330709-000-080-90-01-00 Bently Nevada 11mm Proximity Probes

Bently Nevada 3300 XL 11 mm Proximity Probe - Model 330709-000-080-90-01-00

Key Technical Specifications

• Manufacturer: Bently Nevada (Made in U.S.A).
• Model: 330709-000-080-90-01-00 (3300 XL 11 mm probe).
• Probe thread: M16 x 1.5 without armor.
• Unthreaded length: 0 mm (standard option).
• Overall case length: 80 mm.
• Total probe length: 9.0 meters (29.5 feet).
• Connector type: Miniature coaxial ClickLoc connector with connector protector.
• Agency approval: Not required (option 00).
• Probe DC resistance (center to outer conductor): 8.5 ± 1.1 ohms (for 9.0 m length).
• Minimum recommended target (flat surface) diameter: 30.5 mm (1.2 inches).
• Minimum recommended shaft diameter: 152 mm (6.0 inches).
• Probe tip material: Polyphenylene sulfide (PPS).
• Probe case material: AISI 304 stainless steel (SST).
• Cable specification: 75 ohm triaxial FEP insulated cable.
• Operating and storage temperature: -52°C to +177°C (-62°F to +351°F).
• Temperature caution: Exposure below -34°C (30°F) may damage the pressure seal.
• Maximum thread engagement length: 24 mm (M16x1.5 thread).
• Recommended probe case torque (M16x1.5): 21.1 N•m (187 in•lb).
• Maximum rated probe case torque: 63.3 N•m (560 in•lb).
• Connector torque (finger tight): maximum 0.565 N•m (5 in•lb).
• Minimum bend radius (with or without armor): 25.4 mm (1.0 inch).

Temperature Classification (Probe Only)

• EPL Ga and Gc - T1: Ambient -55°C to +232°C.
• EPL Ga and Gc - T2: Ambient -55°C to +177°C.
• EPL Ga and Gc - T3: Ambient -55°C to +120°C.
• EPL Ga and Gc - T4: Ambient -55°C to +80°C.
• EPL Ga and Gc - T5: Ambient -55°C to +40°C.
• EPL Dc - T280°C @ Ta: Ambient -55°C to +232°C.
• EPL Dc - T225°C @ Ta: Ambient -55°C to +177°C.
• EPL Dc - T170°C @ Ta: Ambient -55°C to +120°C.
• EPL Dc - T130°C @ Ta: Ambient -55°C to +80°C.
• EPL Dc - T105°C @ Ta: Ambient -55°C to +100°C.
• EPL Dc - T90°C @ Ta: Ambient -55°C to +40°C.

Installation Guidelines

• Thread torque: Apply 21.1 N•m (187 in•lb) for the M16x1.5 probe case.
• Connector tightening: Keep it finger tight. Never exceed 0.565 N•m (5 in•lb).
• Cable bending: Do not bend the cable tighter than a 25.4 mm (1.0 in) radius.
• Thread engagement: Limit the M16x1.5 thread to 24 mm maximum length.
• Target surface: Use a flat target of at least 30.5 mm (1.2 in) diameter.
• Shaft diameter: Choose a shaft of 152 mm (6.0 in) or larger for best results.

Package Contents (Each 330709-000-080-90-01-00)

• One Bently Nevada 3300 XL 11 mm Proximity Probe (9.0 m cable length).
• Miniature coaxial ClickLoc connector with connector protector pre-attached.
• Original factory packaging with anti-static protection.
• Product manual with quick start guide.

Frequently Asked Questions (FAQ)

• Q: Is this probe brand new and original?
  A: Yes. We supply only a brand new original Bently Nevada 330709-000-080-90-01-00 probe.
• Q: Do you have this model in stock?
  A: Yes, we have this in stock and ready to ship.
• Q: How long does delivery take?
  A: We ship within 5 business days after order confirmation.
• Q: Which carriers do you use?
  A: We ship via FedEx, UPS, and DHL for fast global delivery.
• Q: Can I return this probe?
  A: Yes. We support returns within 30 days from delivery.
• Q: What is a connector protector?
  A: The 330709-000-080-90-01-00 includes a rubber boot that shields the ClickLoc connector from dust and moisture.
• Q: What is the minimum shaft diameter for this probe?
  A: Bently Nevada recommends a minimum shaft diameter of 152 mm (6.0 inches).
• Q: Does the probe work below -34°C?
  A: Exposure below -34°C (30°F) may cause premature pressure seal failure.
• Q: What connector does this probe use?
  A: The 330709-000-080-90-01-00 includes a miniature coaxial ClickLoc connector with protector.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628