330910-16-23-10-02-00 - 3300 NSv Proximity Probe Bently Nevada

330910-16-23-10-02-00 Bently Nevada 3300 NSv Proximity Probe – Precision Vibration Monitoring

• Model & configuration: The 330910 features an M10X1 threaded case with stainless steel armor. It includes a 0 mm unthreaded length, a 230 mm overall case length, and a 1.0 meter total length with a miniature coaxial ClickLoc connector.

• Measurement range & sensitivity: Provides a 1.5 mm (60 mils) linear range starting 0.25 mm from the target. The incremental scale factor is 7.87 V/mm (200 mV/mil) with interchangeability error included.

• Linearity & accuracy: Maintains high precision with a deviation from best fit straight line (DSL) of less than ±0.06 mm (±2.3 mils) over the full linear range.

• Electrical specifications: Probe DC resistance for this 1.0 m length is 4.2 ±0.5 ohms. Extension cable capacitance is 69.9 pF/m typical, and it supports up to 305 m of field wiring.

• Environmental tolerance: Operates reliably from -52°C to +177°C (-62°F to +351°F). The probe case uses AISI 304 stainless steel, and the tip material is durable Polyphenylene sulfide (PPS).

• Mechanical installation: Finger-tight installation is recommended, with a maximum torque of 0.56 N•m (5 in•lb). The minimum bend radius for the cable is 25.4 mm (1.0 in).

• Frequency response: Achieves a typical response of 0 to 10 kHz (+0, -3 dB) even with the maximum 305 meters of field wiring between the probe and monitor.

• Target requirements: A minimum flat target diameter of 8.9 mm (0.35 in) is required, with 13 mm (0.5 in) recommended. For shaft diameters below 13 mm, expect a scale factor change.

• Pressure sealing: The probe seals differential pressure using a Viton O-ring. Note that units are not pressure tested before shipment unless specially requested.

• Package contents & logistics: Includes one 330910 probe with armor and a miniature coaxial ClickLoc connector. We ship new, original stock within 5 days via FedEx, UPS, or DHL and accept 30-day returns.

Frequently Asked Questions – 330910 M10X1 Probe

• Is the 330910 compatible with my existing 3300 RAM system? Yes, it is mechanically and electrically interchangeable with previous 3300 RAM proximity probes and extension cables, offering superior chemical resistance.

• What is the recommended gap setting for this M10 probe? Set the initial gap to 1.0 mm (40 mils) to operate within the linear range from 0.25 to 1.75 mm from the target.

• What type of connector does the 330910 use? This model comes with a miniature coaxial ClickLoc connector with standard cable, providing a secure and reliable connection.

• Can I use this probe with a 3300 XL NSv Proximitor? Absolutely. It works seamlessly with the 3300 XL NSv Proximitor Sensor using three-conductor shielded triad cable up to 305 meters.

• What is the difference between the 330909 and the 330910? The primary difference is the thread type: the 330910 has an M10X1 metric thread, while the 330909 has a 3/8-24 UNF thread.

• What torque should I apply to the M10X1 case? For the connector-to-connector joint, the recommended torque is 11.3 N•m (100 in•lb). For the probe case installation, do not exceed 0.56 N•m (5 in•lb).

• How long does shipping take for this item? We keep the 330910 in stock. We will dispatch your order within 5 working days via FedEx, UPS, or DHL.

• What is the weight of this probe? The probe weight is approximately 14 to 150 grams (0.5 to 5.3 oz), depending on the specific configuration.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | Phone: +86 153 9242 9628