GE Fanuc  - IC694MDL741 Negative‑Logic Output Module Core Specifications Channels: 16 (2 groups × 8) Voltage Range: 12–24 V DC (+20 / –15 % tolerance) Current: 0.5 A per channel, 2 A per group Isolation: 250 VAC continuous, 1500 VAC for 1 min (field↔backplane, group↔group, field↔frame) Response Time: 2 ms on/off Off‑State Leakage: ≤ 1 mA per channel Voltage Drop: ≤ 0.5 V...

GE Fanuc IC694MDL752 High-Density TTL/24VDC Output Module Key Features Voltage Modes: 5 VDC TTL or 12/24 VDC Output Channels: 32 discrete outputs Output Groups: 4 groups of 8 outputs Logic Type: Negative logic (sinking) Point-to-Point Isolation: Yes Dual Mode Operation: 4.75–5.25 VDC (TTL) or 10.2–28.8 VDC (12/24 VDC) Electrical...

IC694MDL753 Key Functional Highlights: Output Voltage Range: 10.2 – 28.8 VDC Nominal Voltage Levels: 12 VDC or 24 VDC Output Current per Channel: 0.5 Amps Total Output Current per Group: Up to 4.0 Amps Group Common Pin Current Limit: 3.0 Amps max Inrush Current...

Technical Specifications Parameter Details 🏷️ Brand GE Fanuc 🔢 Model Number IC694MDL754 🔗 Series PACSystem RX3i 🔌 Number of Channels 32 discrete output points, grouped in two sets of 16 channels ⚡ Voltage Range 10.2 - 30.0 VDC 🔋 Current Capacity per Channel 0.75...

IC694MDL930 Product Overview: Brand: GE Fanuc (formerly GE Intelligent Platforms, now Emerson Automation) Series: PACSystem RX3i Part Number: IC694MDL930 Product Type: AC/DC Relay Output Module Channels: 8 individually-isolated outputs Output Contact Form: Form A (Normally Open) Output Voltage Range: 5 to 30 VDC; 5...

IC694MDL940 Key Features Operating Range: 5–30 VDC or 5–250 VAC (47–63 Hz) Nominal Ratings: 24 VDC / 120–240 VAC Switching Capacity: 2 A per channel, 4 A per group common Response Time: ≤ 15 ms Minimum Load: 10 mA Maximum Inrush: 5 A Isolation: 250 VAC continuous / 1500 VAC for 1 min (field-to-backplane & frame ground) Additional...

GE Fanuc IC695ALG112 Key Functional Overview Module Type: Analog Input Series: RX3i PACSystem Part Number: IC695ALG112 Input Channels: 12 Single-ended Input Types: Voltage (±10V, ±5V, 0–10V, 0–5V, 1–5V) and Current (0–20mA, 4–20mA, ±20mA) Enhanced Performance Features Resolution: 16-bit ADC with configurable Floating Point or...

IC695ALG306 Core Performance Input Range: ±150 mV or ±50 mV per channel Resolution: 11.5–16 bits Update Rate: 15–120 ms (selectable) Channel Isolation: 1 500 V RMS minimum Internal Supply: 3.3 V @ 400 mA; 5 V @ 150 mA Expanded Accuracy & Stability Absolute Accuracy: ±0.1 % of reading Cold Junction Drift: <0.01 °C/°C ambient change...

IC695ALG412 Overview & Model Suffix IC695 – RX3i family ALG – Analog isolated inputs 412 – 12-channel strain/TC module Electrical & Data Specs Input Ranges: ±50 mV / ±150 mV ADC Type: Sigma‑Delta, 32‑bit IEEE float or 16‑bit integer Conversion Time: 15 ms @ 28 Hz; 120 ms @...

IC695ALG600 - GE Fanuc RX3i Universal Analog Input Module Specifications: CPU Memory Usage: 40 bytes (20 words) of input references for channel input data 40 bytes for enhanced diagnostics 4 bytes for module status reporting Power Requirements: Backplane: 400 mA maximum @ 5V, 350...

Specifications General Information: Parameter Value 🔢 Part Number IC695ALG608 📦 Module Type Analog Input 🏷️ Brand GE Fanuc Input Channels: Parameter Value 📡 Configurable Input Channels 8 single-ended or 4 differential analog inputs 🔌 Supported Signals Current and Voltage input signals Input Signal Ranges:...

PACSystem RX3i Analog Input Module IC695ALG628 Model Details Part Number: IC695ALG628 Platform: PACSystem RX3i HART Version: 5.0 Channels: 8 single‑ended or 4 differential Key Specifications Resolution: 24‑bit ADC with ±0.01 % linearity error Response Time: ≤ 4 ms per channel Input Ranges: ±10 V, 0–10 V, ±5 V, 0–5 V, 1–5 V;...

GE Fanuc IC695ALG704 Analog Output Module Model: IC695ALG704 is compatible with RX3i CPUs (version 3.0 or later) and installs in a single slot on the universal backplane. It supports both voltage and current output modes: Voltage output ranges: ±10 VDC and 0–10 VDC Current...

Technical Specifications Model: IC695ALG708 Series: PACSystem RX3i Output Range: 0 to 20mA, 4 to 20mA, ±10V, 0 to 10V Output Resolution: 15.9 bits for current (0 to 20mA), 14.9 bits for voltage (0 to 10V) Backplane Power: 375mA maximum at 3.3V External Power Supply...

🛠 Technical Specifications Product Information Parameter Specification Brand GE Fanuc (Emerson Automation) Model IC695ALG808 Series PACSystem RX3i Type Isolated Analog Output Module Channels 8 Output Voltage Range ±10V, 0 to +10V Output Current Range 0-20 mA, 4-20 mA Backplane Power Consumption 80 mA @...

GE Fanuc IC695MDL664 Smart Digital Input Module - Precision for RX3i PLC Systems Core Technical Specifications Brand & Series: GE Intelligent Platforms/GE Fanuc | RX3i PacSystem Model: IC695MDL664 (RX3i product line, catalog IC695) Rated Voltage: 24V DC (field input power) Input Capacity: 16 points,...

GE Fanuc IC697ALG230F - Base Converter Module Core Specifications Input Channels: 8 (Maximum: 120) Analog Output Resolution: 16 bits Voltage Input Range: -10 to +10 Volts Current Input Range: 4 to 20 milliamps Update Rate: 2.4 ms to 2.8 ms Current Accuracy: ± 0.05%...

Essential Electrical and Performance Details: Model Number: IC697ALG441 Series: 90-70 Number of Inputs: 16 differential analog inputs Voltage Input Range: -10 to +10 Volts DC Conversion Rate: 2 milliseconds per channel for fast data acquisition Calibration Accuracy: Factory calibrated at 10 V ± 2...

GE Fanuc Remote I/O Scanner Module Model: IC697BEM733 Product Features Compact Slot Design: Occupies a single slot in the IC697 remote rack, making it efficient for modular setups. Multi-LED Indicator System: Equipped with diagnostic LEDs for Module OK, I/O Enabled, and Bus B Active...

Key Functional Details Model Number: IC697BEM735 Product Series: GE Fanuc Series 90-70 Application: Designed for the IC66 bus system Rated Operating Voltage: 5.0 VDC Backplane Power Consumption: 1.3 Amps at 5.0 VDC (6.5 Watts) Maximum Communication Distance: 7,500 feet (2,275 meters) I/O Support: Up...