{"product_id":"330702-00-30-10-11-05-bently-nevada-11mm-armored-probe","title":"330702-00-30-10-11-05 Bently Nevada 11mm Armored Probe","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330702-00-30-10-11-05 3300 XL 11 mm Proximity Probe\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Technical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer \u0026amp; Brand:\u003c\/strong\u003e \u003cstrong\u003eBently Nevada\u003c\/strong\u003e, part of the \u003cstrong\u003e3300 XL\u003c\/strong\u003e series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Number:\u003c\/strong\u003e \u003cstrong\u003e330702-00-30-10-11-05\u003c\/strong\u003e, an 11 mm proximity probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Length \u0026amp; Thread:\u003c\/strong\u003e The probe has a 3.0-inch overall case length with a 1\/2-20 UNF thread. The maximum thread engagement is 0.750 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable \u0026amp; Connector:\u003c\/strong\u003e This model includes a 1.0-meter (3.3 feet) total length. It features a miniature coaxial ClickLoc connector and a FluidLoc cable, which resists oil and moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e It holds multiple approvals (Option 05) for use in hazardous areas, with temperature classifications from T1 to T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Resistance:\u003c\/strong\u003e The probe operates reliably from -52°C to +177°C. The case uses AISI 304 stainless steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eDetailed Electrical \u0026amp; Material Properties\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e The tip is made from Polyphenylene sulfide (PPS), providing excellent chemical resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e The cable is a 75 Ω triaxial type with FEP insulation, and we make it with a FluidLoc design for harsh environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e The resistance between the center and outer conductors is 5.9 ± 0.5 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Seal:\u003c\/strong\u003e A Viton O-ring seals the probe. The maximum rated pressure for the seal is 34 Bar (500 psi).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMechanical \u0026amp; Installation Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Torque:\u003c\/strong\u003e We recommend applying 15.2 N•m (133 in•lb) of torque to the probe case. The maximum torque allowed is 45.2 N•m (400 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Torque:\u003c\/strong\u003e Tighten the connector finger-tight. The maximum torque for the connector is 0.565 N•m (5 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e The probe cable requires a minimum bend radius of 25.4 mm (1.0 in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This probe is specifically designed to work with the one-meter Proximitor Sensor system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation \u0026amp; Usage Guidelines\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Procedure:\u003c\/strong\u003e First, verify the probe's resistance and insulation. Then, install the probe using the correct torque values and set the gap voltage to the midpoint of its linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Voltage Setup:\u003c\/strong\u003e For a standard 3300 XL system, set the gap voltage to approximately -12 V DC to provide equal headroom for shaft motion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing:\u003c\/strong\u003e Route the extension cable in a separate conduit to avoid interference. Ground the shield only at the proximitor end to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Warning:\u003c\/strong\u003e Exposing the probe to temperatures below -34°C may cause premature failure of the pressure seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003cstrong\u003eBently Nevada 330702-00-30-10-11-05\u003c\/strong\u003e 3300 XL 11 mm Proximity Probe with FluidLoc cable.\u003c\/li\u003e\n\u003cli\u003eStandard packaging to ensure product safety during shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping \u0026amp; Logistics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe ship all orders using trusted carriers, including FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003eWe process and dispatch orders within 5 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion: Is this 330702-00-30-10-11-05 probe a new, original product?\u003c\/strong\u003e\u003cbr\u003eYes, we supply 100% new and original \u003cstrong\u003eBently Nevada\u003c\/strong\u003e probes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion: What is the operating temperature of this 3300 XL series probe?\u003c\/strong\u003e\u003cbr\u003eThe probe operates within a temperature range of -52°C to +177°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion: What is the recommended torque for the probe case?\u003c\/strong\u003e\u003cbr\u003eThe recommended torque is 15.2 N•m (133 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion: What is the difference between the FluidLoc cable and a standard cable?\u003c\/strong\u003e\u003cbr\u003eThe FluidLoc cable prevents oil and other liquids from leaking out of the machine through the cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion: What is your return policy?\u003c\/strong\u003e\u003cbr\u003eWe support a 30-day return policy for all our products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e© 2026 NexAuto Technology Limited. All rights reserved.\u003cbr\u003eOriginal Source: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003cbr\u003eContact: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/wa.me\/8615392429628\"\u003e+86 153 9242 9628\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":48096610877698,"sku":"330702-00-30-10-11-05","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/330702-00-30-10-11-05.jpg?v=1783477412","url":"https:\/\/www.nex-auto.com\/products\/330702-00-30-10-11-05-bently-nevada-11mm-armored-probe","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}