330141-08-50-11-00 New Armored Probes | Bently Nevada

Bently Nevada 330141-08-50-11-00: FluidSeal™ 8mm Vibration Probe

Dual-Protection Design

FluidLoc™ Cable: Specialized construction prevents oil wicking with 500psi pressure resistance
Armored 8mm Body: 30% thicker encapsulation than standard probes
ClickLoc Protector: Reinforced connector housing with IP67 rating
CableLoc Strain Relief: Maintains 330N (75 lbf) pull strength with fluid-sealed design
TipLoc Fusion: Permanent bond between PPS tip and stainless steel

Precision Performance Metrics

• DC Resistance: 8.73Ω ±0.50Ω at 25°C
• Scale Factor: 7.87 V/mm (200 mV/mil) ±5%
• Linearity: ±0.025mm deviation over 2.03mm range
• Response Time: <2ms signal transmission
• Humidity Stability: <3% ASF change in 93% RH for 56 days

Extreme Environment Protection

Temperature Resilience:
- Probe Tip: -52°C to +218°C (-62°F to +425°F)
- Cable Assembly: -51°C to +260°C (-60°F to +500°F)
Pressure Sealing: Viton® O-ring + FluidLoc™ dual-barrier system
Cold Warning: Avoid sustained exposure below -34°C (-30°F)

Part Number Configuration

330141-08-50-11-00 Identification:
• 08: 20.3mm (0.8-inch) stainless steel case
• 50: 5.0-meter cable (requires 5m Proximitor)
• 11: ClickLoc connector with protector + FluidLoc™ cable
• 00: No agency certifications

Material & Reliability Specifications

• Probe Tip: Molded PPS plastic with 8mm encapsulation
• Probe Body: AISI 304 stainless steel
• Cable: Fluid-blocking construction with 50,000-hour MTBF
• Seal: Dual-layer (Viton® O-ring + FluidLoc™ core)
• Weight: 323g/m (11.4 oz/ft) balanced design