{"product_id":"330709-000-070-50-12-00-bently-nevada-11mm-probe","title":"330709-000-070-50-12-00 Bently Nevada 11mm Probe","description":"\u003ch2\u003e\u003cstrong\u003e330709-000-070-50-12-00 – 3300 XL 11 mm Proximity Probe by Bently Nevada\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #0055cc;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada (Made in U.S.A.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #0055cc;\"\u003e\u003cstrong\u003eProduct No.:\u003c\/strong\u003e 330709-000-070-50-12-00 – 3300 XL 11 mm Probe, M16 x 1.5 thread, without armor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #0055cc;\"\u003e\u003cstrong\u003eUnthreaded Length Option:\u003c\/strong\u003e 000 = 0 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #0055cc;\"\u003e\u003cstrong\u003eOverall Case Length Option:\u003c\/strong\u003e 070 = 70 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #0055cc;\"\u003e\u003cstrong\u003eTotal Length Option:\u003c\/strong\u003e 50 = 5.0 meters (16.4 feet). Use this probe only with the five meter Proximitor Sensor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #0055cc;\"\u003e\u003cstrong\u003eConnector and Cable Option:\u003c\/strong\u003e 12 = Miniature coaxial ClickLoc connector, FluidLoc cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #0055cc;\"\u003e\u003cstrong\u003eAgency Approval Option:\u003c\/strong\u003e 00 = Not required\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCore Technical Specifications (System +18°C to +27°C, -24 Vdc supply, 10 kΩ load, AISI 4140 steel target)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eProbe DC Resistance (5.0 m length):\u003c\/strong\u003e 7.2 ± 0.8 ohms from center conductor to outer conductor (RPROBE).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eCross-talk Limitation - Flat Target Diameter:\u003c\/strong\u003e Recommended minimum 30.5 mm (1.2 in).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eShaft Diameter for Cross-talk Control:\u003c\/strong\u003e Recommended minimum 152 mm (6.0 in).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eProbe Cable Specification:\u003c\/strong\u003e 75 Ω triaxial, FEP insulated. Total probe lengths available: 1, 5, or 9 meters.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eConnector-to-Connector Torque:\u003c\/strong\u003e Recommended finger tight. Maximum torque 0.565 N•m (5 in•lb).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eMinimum Bend Radius (with or without SST armor):\u003c\/strong\u003e 25.4 mm (1.0 in).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eProbe Case Thread:\u003c\/strong\u003e M16 x 1.5. Maximum length of thread engagement is 24 mm.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eProbe Temperature Range (Operating \u0026amp; Storage):\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F). Exposing the probe below -34°C may cause premature pressure seal failure.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #d9381e;\"\u003e\u003cstrong\u003eProbe Case Torque (M16x1.5 case):\u003c\/strong\u003e Recommended 21.1 N•m (187 in•lb). Maximum rated 63.3 N•m (560 in•lb).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTemperature Classification (Probe Only) for Hazardous Areas\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor EPL Ga and Gc:\u003c\/strong\u003e T1: -55°C to +232°C | T2: -55°C to +177°C | T3: -55°C to +120°C | T4: -55°C to +80°C | T5: -55°C to +40°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor EPL Dc:\u003c\/strong\u003e T280°C @ Ta: -55°C to +232°C | T225°C @ Ta: -55°C to +177°C | T170°C @ Ta: -55°C to +120°C | T130°C @ Ta: -55°C to +80°C | T105°C @ Ta: -55°C to +100°C | T90°C @ Ta: -55°C to +40°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guidelines for the 3300 XL 11 mm Probe\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply the recommended probe case torque of 21.1 N·m (187 in·lb). Never exceed 63.3 N·m (560 in·lb).\u003c\/li\u003e\n\u003cli\u003eLimit thread engagement to 24 mm maximum for the M16x1.5 thread.\u003c\/li\u003e\n\u003cli\u003eKeep the cable bend radius at or above 25.4 mm (1.0 in) to avoid damage.\u003c\/li\u003e\n\u003cli\u003eTighten the connector only to finger tight. Maximum torque for connector is 0.565 N·m (5 in·lb).