330104-00-04-05-02-00 Bently Nevada 3300 XL 8mm Probe

330104-00-04-05-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe

• Measurement linear range: 2 mm (80 mils) from 0.25 mm to 2.3 mm (10 to 90 mils). The output voltage spans approximately –1 Vdc to –17 Vdc.
• Recommended gap setting: –9 Vdc, which equals roughly 1.27 mm (50 mils) for radial vibration measurements. This setting ensures optimal sensitivity.
• Nominal probe DC resistance: 7.45 ± 0.50 Ω for the 0.5 meter (1.6 feet) total length. The center conductor to outer conductor resistance defines this value.
• Field wiring length maximum: 305 meters (1,000 feet) between the 3300 XL Proximitor Sensor and the monitor. Use 0.2 to 1.5 mm² (16 to 24 AWG) 3-conductor shielded triad cable for best results.
• Frequency response consideration: Long field wiring causes signal rolloff at high frequencies. Refer to standard frequency response graphs for exact performance data.

Technical Specifications of the 3300 XL 8 mm Probe

• Manufacturer: Bently Nevada. Model: 330104-00-04-05-02-00. Product type: 3300 XL 8 mm Proximity Probes, Metric.
• Probe thread and armor: M10 x 1 thread with armor. Unthreaded length is 0 mm. Overall case length option 04 = 40 mm.
• Total length option: 05 = 0.5 meter (1.6 feet). Connector and cable type: Miniature coaxial ClickLoc connector with standard cable.
• Agency approval option: 00 = Not required. Probe tip material: Polyphenylene sulfide (PPS). Probe case material: AISI 303 or 304 stainless steel (SST).
• Probe pressure sealing: The design seals differential pressure between tip and case. A Viton® O-ring provides the seal. The manufacturer does not pressure test each unit before shipment.
• Probe case torque values: Maximum rated torque = 33.9 N•m (300 in•lbf). Recommended torque = 11.2 N•m (100 in•lbf).
• Probe mass: 323 g per meter (11.4 oz per foot). Maximum length of thread engagement: 15 mm for the M10x1 thread.
• Operating and storage temperature range (standard probe): –52°C to +177°C (–62°F to +350°F). Extended temperature range probe tip handles –52°C to +218°C (–62°F to +425°F).
• Important temperature note: Exposure below –34°C (–30°F) may cause premature pressure seal failure. The probe cable and connector for extended range withstand –51°C to +260°C (–60°F to +500°F).
• Relative humidity performance: Less than 3% change in Average Scale Factor (ASF) when tested at 93% humidity per IEC 68-2-3 for up to 56 days.
• Intrinsically safe certification: 330104-00-04-05-02-00 works with zener barriers (drawing 141092) or galvanic isolators. It meets Class I, Zone 0: AEx/Ex ia IIC T5…T1 Ga; Class I, Groups A,B,C,D; Class II, Groups E,F,G; Class III.
• Non-incendive compliance: When installed per drawing 140979, it qualifies for Class I, Zone 2: AEx/Ex nA IIC T5…T1 Gc; Class I, Division 2, Groups A,B,C,D; and AEx/Ex ec IIC T5…T1 Gc.

Frequently Asked Questions (FAQ)

• Q: Is this product brand new and original?
  A: Yes, we supply only brand new, original Bently Nevada 330104-00-04-05-02-00 probes. They come from factory-sealed stock.
• Q: Do you have the 330104-00-04-05-02-00 in stock?
  A: We keep this model in stock. Availability is stable for immediate orders.
• Q: What is the lead time for shipping?
  A: We ship within 5 business days after order confirmation. Most orders leave sooner.
• Q: Which carriers do you use for delivery?
  A: We use FedEx, UPS, and DHL. You can choose the most convenient option at checkout.
• Q: What is your return policy?
  A: We support returns within 30 days of delivery. The probe must remain unused and in original condition.
• Q: Can I use this probe in a high-humidity environment?
  A: Yes, the 3300 XL probe changes less than 3% in ASF after 56 days at 93% humidity per IEC 68-2-3.
• Q: Does the probe seal against pressure differential?
  A: Yes, it uses a Viton® O-ring to seal between tip and case. However, Bently Nevada does not pressure test each probe before shipping.
• Q: What is the maximum field wiring length for the 330104-00-04-05-02-00?
  A: You can use up to 305 meters (1,000 feet) between the Proximitor Sensor and monitor. Longer cables reduce high-frequency signals.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628 (WhatsApp)