-
Vendor: More Brands
MTL - MTL5040 Transmitter Power Supply
MTL5040 Dual-Channel 4-20mA Isolator & Transmitter Power Supply Core Function: Powers hazardous-area transmitters (Channel 1) and replicates signals to safe-area (Channel 2) with full electrical isolation. Technical Specifications Channel 1 (Transmitter Power): • Output: 16.5V @20mA to transmitter • Input Range: 0-24mA (4-20mA nominal)... -
Vendor: More Brands
MTL5049 MTL Instruments - Isolating Driver
MTL5049 Dual-Channel 4-20mA Isolator for Hazardous Areas Core Specifications Channels: 2 isolated 4-20mA Input Range: 0-24mA (4-20mA nominal) Output Load: ≤550Ω (11V@20mA) Accuracy: ±20μA @20°C Response Time: 250μs to 90% value Isolation: 28V, 300Ω, 93mA (Um=250V) Wiring Configuration Terminal Function 1, 2 Channel 1... -
Vendor: More Brands
Hazardous Area Control Module | MTL MTL5024
MTL5024 Hazardous Area Control Module with Phase Reversal Key Features • Volt-free or logic signal control (switch/transistor/PLC) • Phase reversal switch for input signal flexibility • Dual LED indicators (green power/yellow status) Technical Specifications Output: 12.85-25V DC | 45mA max Input: 20-35V DC |... -
Vendor: More Brands
MTL5022 | Eaton MTL Solenoid/Alarm Driver
MTL5022 Hazardous Area Control Interface Core Technical Specifications Output voltage range: 12.9V to 24V Max output current: 60mA Input voltage: 20V–35V DC Load resistance: Up to 133Ω Power dissipation: 1.5W (24V), 2.1W (35V) Isolation: 250V rms/dc (Um) Response time: <100ms Industrial Uses Safe control... -
Vendor: More Brands
MTL Instruments | MTL5053 Fieldbus Isolator
MTL5053 Fieldbus Isolator for Hazardous Areas Extends 31.25kbit/s H1 fieldbus networks into Zone 0 with integrated power supply Key Features Certification Zone 0, IIC, T4-T6 certified Power Supply 18.4V ±2% (80mA max) Communication 31.25kbit/s H1 fieldbus Installation DIN rail with 10mm spacing Technical Specifications... -
Vendor: More Brands
Hazardous Area Communication Interface | MTL5051
MTL5051 Hazardous Area Communication Interface Bi-directional RS232/RS422 to Intrinsically Safe Devices Core Capabilities ✔ Dual-mode operation: Display & Data Communication ✔ Supports MTL640 Series displays & other IS devices ✔ Configurable 5V/12V field power supply ✔ Three communication protocols in one unit Key Specifications... -
Vendor: More Brands
MTL Instruments | MTL5018AC Relay Interface
MTL5018AC Dual-Channel Relay Interface (AC Powered) Key Features AC-Powered - 85-265V AC operation Two 2A relays with changeover contacts Independent phase reversal per channel Visual line fault diagnostics Technical Specifications Input Characteristics Type: NAMUR/DIN 19234 compliant Voltage: 7-9V via 1kΩ ±10% ON Threshold: >2.1mA... -
Vendor: More Brands
Single-Channel Hazardous Area Interface MTL5012
MTL5012 Single-Channel Hazardous Area Interface Core Functionality Solid-state safe-area output controlled from Zone 0 switches/proximity detectors. Features phase reversal and line fault detection. Technical Specifications Input Characteristics Type: NAMUR/DIN 19234 compliant Voltage: 7-9V via 1kΩ ON Threshold: >2.1mA or <2kΩ OFF Threshold: <1.2mA or... -
Vendor: More Brands
Dual-Channel Relay Interface | MTL5018 MTL
MTL5018 Dual-Channel Relay Interface for Hazardous Areas Key Advantages Two isolated relay outputs controlled from Zone 0 Independent phase reversal per channel Visual line fault diagnostics NAMUR proximity detector compatible Technical Specifications Input Characteristics• Voltage: 7-9V via 1kΩ• ON Threshold: >2.1mA or <2kΩ• OFF... -
Vendor: More Brands
Hazardous Area Interface MTL5015 MTL
MTL5015 Dual-Channel Hazardous Area Interface Dual-Control Safety Solution Two independent channels for controlling safe-area logic from Zone 0 switches/proximity detectors. Features phase reversal and line fault detection per channel. Critical Specifications Input Characteristics:• NAMUR/DIN 19234 compliant• Sensor Voltage: 7-9V via 1kΩ• Activation Thresholds:- ON:... -
Vendor: More Brands
RTD Interface Module | MTL MTL5082
MTL5082 Hazardous Area RTD Interface Module Core Functionality Isolates and transmits RTD signals from Zone 0 areas with 2/3/4-wire flexibility. Designed for Pt100 sensors with open-circuit protection. Technical Specifications RTD Compatibility:• Wire Configurations: 2/3/4-wire (switch-selectable)• Resistance Range: 10Ω to 400Ω• Excitation Current: 200μA nominal•... -
Vendor: More Brands
MTL5524 - Hazardous Area On/Off Control Module
