Bently Nevada 45358-09 Extension Cable 9m

Bently Nevada 45358-09 9 Meter Softline Extension Cable

• Manufacturer & Model: Bently Nevada 45358-09 extension cable for accelerometer interface modules.
• Product Type: 9 meter Softline cable with twisted shielded pair construction.
• Cable Length: 9 meters (29.5 feet).
• Condition: New & original in factory packaging.
• Warranty: 12 months factory warranty.
• Made in: U.S.A.

Connector Configuration

• Accelerometer end: Mates to MS 3100R-10SL-4P receptacle.
• Accelerometer connector feature: Viton insert for chemical resistance.
• Interface module end: Mates to MS 3112-8-3P connector.
• Connector protection: Rear of both connectors are potted.
• Cable protection: Convoluted Teflon tubing overall.
• Construction: Low noise twisted shielded pair.

Softline Temperature Ratings

• Cable operating range: -54°C to +204°C (-65°F to +400°F).
• Accelerometer connector: -54°C to +200°C (-65°F to +392°F).
• Interface module connector: -45°C to +93°C (-50°F to +200°F).
• Weakest link: Interface module connector limits overall system temperature.
• Application advice: Keep interface module connector in cooler area.
• Chemical resistance: Viton insert withstands oils and fuels.

Softline vs Hardline Comparison

• This is Softline (45358-09): Teflon tubing, lower temperature rating.
• Hardline alternative: Mineral insulation with stainless steel overbraid.
• Softline max temp: +204°C for cable, +200°C for accelerometer connector.
• Hardline max temp: +649°C for cable, +427°C for both connectors.
• Softline flexibility: More flexible than Hardline.
• Choose Softline for: Most industrial applications under 200°C.

Hardline Reference Specifications

• Hardline accelerometer connector: Mates to MS 3100R-10SL-4P with Viton insert.
• Hardline disconnect interface connector: Mates to MS 3106-10SL-4S.
• Hardline cable type: Mineral insulated twisted shielded pair.
• Hardline cable protection: Stainless steel overbraid.
• Hardline cable temp: -54°C to +649°C (-65°F to +1200°F).
• Hardline connectors temp: -54°C to +427°C (-65°F to +800°F).

Physical Characteristics

• Cable type: Twisted shielded pair, low noise construction.
• Outer jacket: Convoluted Teflon tubing for flexibility and protection.
• Connector potting: Seals out moisture and contaminants.
• Length: 9 meters (29.5 feet) nominal.
• Weight: Approximately 0.8 kg (1.8 lb).
• Bend radius: Follow standard Teflon cable practices.

Compatibility Information

• Compatible accelerometers: Bently Nevada accelerometers with MS 3100R-10SL-4P receptacle.
• Compatible interface modules: Modules with MS 3112-8-3P connector.
• Typical system: 330400 series accelerometer to interface module.
• Not for: Proximity probe systems (different connector types).
• Verification: Check your accelerometer and module connector types.

Installation Guidelines

• Hand-tighten connectors: Do not use tools on coupling nuts.
• Inspect pins before connection: Look for bent or damaged contacts.
• Keep connectors clean: Dirt affects signal quality.
• Secure cable: Use cable ties every 0.5 to 1 meter.
• Avoid sharp bends: Minimum radius 50mm (2 inches).
• Keep from heat sources: Respect temperature limits of each connector.

Low Noise Construction Benefit

• Twisted pair design: Cancels electromagnetic interference.
• Shielded construction: Blocks external noise pickup.
• Low noise rating: Essential for low amplitude accelerometer signals.
• Result: Clean vibration data without false spikes.
• Comparison: Standard cables may introduce electrical noise.
• Best practice: Keep cable away from power lines.

Package Contents

• Cable assembly: 45358-09 9 meter Softline extension cable.
• Connectors: Both ends pre-installed and potted.
• Documentation: Installation instruction sheet.
• Packaging: Factory sealed anti-static bag.
• Certification: Not applicable for cable only.

Shipping Information

• Shipping weight: 0.9 kg (2.0 lb) packaged.
• Packaging: Coiled in cardboard box.
• Box dimensions: 35 x 35 x 10 cm.
• FedEx: 2-3 business days worldwide.
• UPS: 2-4 business days.
• DHL: 3-5 business days.

Frequently Asked Questions

• Q: What is the difference between Softline 45358-09 and Hardline cables?
  A: Softline uses Teflon tubing and twisted pair for flexibility up to +204°C. Hardline uses mineral insulation and stainless steel overbraid for extreme heat up to +649°C. Choose Softline for standard industrial applications, Hardline for furnaces or turbines above 204°C.
• Q: Why does the interface module connector have lower temperature rating than the cable?
  A: The MS 3112-8-3P connector uses materials rated for -45°C to +93°C only. The cable itself handles higher temperatures, but the connector becomes the system limit. Install the interface module end away from heat sources to stay within +93°C.
• Q: Can I use the 45358-09 cable with any accelerometer?
  A: Only with accelerometers that have MS 3100R-10SL-4P receptacle. Check your accelerometer connector type before ordering. Bently Nevada accelerometers typically use this connector, but verify model number compatibility.
• Q: What does "potted connectors" mean and why does it matter?
  A: Potted means the rear of each connector is filled with sealing compound. This prevents moisture, oil, and dirt from entering the connector body. Potted connectors last longer in harsh industrial environments than unsealed types.
• Q: Is the 9 meter length the maximum available for Softline?
  A: Bently Nevada offers various lengths. The 45358-09 is 9 meters. Longer lengths may be available as custom orders. Longer cables increase signal attenuation, so verify signal strength for your application before exceeding 9 meters.