures durable encapsulation of the probe coil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 303 or 304 stainless steel (SST) offers strength and corrosion resistance. The larger diameter case enhances ruggedness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight per Unit Length:\u003c\/strong\u003e 323 g\/m (11.4 oz). This weight indicates solid construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating and Storage Temperature – Standard Probe:\u003c\/strong\u003e Range from -52°C to +177°C (-62°F to +350°F). Avoid exposing the probe below –34°C (–30°F) to prevent premature pressure seal failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Temperature Range Probe:\u003c\/strong\u003e Probe tip withstands -52°C to +218°C (-62°F to +425°F). Cable and connector operate from -51°C to +260°C (-60°F to +500°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Sealing Capability:\u003c\/strong\u003e A Viton® O-ring seals differential pressure between probe tip and case. We do not pressure test probes before shipment. Contact the custom design department for application-specific pressure testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is this probe brand new and original?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we provide a \u003cstrong\u003e330101-00-77-20-02-00\u003c\/strong\u003e that is 100% new and original from Bently Nevada. No refurbished or counterfeit parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the exact linear range for this 3300 XL 8 mm probe?\u003c\/strong\u003e\u003cbr\u003eA: The linear range is 2 mm (80 mils). It starts at 0.25 mm (10 mils) from the target and ends at 2.3 mm (90 mils). Output voltage spans –1 to –17 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe with a 9 meter extension cable?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The standard 9 meter system has an ISF of 7.87 V\/mm ±6.5%. The deviation remains less than ±0.038 mm within 0°C to +45°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What shipping methods do you offer?\u003c\/strong\u003e\u003cbr\u003eA: We ship via FedEx, UPS, and DHL. All carriers provide tracking and reliable delivery worldwide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How long does delivery take?\u003c\/strong\u003e\u003cbr\u003eA: We dispatch all orders within 5 business days. Delivery time depends on your location and chosen carrier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you have stock available?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we keep the \u003cstrong\u003e330101-00-77-20-02-00\u003c\/strong\u003e in stock. We can ship promptly after order confirmation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the return policy?\u003c\/strong\u003e\u003cbr\u003eA: We accept returns within 30 days of delivery. Items must be unused and in original condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What temperature range can the probe tip withstand for extended range version?\u003c\/strong\u003e\u003cbr\u003eA: The extended temperature range probe tip handles -52°C to +218°C (-62°F to +425°F). Cable and connector handle -51°C to +260°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does the probe resist humidity?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The ASF changes less than 3% after 56 days at 93% relative humidity per IEC 68 2 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I order the FluidLoc option?\u003c\/strong\u003e\u003cbr\u003eA: This specific model \u003cstrong\u003e330101-00-77-20-02-00\u003c\/strong\u003e does not include FluidLoc. Please contact us for custom orders with FluidLoc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e© 2026 NexAuto Technology Limited. All rights reserved.\u003cbr\u003eOriginal Source: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003cbr\u003eContact: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e\u003cbr\u003ePhone: \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/wa.me\/8615392429628\" target=\"_blank\"\u003e+86 153 9242 9628\u003c\/a\u003e (Click to chat on WhatsApp)\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47618531492098,"sku":"330101-00-77-20-02-00","price":263.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/330101-00-77-20-02-00.jpg?v=1784280032","url":"https:\/\/www.nex-auto.com\/products\/330101-00-77-20-02-00-3300-xl-probe-bently-nevada","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}