\u003c\/li\u003e\n\u003cli\u003eDo not expose this probe to temperatures below -34°C. This protects the internal pressure seal.\u003c\/li\u003e\n\u003cli\u003eUse this 5-meter probe exclusively with a five meter Proximitor Sensor for accurate readings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat's Inside the Box (Packaging List)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne Bently Nevada 330709-000-070-50-12-00 probe (11 mm, M16x1.5 thread, without armor, 70 mm case, 5.0 m FluidLoc cable).\u003c\/li\u003e\n\u003cli\u003eMiniature coaxial ClickLoc connector (pre-installed).\u003c\/li\u003e\n\u003cli\u003eBasic probe installation instruction sheet.\u003c\/li\u003e\n\u003cli\u003eNo certificate or 12-month warranty document included. The probe is a brand-new original item.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping \u0026amp; Logistics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe have the \u003cstrong\u003e330709-000-070-50-12-00\u003c\/strong\u003e in stock right now.\u003c\/li\u003e\n\u003cli\u003eWe ship within 5 business days after order confirmation.\u003c\/li\u003e\n\u003cli\u003eWe use FedEx, UPS, and DHL for reliable worldwide delivery.\u003c\/li\u003e\n\u003cli\u003eEach probe receives careful packing to prevent transit damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eReturns \u0026amp; Support\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe support a 30-day return policy for this product.\u003c\/li\u003e\n\u003cli\u003eThe probe must remain unused and in original packaging.\u003c\/li\u003e\n\u003cli\u003eContact us before returning to receive return authorization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the Bently Nevada 330709-000-070-50-12-00 a genuine new probe?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we supply only a brand-new original unit. No used or refurbished probes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this 5-meter probe with an 9-meter Proximitor Sensor?\u003c\/strong\u003e\u003cbr\u003eA: No. This probe works only with a five meter Proximitor Sensor. Mixing lengths causes calibration errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What target size does this probe need for minimum cross-talk?\u003c\/strong\u003e\u003cbr\u003eA: The recommended flat target minimum diameter is 30.5 mm (1.2 in). Shaft diameter must be at least 152 mm (6.0 in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the maximum operating temperature for this probe?\u003c\/strong\u003e\u003cbr\u003eA: The probe operates from -52°C up to +177°C (-62°F to +351°F). Avoid temperatures below -34°C to protect the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you have the 330709-000-070-50-12-00 in stock?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we keep this model in stock. We ship within 5 days via FedEx, UPS, or DHL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What torque should I apply to the probe case?\u003c\/strong\u003e\u003cbr\u003eA: Use the recommended 21.1 N·m (187 in·lb). The maximum allowed torque is 63.3 N·m (560 in·lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I return the probe if it doesn't fit my machine?\u003c\/strong\u003e\u003cbr\u003eA: You have 30 days to return the unused product in its original packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What cable type does this probe use?\u003c\/strong\u003e\u003cbr\u003eA: It uses a 75 Ω triaxial FEP insulated cable with FluidLoc protection, total length 5.0 meters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top: 20px;\"\u003e© 2026 NexAuto Technology Limited. All rights reserved.\u003cbr\u003eOriginal Source: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003cbr\u003eContact: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e | Phone: \u003ca href=\"https:\/\/wa.me\/8615392429628\"\u003e+86 153 9242 9628\u003c\/a\u003e (WhatsApp)\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47935483642114,"sku":"330709-000-070-50-12-00","price":236.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/330709-000-070-50-12-00.jpg?v=1780453345","url":"https:\/\/www.nex-auto.com\/products\/330709-000-070-50-12-00-bently-nevada-11mm-probe","provider":"NexAuto Technology Limited","version":"1.0","type":"link"}