{"product_id":"330192-00-08-10-05-bently-nevada-1m-hazardous-area-probe","title":"330192-00-08-10-05 Bently Nevada 1m Hazardous Area Probe","description":"\u003ch2\u003e\n\u003cstrong\u003eBently Nevada 330192-00-08-10-05\u003c\/strong\u003e Hazardous Location ETR Probe\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cspan style=\"color: #cc0000;\"\u003e\u003cstrong\u003eManufacturer \u0026amp; Model:\u003c\/strong\u003e Bently Nevada \u003cstrong\u003e330192-00-08-10-05\u003c\/strong\u003e ETR probe\u003c\/span\u003e for 3300 XL series.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 8 mm Eddy Current Transducer with stainless steel armor.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3\/8-24 UNF. Case length: 0.8 inch. Cable: 1.0 meter.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e 05 = CSA, ATEX, IECEx multiple approvals.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eGlobal Hazardous Location Certifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCSA:\u003c\/strong\u003e Certified for North American hazardous locations.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eATEX:\u003c\/strong\u003e Approved for European explosive atmospheres.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIECEx:\u003c\/strong\u003e International certification for worldwide use.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Oil refineries, chemical plants, gas pipelines, offshore platforms.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Single probe works across multiple regulatory regions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRPROBE at 1.0 meter:\u003c\/strong\u003e 7.59 ± 0.50 Ohms.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e -17.5 to -26 Vdc, nominal -24 Vdc.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil). Linear range: 2 mm.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -52 to 177 degrees Celsius.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHumidity tolerance:\u003c\/strong\u003e 93% RH, less than 3% ASF change.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePhysical Details\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e 0.8 inch (20.3 mm) - ultra short design.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 1.0 meter (3.3 feet).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUnthreaded section:\u003c\/strong\u003e Zero - threads start at shoulder.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaximum wall thickness:\u003c\/strong\u003e 0.2 inches (5 mm).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCase material:\u003c\/strong\u003e AISI 303\/304 SST. Tip material: PPS.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eArmor type:\u003c\/strong\u003e Stainless steel over full cable length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTemperature and Seal Information\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStandard operating:\u003c\/strong\u003e -52 to 177 degrees Celsius.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtended tip:\u003c\/strong\u003e Up to 218 degrees Celsius available.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePressure seal warning:\u003c\/strong\u003e Below -34 degrees Celsius may cause seal failure.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSeal material:\u003c\/strong\u003e Viton O-ring between tip and case.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFactory test:\u003c\/strong\u003e Not performed before shipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSystem Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProximitor:\u003c\/strong\u003e 3300 XL 8mm (330180-90-00).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtension cables:\u003c\/strong\u003e 3300 XL series only.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTarget material:\u003c\/strong\u003e Calibrated for AISI 4140 steel.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMonitoring systems:\u003c\/strong\u003e 3500 Series, 1900 Series, 2300 Series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003eProbe assembly with 1.0 meter armored cable.\u003c\/li\u003e\n    \u003cli\u003e3\/8-24 UNF lock nut and calibration certificate.\u003c\/li\u003e\n    \u003cli\u003eInstallation instructions and connector cap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eShipping Information\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 kg (0.66 lb). Packaging: Cardboard tube.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCarriers:\u003c\/strong\u003e FedEx, UPS, DHL (2 to 5 business days).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQ: What approvals does option 05 include?\u003c\/strong\u003e\u003cbr\u003e\n    A: Option 05 includes CSA for North America, ATEX for Europe, and IECEx for international hazardous locations. This probe is certified for global use in explosive atmospheres.\u003c\/li\u003e\n    \n    \u003cli\u003e\n\u003cstrong\u003eQ: What is the maximum wall thickness for this 0.8 inch probe?\u003c\/strong\u003e\u003cbr\u003e\n    A: Safe maximum is 0.2 inches (5 mm). Formula: 0.8 inch case minus 0.5 inch minimum thread engagement minus 0.06 inch gap equals 0.24 inch maximum with no safety margin.\u003c\/li\u003e\n    \n    \u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe below -34 degrees Celsius?\u003c\/strong\u003e\u003cbr\u003e\n    A: The probe operates to -52 degrees Celsius, but the Viton pressure seal may fail below -34 degrees Celsius. For sustained cold operation, contact Bently about special sealing materials.\u003c\/li\u003e\n    \n    \u003cli\u003e\n\u003cstrong\u003eQ: Can I add extension cable to this 1.0 meter probe?\u003c\/strong\u003e\u003cbr\u003e\n    A: Yes. Total system length (probe cable plus extension) must match your proximitor calibration. Example: 1.0 meter probe plus 4.0 meter extension equals 5.0 meter system.\u003c\/li\u003e\n    \n    \u003cli\u003e\n\u003cstrong\u003eQ: What is the difference between approval option 00 and 05?\u003c\/strong\u003e\u003cbr\u003e\n    A: Option 00 has no hazardous location certifications. Option 05 includes CSA, ATEX, and IECEx for use in explosive atmospheres. Use option 05 for refineries, chemical plants, and gas handling facilities.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47635191562498,"sku":"330192-00-08-10-05","price":252.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/330192-00-08-10-05.jpg?v=1775705513","url":"https:\/\/www.nex-auto.com\/products\/330192-00-08-10-05-bently-nevada-1m-hazardous-area-probe","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}