{"product_id":"330104-00-06-10-02-cn-bently-nevada-proximity-sensor-metric","title":"330104-00-06-10-02-CN Bently Nevada Proximity Sensor Metric","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330104-00-06-10-02-CN 3300 XL 8 mm Proximity Probe – Technical Overview \u0026amp; Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada (a brand of Baker Hughes). The \u003cstrong\u003e330104-00-06-10-02-CN\u003c\/strong\u003e ensures precision vibration and position monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS) withstands harsh industrial environments. The probe case uses AISI 303 or 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 2 mm (80 mils). The linear zone starts from 0.25 mm (10 mils) and extends to 2.3 mm (10 to 90 mils). Output spans approximately –1 to –17 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Radial Vibration Gap:\u003c\/strong\u003e Set the gap to –9 Vdc. This equals roughly 1.27 mm (50 mils) from the target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance (1.0m length):\u003c\/strong\u003e 7.59 ± 0.50 Ω (center conductor to outer conductor). The total length option for this model is 1.0 meter (3.3 feet).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications (Mechanical \u0026amp; Electrical)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e \u003cstrong\u003e330104-00-06-10-02-CN\u003c\/strong\u003e. Unthreaded length: 00 mm. Overall case length: 60 mm. Connector type: Miniature coaxial ClickLoc with standard cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread \u0026amp; Engagement:\u003c\/strong\u003e M10x1 probe case thread. Maximum thread engagement length equals 15 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring Guidelines:\u003c\/strong\u003e Use 0.2 to 1.5 mm² (16 to 24 AWG). We recommend 3-conductor shielded triad cable with tinned wires. Maximum extension cable length between Proximitor Sensor and monitor: 305 meters (1,000 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Weight:\u003c\/strong\u003e 323 g per meter (11.4 oz per meter). The compact design simplifies installation in tight spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental \u0026amp; Temperature Ratings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Probe Temperature Range (Operating\/Storage):\u003c\/strong\u003e -52°C to +177°C (-62°F to +350°F). Do not expose the probe below –34˚C (-30˚F) to avoid pressure seal failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Temperature Range Probe:\u003c\/strong\u003e Tip handles -52°C to +218°C (-62°F to +425°F); cable and connector withstand -51°C to +260°C (-60°F to +500°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity Performance:\u003c\/strong\u003e Less than 3% change in Average Scale Factor (ASF) after 56 days at 93% humidity (IEC 68 2 3).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Sealing Design:\u003c\/strong\u003e The 3300 XL 8 mm probe seals differential pressure using a Viton® O-ring. The factory does not pressure test each unit before shipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eHazardous Area Approvals (Probe Only)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsically Safe (ia):\u003c\/strong\u003e Suitable for Class I, Zone 0 AEx\/Ex ia IIC T5...T1 Ga; also Class I, II, III for Groups A through G when used with zener barriers or galvanic isolators per drawing 141092.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-incendive \/ nA, ec:\u003c\/strong\u003e Approved for Class I, Zone 2 AEx\/Ex nA IIC T5…T1 Gc and Class I, Division 2 Groups A, B, C, D per drawing 140979.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Schedule for EPL Ga\/Gc:\u003c\/strong\u003e T1 (-55°C to +232°C), T2 (-55°C to +177°C), T3 (-55°C to +120°C), T4 (-55°C to +80°C), T5 (-55°C to +40°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Schedule for EPL Dc:\u003c\/strong\u003e T280°C @ Ta (-55°C to +232°C), T225°C (-55°C to +177°C), T170°C (-55°C to +120°C), T130°C (-55°C to +80°C), T105°C (-55°C to +100°C), T90°C (-55°C to +40°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation \u0026amp; Wiring Guidance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the \u003cstrong\u003e330104-00-06-10-02-CN\u003c\/strong\u003e probe with the M10x1 thread. Ensure the thread engagement does not exceed 15 mm.\u003c\/li\u003e\n\u003cli\u003eUse the recommended -9 Vdc gap for radial vibration measurements. Always verify the target material and surface condition before final setup.\u003c\/li\u003e\n\u003cli\u003eFor field wiring, keep total cable length within 305 meters (1,000 feet) to prevent high-frequency signal rolloff. Refer to frequency response graphs for specific attenuation.\u003c\/li\u003e\n\u003cli\u003eDo not expose the probe to temperatures below –34˚C (-30˚F) during operation. This action may damage the Viton® pressure seal prematurely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the \u003cstrong\u003e330104-00-06-10-02-CN\u003c\/strong\u003e a genuine new probe?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we supply only brand new original Bently Nevada probes. We never sell counterfeit or used units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the linear range of the 3300 XL 8 mm probe?\u003c\/strong\u003e\u003cbr\u003eA: The linear range equals 2 mm (80 mils), starting from 0.25 mm to 2.3 mm (10 to 90 mils) from the target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe with a 5-meter extension cable?\u003c\/strong\u003e\u003cbr\u003eA: Yes, but the total distance between Proximitor Sensor and monitor must not exceed 305 meters (1,000 feet). Longer cables reduce high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How do I set the recommended gap for radial vibration?\u003c\/strong\u003e\u003cbr\u003eA: Adjust the probe position until the output reads –9 Vdc. This usually corresponds to 1.27 mm (50 mils) gap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What happens if I operate the probe below -34°C (-30°F)?\u003c\/strong\u003e\u003cbr\u003eA: The pressure seal may fail prematurely. Keep the probe within the specified temperature range for reliable sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you test the pressure seal before shipping?\u003c\/strong\u003e\u003cbr\u003eA: Bently Nevada does not pressure test each probe. Contact their custom design department if your application requires a seal test.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the nominal DC resistance for the 1.0m version?\u003c\/strong\u003e\u003cbr\u003eA: The resistance from center to outer conductor measures 7.59 ± 0.50 Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How long until you ship the order?\u003c\/strong\u003e\u003cbr\u003eA: We dispatch all orders within 5 business days. You will receive tracking via FedEx, UPS, or DHL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I return the probe if I change my mind?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we accept returns within 30 days. The item must stay unused and in original condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does the package include any certificate or 12-month warranty?\u003c\/strong\u003e\u003cbr\u003eA: No, the box contains the probe and basic documentation only. Warranty terms appear separately on our policy page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e© 2026 NexAuto Technology Limited. All rights reserved.\u003cbr\u003eOriginal Source: \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.nex-auto.com\/\" target=\"_blank\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003cbr\u003eContact: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e | Phone: \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/wa.me\/8615392429628\" target=\"_blank\"\u003e+86 153 9242 9628\u003c\/a\u003e (click to chat via WhatsApp)\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47859456213250,"sku":"330104-00-06-10-02-CN","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/330104-00-06-10-02-CN.jpg?v=1779763135","url":"https:\/\/www.nex-auto.com\/products\/330104-00-06-10-02-cn-bently-nevada-proximity-sensor-metric","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}