GE Fanuc IC200UDR140 VersaMax Micro 40 PLC

GE Fanuc VersaMax Micro 40 PLC - IC200UDR140 - 100-240V AC

GE Fanuc brings compact control. The IC200UDR140 VersaMax Micro 40 PLC runs on 100V AC to 240V AC power. This unit handles 24 DC inputs and 16 relay outputs. Use it for machine control, conveyors, and small automation cells.

Core Specs

• Brand: GE Fanuc
• Model: IC200UDR140
• Series: VersaMax Micro
• Type: Micro PLC (40 I/O)
• Power Supply: 100-240V AC (120/240V nominal)

Inputs & Outputs

• Input Type: 24 V DC
• Number of Inputs: 24
• Output Type: Relay
• Number of Outputs: 16
• Total Built-in I/O: 40 points

Power Details

• Input Voltage Range: 100V to 240V AC
• Nominal Voltage: 120V / 240V AC
• Frequency: 50/60 Hz
• Inrush Current: 20A max at 120V AC
• Power Consumption: 30 VA typical

Memory & Registers

• Logic Memory: 24K words (user program)
• Registers: 32K words
• Discrete Memory: 2048 bits input, 2048 bits output
• Timer/Counter Range: 0 to 32767

Expansion Capability

• Analog Expansion Units: Up to 4
• Max Analog Inputs: 16
• Max Analog Outputs: 8
• Maximum Physical I/O: 152 points total

Communication

• Serial Port: RS-232 (programming)
• Baud Rate: 9600 to 115200 bps
• Protocol: SNP, RTU, Modbus slave
• Programming Connector: 15-pin D-sub

Speed & Performance

• Scan Time: 0.8 ms per 1K logic
• Boolean Execution: 0.5 µs per contact
• Timer Resolution: 1 ms to 32767 ms

Output Ratings (Relay)

• Contact Rating: 2A at 120/240V AC
• Max Load (Resistive): 2A per point
• Max Load (Inductive): 0.5A at 120V AC
• Life (Electrical): 100,000 operations at rated load
• Life (Mechanical): 10 million operations

Input Ratings (DC)

• Input Voltage Range: 10 to 30 V DC
• Nominal Voltage: 24 V DC
• Input Current: 7 mA at 24V DC
• On-State Voltage: > 15V DC
• Off-State Voltage: < 5V DC
• Response Time: 2 ms typical

Environment

• Operating Temp: 0°C to +60°C
• Storage Temp: -40°C to +85°C
• Humidity: 5% to 95% non-condensing
• Shock: 15G (11ms half-sine)
• Vibration: 0.015" peak-to-peak (5-57Hz)

Physical

• Size (H x W x D): 90 x 140 x 75 mm
• Weight: 0.55 kg
• Mounting: DIN rail or panel
• Housing: Plastic, UL94 V-0

Status LEDs

• PWR (Green): Power OK
• RUN (Green): Program running
• FAULT (Red): CPU error
• I/O LEDs: Per point status

Portable Memory

• Memory Module: Supported (optional)
• Function: Program backup and transfer
• Compatible Part: IC200ACC302

Certifications

• UL Listed: Yes
• CE Mark: Yes
• Class 1 Div 2: Yes (hazardous locations)

Box Contains

• IC200UDR140 VersaMax Micro 40 PLC
• Removable terminal blocks
• DIN rail mounting clip

Shipping

• Weight: ~0.7 kg packed
• Carriers: FedEx, UPS, DHL

FAQ

• Can this PLC run on 24V DC?
  No. IC200UDR140 needs 100-240V AC. Use a separate 24V DC supply for inputs.
• What software programs this?
  GE Proficy Machine Edition. VersaPro also works for older firmware.
• How many analog modules can I add?
  Up to 4 expansion modules. Max 16 analog inputs total.
• What is the difference between UDR and UDD?
  UDR has relay outputs. UDD has DC outputs. Choose relay for AC loads.
• Does this support Modbus?
  Yes. The RS-232 port runs Modbus RTU slave protocol.

Selection Guide

• Need relay outputs for AC loads? Choose IC200UDR140. Relays switch up to 240V AC directly.
• Need more than 40 I/O? Add expansion modules. Maximum system size is 152 I/O.
• Field replacement tip: Remove terminal blocks first. Then slide DIN rail latch to release.
• Power wiring warning: Use a 4A external breaker. AC power lines must be separate from DC signal wires.