{"product_id":"330104-00-04-05-02-00-bently-nevada-3300-xl-8mm-probe","title":"330104-00-04-05-02-00 Bently Nevada 3300 XL 8mm Probe","description":"\u003ch2\u003e\u003cstrong\u003e330104-00-04-05-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #3366cc;\"\u003eMeasurement linear range:\u003c\/strong\u003e 2 mm (80 mils) from 0.25 mm to 2.3 mm (10 to 90 mils). The output voltage spans approximately –1 Vdc to –17 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #3366cc;\"\u003eRecommended gap setting:\u003c\/strong\u003e –9 Vdc, which equals roughly 1.27 mm (50 mils) for radial vibration measurements. This setting ensures optimal sensitivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #3366cc;\"\u003eNominal probe DC resistance:\u003c\/strong\u003e 7.45 ± 0.50 Ω for the 0.5 meter (1.6 feet) total length. The center conductor to outer conductor resistance defines this value.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #3366cc;\"\u003eField wiring length maximum:\u003c\/strong\u003e 305 meters (1,000 feet) between the 3300 XL Proximitor Sensor and the monitor. Use 0.2 to 1.5 mm² (16 to 24 AWG) 3-conductor shielded triad cable for best results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #3366cc;\"\u003eFrequency response consideration:\u003c\/strong\u003e Long field wiring causes signal rolloff at high frequencies. Refer to standard frequency response graphs for exact performance data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications of the 3300 XL 8 mm Probe\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada. \u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330104-00-04-05-02-00\u003c\/strong\u003e. \u003cstrong\u003eProduct type:\u003c\/strong\u003e 3300 XL 8 mm Proximity Probes, Metric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe thread and armor:\u003c\/strong\u003e M10 x 1 thread with armor. Unthreaded length is 0 mm. Overall case length option 04 = 40 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal length option:\u003c\/strong\u003e 05 = 0.5 meter (1.6 feet). Connector and cable type: Miniature coaxial ClickLoc connector with standard cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency approval option:\u003c\/strong\u003e 00 = Not required. Probe tip material: Polyphenylene sulfide (PPS). Probe case material: AISI 303 or 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe pressure sealing:\u003c\/strong\u003e The design seals differential pressure between tip and case. A Viton® O-ring provides the seal. The manufacturer does not pressure test each unit before shipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe case torque values:\u003c\/strong\u003e Maximum rated torque = 33.9 N•m (300 in•lbf). Recommended torque = 11.2 N•m (100 in•lbf).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe mass:\u003c\/strong\u003e 323 g per meter (11.4 oz per foot). Maximum length of thread engagement: 15 mm for the M10x1 thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating and storage temperature range (standard probe):\u003c\/strong\u003e –52°C to +177°C (–62°F to +350°F). Extended temperature range probe tip handles –52°C to +218°C (–62°F to +425°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant temperature note:\u003c\/strong\u003e Exposure below –34°C (–30°F) may cause premature pressure seal failure. The probe cable and connector for extended range withstand –51°C to +260°C (–60°F to +500°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative humidity performance:\u003c\/strong\u003e Less than 3% change in Average Scale Factor (ASF) when tested at 93% humidity per IEC 68-2-3 for up to 56 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsically safe certification:\u003c\/strong\u003e \u003cstrong\u003e330104-00-04-05-02-00\u003c\/strong\u003e works with zener barriers (drawing 141092) or galvanic isolators. It meets Class I, Zone 0: AEx\/Ex ia IIC T5…T1 Ga; Class I, Groups A,B,C,D; Class II, Groups E,F,G; Class III.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-incendive compliance:\u003c\/strong\u003e When installed per drawing 140979, it qualifies for Class I, Zone 2: AEx\/Ex nA IIC T5…T1 Gc; Class I, Division 2, Groups A,B,C,D; and AEx\/Ex ec IIC T5…T1 Gc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is this product brand new and original?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we supply only brand new, original Bently Nevada \u003cstrong\u003e330104-00-04-05-02-00\u003c\/strong\u003e probes. They come from factory-sealed stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you have the \u003cstrong\u003e330104-00-04-05-02-00\u003c\/strong\u003e in stock?\u003c\/strong\u003e\u003cbr\u003eA: We keep this model in stock. Availability is stable for immediate orders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the lead time for shipping?\u003c\/strong\u003e\u003cbr\u003eA: We ship within 5 business days after order confirmation. Most orders leave sooner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Which carriers do you use for delivery?\u003c\/strong\u003e\u003cbr\u003eA: We use FedEx, UPS, and DHL. You can choose the most convenient option at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is your return policy?\u003c\/strong\u003e\u003cbr\u003eA: We support returns within 30 days of delivery. The probe must remain unused and in original condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe in a high-humidity environment?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the 3300 XL probe changes less than 3% in ASF after 56 days at 93% humidity per IEC 68-2-3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does the probe seal against pressure differential?\u003c\/strong\u003e\u003cbr\u003eA: Yes, it uses a Viton® O-ring to seal between tip and case. However, Bently Nevada does not pressure test each probe before shipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the maximum field wiring length for the \u003cstrong\u003e330104-00-04-05-02-00\u003c\/strong\u003e?\u003c\/strong\u003e\u003cbr\u003eA: You can use up to 305 meters (1,000 feet) between the Proximitor Sensor and monitor. Longer cables reduce high-frequency signals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e© 2026 NexAuto Technology Limited. All rights reserved.\u003cbr\u003eOriginal Source: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003cbr\u003eContact: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e\u003cbr\u003ePhone: \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/wa.me\/8615392429628\" target=\"_blank\"\u003e+86 153 9242 9628\u003c\/a\u003e (WhatsApp)\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47865304809730,"sku":"330104-00-04-05-02-00","price":236.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/330104-00-04-05-02-00-3.jpg?v=1779866568","url":"https:\/\/www.nex-auto.com\/products\/330104-00-04-05-02-00-bently-nevada-3300-xl-8mm-probe","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}