GE Fanuc IC660TSA020 | Genius Analog Terminal Assembly

GE Fanuc IC660TSA020 Analog I/O Terminal Assembly

The IC660TSA020 is a precision analog I/O terminal assembly designed for accurate signal conditioning and interface in industrial control systems. 

Precision Analog Interface

• Measurement Accuracy: 0.2% full-scale accuracy at 25°C
• Signal Resolution: 12-bit resolution for precise signal handling
• Primary Compatibility: IC660BBA020 analog I/O block
• Signal Range Support: 5 voltage/current signal ranges
• Temperature Coefficient: ±0.005%/°C typical drift
• Linearity Error: < 0.1% of full scale
• Repeatability: ±0.05% of reading typical
• Update Rate: Configurable 10-100 ms scan times

Compact Dimensions

• Physical Dimensions: 8.83" × 3.5" × 3.94" (224mm × 89mm × 100mm)
• Product Weight: 4 lbs (1.8 kg)
• Mounting Method: DIN rail mounting saves panel space
• Spacing Requirement: 2" minimum spacing between blocks for airflow
• DIN Rail Type: Standard 35 mm DIN rail (EN 60715)
• Panel Space: Occupies 8.83 inches of DIN rail length
• Housing Material: UL94V-0 rated thermoplastic

Model Compatibility

• Terminal Assembly: IC660TSA020 (this unit)
• Analog I/O Block: IC660BBA020 complete assembly
• Electronics Assembly: IC660EBA020 electronic components
• System Integration: GENIUS I/O communication network
• Controller Compatibility: GE Series 90-30/90-70 PLCs
• Configuration Software: GE Fanuc configuration tools required

Signal Ranges Supported

• Voltage Ranges:
  • 0 to 10V DC
  • -10 to +10V DC
  • -5 to +5V DC
  • 0 to 5V DC
  • 1 to 5V DC
• Current Range:
  • 4 to 20mA (with 250Ω input impedance)
• Input Impedance: > 1 MΩ for voltage inputs
• Output Drive: Up to 20mA current source capability
• Common Mode Rejection: > 120 dB at 50/60 Hz
• Normal Mode Rejection: > 60 dB at 50/60 Hz

Installation Requirements

• Enclosure: DIN rail mounting in protected industrial enclosure
• Grounding: 12 AWG ground wire connection required
• Temperature Range: Free airflow within 0-60°C (32-140°F)
• Environment: Clean, contaminant-free industrial environment
• Mounting Orientation: Vertical or horizontal mounting supported
• Wire Preparation: Strip wires to 7-8 mm (0.28-0.31 in) length
• Terminal Torque: 0.5-0.6 Nm (4.4-5.3 lb-in) for screw terminals
• Cable Entry: Bottom or top entry depending on installation

Advanced Configuration

• Scaling Functions: Independent input/output scaling with engineering units
• Input Filtering: Adjustable digital filtering for noise rejection
• Alarm Limits: Configurable high/low alarm limits with deadbands
• Fault Reporting: Comprehensive fault detection and reporting controls
• Range Detection: Over-range and under-range detection capabilities
• Burnout Detection: Upscale or downscale indication for sensor failure
• Linearization: Optional linearization for non-linear sensors
• Sample Rate: Configurable sampling rates for different applications

Environmental Specifications

• Operating Temperature: 0°C to 60°C (32°F to 140°F)
• Storage Temperature: -40°C to 85°C (-40°F to 185°F)
• Relative Humidity: 5% to 95% non-condensing
• Vibration Resistance: 5-500 Hz, 2G maximum
• Shock Resistance: 15G for 11 ms duration
• Pollution Degree: Degree 2 per IEC 61131-2
• Altitude Rating: Up to 2000 meters (6562 feet) without derating

Package Includes

• Primary Component: IC660TSA020 terminal assembly unit
• Mounting Hardware: DIN rail mounting clips and hardware
• Grounding Screw: Dedicated grounding screw for proper earthing
• Documentation: Complete installation and configuration documentation
• Terminal Blocks: Removable screw terminal blocks for easy wiring
• Labeling: Terminal identification labels and markers
• Packaging: Protective packaging for safe transportation

Electrical Protection

• Overvoltage Protection: Withstands up to 50V continuous on inputs
• Short Circuit Protection: Current limiting on output circuits
• Reverse Polarity Protection: Protected against incorrect connections
• ESD Protection: ±8 kV contact discharge per IEC 61000-4-2
• Isolation: 1500V between analog circuits and power supply
• Safety Certifications: UL 508, CSA 22.2 No. 142, CE marked

Shipping & Support

• Shipping Methods: Available via FedEx, UPS, DHL with tracking
• Lead Time: Typically ships within 3-7 business days
• Technical Support: Available for installation and configuration questions
• Warranty: Standard manufacturer warranty applies

Frequently Asked Questions

• What does 12-bit resolution mean? 4096 discrete steps for precise signal representation.
• Can this handle both voltage and current signals? Yes, supports multiple voltage ranges and 4-20mA current.
• Is special configuration software required? Yes, GE Fanuc configuration software is needed for setup.

For analog system design and technical support for the IC660TSA020 terminal assembly, contact our engineering team.

Contact Information:
Email: sales@nex-auto.com
Phone/WhatsApp: +86 153 9242 9628

Partner: AutoNex Controls Limited

© 2025 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/