IC695PSD140 RX3i Power Supply GE Fanuc

IC695PSD140 - GE Fanuc RX3i Power Supply

Outputs:

• +5.1 VDC Output
• +24 VDC Relay Output (used to power circuits on Output Relay modules)
• +3.3 VDC Output

Specifications:

• Nominal Rated Voltage: 24 VDC
• Input Voltage Range: 18 to 30 VDC
• Input Power: 60 Watts maximum at full load
• Inrush Current: 4 Amps, 100 milliseconds maximum

Output Power:

• Total Output Power: 40 Watts maximum (for both outputs)
• 5.1 VDC: 30 Watts maximum
• 3.3 VDC: 30 Watts maximum

Output Voltage:

• 5.1 VDC: 5.0 VDC to 5.25 VDC (nominal 5.1 VDC)
• 3.3 VDC: 3.2 VDC to 3.465 VDC (nominal 3.3 VDC)

Output Current:

• 5.1 VDC: 0 to 6 Amps
• 3.3 VDC: 0 to 9 Amps

Additional Information:

• Isolation: None
• Ripple (all outputs): 50 mV
• Noise (all outputs): 50 mV
• Ride-through time: 10 ms (maintains valid outputs if the power source is interrupted)
• Note: If used with IC694 and IC693 modules with relay outputs, take precautions as source voltage dropouts may cause relay dropouts.

Wiring:

• Terminals: Each terminal accepts one 14 AWG to 22 AWG wire.
• Terminal Current: 6 Amps

Daisy-Chaining:

• Number of Daisy-Chained PSD140 Supplies: Up to 4

Universal Backplane:

• Number of PSD140 Supplies: Up to 4