MTL5524 Hazardous Area On/Off Control Module Key Features Safe control of Zone 0 devices using simple safe-area signals. Drives solenoids, alarms, and low-power devices with phase reversal option. Technical Specifications Output Voltage: 13.6V (min) to 24V (max)Current Limit: 48mA minimumOff-State Leakage: <4VResponse Time: <100msInput... -
Vendor: More Brands
Power Supply MTL5553 | MTL Instruments
MTL5553 Hazardous Area Fieldbus Power Supply Key Features Safe power for fieldbus networks in explosive zones. Extends 31.25kbit/s H1 networks with built-in terminator option. Technical Specifications Output Voltage: 18.4V ±2%Current Capacity: 80mA maxDC Impedance: 105Ω ±3%Input Range: 20-35V DCPower Consumption: 135mA at 24VIsolation: 250V... -
Vendor: More Brands
MTL5017 Proximity Detector - MTL Instruments
Product Introduction The MTL5017 barrier safely controls two hazardous-area devices from safe-area relays. This intelligent interface connects Zone 0/Division 1 sensors to control systems with advanced diagnostics. Technical Specifications Dual-channel design for simultaneous operation Accepts NAMUR/DIN 19234 proximity detectors Works with switches in Zone... -
Vendor: More Brands
Eaton MTL | MTL3042 Loop-Powered Isolator
Precision Current Isolation for Hazardous Areas The MTL3042 serves as a reliable DC current transformer, maintaining identical 4-20mA signals between safe and hazardous areas. Designed primarily for I/P converters and position actuators, this compact solution offers simple installation with safe-area power. Core Advantages Bi-directional... -
Vendor: More Brands
MTL | Repeater Power Supply | MTL3041
Product Introduction The MTL3041 provides a fully-floating DC supply for 2-wire 4-20mA transmitters in hazardous areas. Its 17.5V output (at 20mA) powers most transmitter loops while maintaining complete electrical isolation. This barrier accurately replicates current in a separate floating circuit for safe-area loads. The... -
Vendor: More Brands
MTL Instruments | Digital Isolator | MTL3052
Product Introduction The MTL3052 is an intrinsically safe (IS) interface barrier designed for digital signal transmission in hazardous areas. It operates at higher frequencies than the MTL3042, making it ideal for MTL800 Series multiplexer systems. The unit ensures safe data highway and transmitter communication... -
Vendor: More Brands
MTL3046B Repeater Power Supply | MTL
Product Introduction The MTL3046B barrier safely interfaces smart transmitters in hazardous areas with control systems. This advanced unit supports both 4-20mA analog signals and digital communications simultaneously. It replaces the MTL3046 while offering enhanced compatibility with most modern smart transmitters. Engineers can calibrate and... -
Vendor: More Brands
MTL4516 Hazardous-Area Switch Interface Eaton MTL
MTL4516 Dual-Channel Hazardous-Area Switch Interface Key Features Controls two safe-area loads from hazardous-area switches or proximity sensors. Built-in Line Fault Detection (LFD) with LED alarms. Supports NAMUR sensors and contact inputs. Technical Specifications Channels: 2 (independent) Input Voltage: 7-9V DC (1kΩ ±10%) Trigger Threshold:... -
Vendor: More Brands
MTL Instruments | Temperature Converter MTL4575
MTL4575 Hazardous Area Temperature Transmitter Key Features Converts temperature signals to 4-20mA for safe area use. Works with all major thermocouples and RTDs. PC-configurable with alarm output. Technical Specifications Input Range: -75mV to +75mV or 0-1000Ω Output Signal: 4-20mA into 600Ω max Accuracy: ±0.05%...
Available 24/7 at
+86 15392429628
Vendor: Bently Nevada
PROXPAC XL Proximity Transducer 330880-16-40-037-03-02
Bently Nevada PROXPAC XL Proximity Transducer Manufacturer: Bently Nevada Product No.: 330880-16-40-037-03-02 Product Type: PROXPAC XL Proximity Transducer Made in: U.S.A Certificate Availability: Can add on Certificate Of Origin (COO) Probe and Configuration Options: Probe and Approvals Option: 16 (3300 XL 8 mm probe...
Vendor: Bently Nevada
330880-16-00-045-00-02 PROXPAC XL Proximity Transducer
Bently Nevada 330880-16-00-045-00-02 - PROXPAC XL Proximity Transducer This PROXPAC XL Proximity Transducer is proudly made in the U.S.A. and is available with an optional Certificate of Origin (COO). Product Features: Weight: 1.44 kg (3.2 lb) Temperature Range: -51 °C to +177 °C (-60...
Vendor: Bently Nevada
330880-28-00-105-02-02 New Bently Nevada
Bently Nevada PROXPAC XL Proximity Transducer Product No.: 330880-28-00-105-02-02 Type: PROXPAC XL Proximity Transducer Origin: Made in U.S.A | COO: Available Key Specifications Probe: 3300 XL 8 mm with Multiple Approvals Standoff Adapter: None Probe Penetration: 105 mm Fittings: Two 3/4-14 NPT fittings, one...
- Choosing a selection results in a full page refresh.