Allen-Bradley 1715-TASIF16 Termination Assembly

Allen-Bradley 1715-TASIF16 Simplex A/I Termination Assembly

The 1715-TASIF16 is a Simplex Analog Input Termination Assembly from Allen-Bradley's 1715 I/O system. This compact module provides precise signal conditioning for 4-20mA current loop measurements in industrial applications. It features high accuracy and robust construction for reliable operation in demanding environments.

Core Technical Specifications

• Measurement Range: 4 to 20 mA DC current input
• Measurement Accuracy: ±0.1% of full scale at 25°C
• Output Signal: Conditioned 4-20mA to connected controller
• Operating Temperature: -40 to +85°C (-40 to +185°F)
• Storage Temperature: -55 to +105°C (-67 to +221°F)
• Product Weight: 85 grams (3.0 ounces)
• Housing Material: Robust aluminum construction for EMI protection
• Input Impedance: 250 Ω nominal
• Update Rate: 10 ms per channel typical
• Power Requirements: Powered via 1715 backplane (24V DC)
• Isolation Voltage: 250V RMS continuous field to logic

Signal Conditioning Performance

• Common Mode Rejection: > 120 dB at 50/60 Hz
• Normal Mode Rejection: > 60 dB at 50/60 Hz
• Linearity Error: < 0.05% of full scale
• Temperature Drift: ±0.005%/°C maximum
• Zero Offset: < ±5 μA at 25°C
• Span Offset: < ±0.05% of reading
• Noise Rejection: 10 Hz filtering standard, configurable via software
• Burnout Detection: Upscale or downscale configurable for sensor failure

Physical & Installation Specifications

• Dimensions: 45 × 115 × 75 mm (1.77 × 4.53 × 2.95 inches)
• Mounting: Direct installation on 1715 terminal base unit
• Wire Size: Recommended 18-14 AWG (0.75-2.5 mm²)
• Terminal Type: Spring clamp connectors with screw retention
• Terminal Torque: 0.5-0.6 N-m (4.4-5.3 lb-in)
• Connection Points: 4-wire connection (+, -, shield, sense)
• Ingress Protection: IP20 when installed in enclosure
• Color Identification: Standard gray with channel labeling

Easy Installation Guide

• Installation requires only basic hand tools - no special equipment needed
• Connect field wiring directly to the clearly labeled terminal blocks
• Snap the termination assembly onto the 1715 terminal base unit
• Typical installation time: 5-10 minutes per module
• Configuration is performed via controller software, not hardware settings
• Saves significant time during system setup and maintenance operations

System Compatibility

• Primary Compatibility: Allen-Bradley ControlLogix, CompactLogix systems
• Communication Protocol: CIP via 1715 communication adapter
• PLC Compatibility: Works with major brands through universal 4-20mA interface
• Software Configuration: Rockwell Studio 5000 programming environment
• System Integration: Fits standard analog input modules in distributed I/O systems
• Upgrade Path: Ideal for modernizing legacy analog measurement systems

Industrial Applications & Problem Solving

• Noise Reduction: Eliminates signal interference in electrically noisy factory environments
• Harsh Environment Operation: Provides stable readings in extreme temperature and humidity conditions
• Chemical Plants: Prevents measurement errors in corrosive and explosive atmospheres
• Water Treatment: Ensures accurate process control for pH, flow, and level measurements
• Manufacturing: Reduces machine downtime by providing reliable sensor feedback
• Energy Management: Accurate power and energy monitoring in utility applications

Protection & Safety Features

• Overvoltage Protection: Withstands up to 50V continuous input
• Reverse Polarity Protection: Protected against incorrect wiring
• ESD Protection: ±8 kV contact discharge per IEC 61000-4-2
• Surge Protection: ±1 kV line-to-line per IEC 61000-4-5
• Certifications: UL listed, CE marked, cULus recognized
• EMC Compliance: Meets IEC 61326-1 for industrial environments

Package Contents

• One (1) Allen-Bradley 1715-TASIF16 termination assembly unit
• Secure protective packaging to prevent damage during shipping
• Installation documentation and wiring diagrams
• Standard 12-month manufacturer warranty applies

Shipping & Delivery

• Shipping Options: FedEx, UPS, or DHL express service available
• Processing Time: Orders placed before 3:00 PM EST typically ship same day
• Tracking Information: Provided for all shipments via email notification
• International Shipping: Available to most global destinations
• Lead Time: Typically 2-4 business days for standard orders

Frequently Asked Questions

• Does this module require external power? No, it receives power from the 1715 backplane system.
• Can it handle 0-20mA signals? Yes, the 4-20mA range is software configurable to 0-20mA.
• Is HART communication supported? This is a basic termination assembly; HART requires additional components.

For application engineering and system integration support for the 1715-TASIF16, contact our technical team.

Contact Information:
Email: sales@nex-auto.com
Phone/WhatsApp: +86 153 9242 9628

Partner: AutoNex Controls Limited

© 2025 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/