Shaft Relative Vibration Monitor | A6110 EMERSON

Emerson A6110 Shaft Relative Vibration Monitor

Core Measurement Capabilities

• Range: 0-400 mV (min) | 0-8000 mV (max)
• Sensor Power: -26.7 V DC nominal, 20 mA nominal (35 mA max)
• Outputs: 2x ±10V front panel buffers (>100 kΩ load)

Electrical Specifications

• Frequency Response: 0.1-5 kHz (-3dB) | 0-16 kHz (±20%)
• Isolation: Galvanic separation from system voltages
• Protection: Open/short circuit proof design

Physical Configuration

• Dimensions: 160×128.4×30 mm (6.3×5.06×1.18 in)
• Weight: 320g net (0.705 lbs) | 450g gross (0.992 lbs)
• Connector: Mini DIN configuration socket (RS-232 interface)

Environmental Compliance

• Operating Temp: 0°C to +65°C (32°F to 149°F)
• Vibration: IEC 68-2-6: 0.15mm (10-55Hz) / 19.6mm/s² (55-150Hz)
• Shock: IEC 68-2-29: 98m/s² peak (16ms duration)
• Enclosure: IP00 (module) | IP21 (front panel)

Certifications & Standards

• DIN 40050 (environmental protection)
• DIN 40040-KTF (climate class)
• EURO card format DIN 41494 compliant

Reliability Assurance

1-year performance warranty | 100% factory tested under IEC environmental conditions.