330103-00-10-50-02-00 Bently Nevada 3300 XL 5 Meter

Bently Nevada 3300 XL 8 mm Proximity Probe
Model: 330103-00-10-50-02-00

• Manufacturer: Bently Nevada — 3300 XL series delivers industry-standard eddy-current vibration monitoring for critical rotating machinery.
• Part number 330103-00-10-50-02-00 represents a fully configured 8 mm probe with M10 x 1 thread, unarmored, 0 mm unthreaded tip (flush), 100 mm case length, and 5.0 m total cable.
• Important: This 5-meter probe is designed for use with the 5 meter Proximitor sensor only.
• This configuration includes miniature ClickLoc coaxial connector with standard cable (option 02).
• Agency approval option 00 means this unit ships without formal certification — ideal for non-hazardous industrial installations.
• 330103-00-10-50-02-00 provides 2 mm linear range and operates from -52°C to +177°C.

Key technical specifications

• Linear range: 2 mm (80 mils), from 0.25 to 2.3 mm target gap.
• Output signal: -1 to -17 Vdc, recommended vibration gap -9 Vdc (1.27 mm).
• Probe DC resistance: 8.73 Ω ± 0.50 (for 5.0 m length).
• Frequency response: supports field wiring up to 305 m with minimal signal roll-off.
• Tip material: Polyphenylene sulfide (PPS); case material AISI 303/304 stainless steel.
• Temperature range: standard -52°C to +177°C; extended cable version available up to +260°C.
• Relative humidity: less than 3% ASF change after 56 days at 93% humidity.
• Pressure seal: Viton O-ring, differential pressure design.

Torque specifications

• Standard forward mounted probes: Maximum rated torque 33.9 N•m (300 in•lbf), recommended 11.2 N•m (100 in•lbf).
• First three threads: Maximum rated torque 22.6 N•m (200 in•lbf), recommended 7.5 N•m (66 in•lbf).
• Thread engagement: Maximum 15 mm for M10 x 1 case thread.

Temperature classifications

• For EPL Ga and Gc: T1 (-55°C to +232°C), T2 (-55°C to +177°C), T3 (-55°C to +120°C), T4 (-55°C to +80°C), T5 (-55°C to +40°C).
• For EPL Dc: T280°C @ Ta (-55°C to +232°C), T225°C @ Ta (-55°C to +177°C), T170°C @ Ta (-55°C to +120°C), T130°C @ Ta (-55°C to +80°C), T105°C @ Ta (-55°C to +100°C), T90°C @ Ta (-55°C to +40°C).

Package contents

• One 330103-00-10-50-02-00 probe with integral standard cable and ClickLoc connector.
• Factory configuration: 0 mm unthreaded tip (flush), 100 mm case thread, 5.0 m total length.
• Weight: 323 g per meter (11.4 oz per meter) — approximately 1.615 kg for 5.0 m.
• Shipping: FedEx, UPS, or DHL express delivery.

Installation guidelines

• Use 3-conductor shielded triad field wire, 16 to 24 AWG (0.2 to 1.5 mm²).
• Maximum extension between probe and monitor: 305 meters (1000 feet).
• Thread engagement: maximum 15 mm for M10 x 1 case thread.
• For intrinsically safe applications, use approved barriers per drawing 141092.
• Non-incendive installations follow drawing 140979 for Class I, Zone 2.
• Compatibility note: This 5-meter probe must be used with a 5 meter Proximitor sensor only.

Frequently asked questions

What makes 330103-00-10-50-02-00 unique?
This model features a 0 mm unthreaded tip (flush face) and 5.0 meter cable length. It is designed for installations requiring long cable runs to the Proximitor.

Why must this probe be used with a 5 meter Proximitor?
The 5.0 m cable length has specific resistance characteristics (8.73 Ω). Matching it with the correct Proximitor ensures accurate signal calibration and linear range.

What does 00 unthreaded length mean?
Option 00 means zero unthreaded length — the PPS tip starts immediately at the end of the case thread. This provides a flush mounting configuration.

What is the correct torque for installation?
Apply 11.2 N•m (100 in•lbf) for standard mounting. Do not exceed 33.9 N•m maximum. For the first three threads, use 7.5 N•m.

Can I use this probe in high-temperature areas?
Yes, the standard range covers -52°C to +177°C. Refer to the temperature classification table for specific T-rating limits based on ambient temperature.

Contact information

Sales inquiries: sales@nex-auto.com
WhatsApp: +86 153 9242 9628

Partner: AutoNex Controls Limited