330709-000-230-50-12-05 3300 XL 11 mm Probe Bently Nevada

Bently Nevada 330709-000-230-50-12-05: 3300 XL 11 mm Proximity Probe with Multiple Approvals

Key Technical Specifications

• Brand & Model: Bently Nevada 330709-000-230-50-12-05 (3300 XL 11 mm Probe).
• Thread & Armor: M16 x 1.5 thread, without armor. Unthreaded length option 000 = 0 mm.
• Overall Case Length: 230 mm (230 option). Total probe length 5.0 meters (16.4 feet) – designed exclusively for the five meter Proximitor Sensor.
• Connector Type: Miniature coaxial ClickLoc connector with FluidLoc cable (option 12).
• Agency Approval Option: 05 = Multiple Approvals (including international hazardous area certifications).
• Probe DC Resistance (RPROBE): Center to outer conductor measures 7.2 ± 0.8 ohms at 5.0 m length.
• Target Size (Flat Surface): Recommended minimum diameter 30.5 mm (1.2 in). Shaft diameter minimum 152 mm (6.0 in).
• Probe Tip Material: Polyphenylene sulfide (PPS). Probe case uses AISI 304 stainless steel (SST).
• Cable Specification: 75 Ω triaxial, FEP insulated cable available in 1, 5, or 9 m total lengths.
• Probe Case Torque (M16x1.5): Recommended 21.1 N•m (187 in•lb). Maximum rated torque 63.3 N•m (560 in•lb).
• Connector-to-Connector Torque: Finger tight recommended; maximum 0.565 N•m (5 in•lb).
• Minimum Bend Radius: 25.4 mm (1.0 in) with or without SST armor.
• Maximum Thread Engagement Length: 24 mm for M16x1.5 thread.
• Temperature Range (Operating & Storage): -52°C to +177°C (-62°F to +351°F). Exposing probe below -34°C (30°F) may cause premature pressure seal failure.

Frequently Asked Questions (FAQ)

• Q: Is the 330709-000-230-50-12-05 a genuine Bently Nevada part?
  A: Yes, we supply 100% genuine Bently Nevada 3300 XL series probes. All units are new original stock.
• Q: What does "Agency Approval Option 05" mean for this probe?
  A: Option 05 means multiple approvals (e.g., ATEX, IECEx, CSA) for use in hazardous areas. The 330709-000-230-50-12-05 meets global safety standards.
• Q: Can I use this 5.0 meter probe with a 9 m Proximitor Sensor?
  A: No, the 330709-000-230-50-12-05 works only with a five meter Proximitor Sensor. Using any other length will cause measurement errors.
• Q: What is the typical linear range of this probe?
  A: The 3300 XL 11 mm probe offers a standard linear range from 0.25 mm to 2.3 mm (10 to 90 mils) with 7.87 V/mm sensitivity.
• Q: Does the probe resist high vibration or chemical exposure?
  A: Yes, the AISI 304 stainless steel case and FEP cable insulation provide strong chemical and vibration resistance.
• Q: How do I avoid damaging the connector?
  A: Always finger-tighten the ClickLoc connector. Never exceed 0.565 N•m (5 in•lb) torque.
• Q: Do you have this item in stock for urgent orders?
  A: Yes, we have plenty of stock for model 330709-000-230-50-12-05. We can ship within 5 days via DHL/FedEx/UPS.
• Q: What is the minimum bend radius for installation?
  A: Do not bend the cable tighter than 25.4 mm (1.0 inch) radius to preserve internal conductors.
• Q: Can I return the probe if it does not fit my machine?
  A: Yes, you have 30 days to return the unused product. Ensure original packaging and no damage.
• Q: Which hazardous area certifications does option 05 include?
  A: Option 05 typically includes ATEX, IECEx, and CSA approvals. Contact sales@nex-auto.com for the full certificate list.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | Phone: +86 153 9242 9628 (WhatsApp)