GE Fanuc High Capacity Power Supply (IC693PWR330) Specifikacije Snaga: 30 Wata Težina: 0,64 kg Nazivni ulazni napon: 120/240 VAC ili 125 VDC Raspon ulaznog napona (AC): 85 do 264 VAC Raspon ulaznog napona (DC): 100 do 300 VDC Ključne značajke Visoka učinkovitost: Dizajnirano za...

GE Fanuc Versamax DC napajanje Model: IC200PWR012 (sufiks PWR012 označava izolirani DC napajajući modul) Ključne specifikacije Ulazni napon: 18 – 30 V DC Ulazna snaga: 11 W Ulazni strujni udar: 20 A @ 24 V DC Izlazni naponi: 5 V DC & 3.3 V...

Dodatne specifikacije: Broj priključaka: 18 pojedinačnih opružnih stezaljki Metoda montaže: Kompatibilno s 35 mm DIN vodilicama i izravnom montažom na ploču Nominalni napon izolacije: maksimalno 300 VAC Otpornost kontakta: Manje od 15 mΩ (mjereno pri 1A, 5V DC) Dielektrična čvrstoća: 2000 VAC 1 minutu...

Key Technical Specifications: Full Model: IC693MDL653 Series: 90-30 Programmable Logic Controller Nominal Input Voltage: 24 VDC Input Voltage Range: 19.2 VDC to 28.8 VDC Input Signal Operating Range: 19.2 VDC to 26.4 VDC Input Current per Channel: 7.5 mA at 24 VDC Minimum On-State Voltage: 15 VDC Maximum Off-State Voltage: 6...

IC693PWR328 Key Technical Specifications Input Voltage: 48 Volts DC Output Voltage (Relay): 24 Volts DC, 15 Watts Output Voltage (Isolated): 24 Volts DC, 20 Watts Output Voltage (CPU): 5 Volts DC, 15 Watts Total Power Output: 30 Watts Max Communication Port: RS 485 Serial...

GE Fanuc IC693TCM303 Temperature Control Module Technical Specifications Model: IC693TCM303 Input type: Thermocouple (max impedance 35 Ohms) Output voltage range: 18 to 30 Volts DC Load current per output: 100 mA External power supply: 18 to 36 Volts DC, 2.5 Amps inrush Operating temperature:...

Meet the IC694 DNM200 (DeviceNet Master Module), designed for the PACSystem RX3i and Series 90‑30 platforms. This module enables seamless communication with up to 63 DeviceNet slaves and supports robust data exchange of 255 Bytes input and 255 Bytes output per node. Model Suffix: DNM200 Ports: 1...

Overview The GE Fanuc IC695ECM850 Ethernet communication module connects RX3i PacSystem controllers to IEC 61850 networks, enabling seamless substation automation. Key Features 4 switched Ethernet ports (RJ‑45 ×2, SFP cages ×2) Supports 10/100/1000 Mbps over copper and 100/1000 Mbps over single‑mode & multi‑mode fiber Hot‑swappable—install or remove...

Pregled IC697CPU780 Objašnjenje modela i sufiksa “IC697CPU” označava liniju CPU serije 90-70, dok sufiks 780 označava verziju spremnu za redundantnost s poboljšanim memorijskim i sinkronizacijskim značajkama. Detaljne specifikacije Procesor: 80386DX mikroprocesor @ 16 MHz Brzina izvršavanja Booleove logike: 0.4 µs po instrukciji Diskretna I/O...

IC697MEM719 CMOS Expansion Memory The IC697MEM719 module seamlessly extends program and data storage on GE Series 90‑70 CPUs (models 771/772) and PCMs. Highlights Capacities: 64 KB, 128 KB, 256 KB, 512 KB Shelf Life: 1 year @ 20 °C Retention: 6 months without power Temp Range: –20 °C to +60 °C Power: 150 mW typical MTBF: 100,000 hrs @ 25 °C...

GE Fanuc - Modul CPU s jednim utorom IC693CPU372 Korisnička memorija: 120 KB Model procesora: AMD SC520 Brzina procesora: Radi na 133 MHz Kapacitet I/O točaka: Podržava do 2048 I/O točaka Tipično vrijeme skeniranja: 0,15 ms po 1K Booleove logike Memorija registara: Dostupno 240...

GE Fanuc - Standardni Izvor Napajanja IC693PWR321 Ulazni napon: 120/240 VAC ili 125 VDC Raspon AC ulaza: 85 do 264 VAC Raspon DC ulaza: 100 do 300 VDC Ocjena ulazne snage: 90 VA (AC), 50 W (DC) Specifikacije izlaza 5V DC izlaz: Raspon od...

GE Fanuc IC695CRH003 Harness Assembly for RX3i PACSystems Core Specifications Brand: GE Fanuc Series: RX3i PACSystem Part Number: IC695CRH003 Product Type: Harness Assembly Compatible Modules: IC697MDL250 (90-70) and IC694MDL260 (RX3i) Voltage Type: AC Voltage Rating: 120 Volts AC Electrical and Mechanical Characteristics Number of...

About the Model Number – IC694ALG233: IC694: Indicates PACSystems RX3i product line ALG: Denotes Analog input module type 233: Specific model for 16-channel analog current input with diagnostics and enhanced features Key Technical Details of IC694ALG233: Total Input Channels: 16 Single-ended Supported Input Ranges:...

📦 IC697BEM731 Bus Controller Module Genius I/O System Component Specifikacije Broj dijela: IC697BEM731 Radni napon: 5.0 Volt DC Struja stražnje ploče: 1.3 Ampera Tip: Modul sabirničkog kontrolera Širina: Jedan utor Težina: 0.907 kg Značajke Ugrađeni portovi: 1 sabirnički kontroler, 1 ručni terminal Brzina prijenosa...

GE Fanuc IC697MDL640 Electrical Specifications Rated voltage: 125 V DCInput current: 5 mA per pointTotal current required: 0.3 AInput range: –35 to 145 V DCInput impedance: 20 kΩ nominal Physical Dimensions & Weight Width: 25 mmHeight: 128 mmDepth: 118 mmWeight: 0.8 kgShelf life: 1 year Operational Characteristics Operating temperature: –20 °C to +60 °CInsulation voltage: 1500 VrmsMounting shock: 50 g,...

🔍 GE Fanuc VersaMax Discrete Output Module Opće informacije Proizvođač: GE Fanuc Broj proizvoda: IC200MDL742 Tip: VersaMax modul diskretnog izlaza Specifikacije izlaza Raspon napona: 18-30 VDC (nominalno 24 VDC) Dostupne točke: 32 Ocjena struje (po točki): 0,5 A Vrijeme odziva prekidača: 0,5 ms za...

Key Technical Specifications: Brand: GE Fanuc Series: Series 90-30 PLC Part Number: IC693CBL310 Description: I/O Interface Cable Assembly Kit Cable Length: 10 feet (3.05 meters) per cable Connector Type: 24-Pin Female Fujitsu Connector Cable Type: Interface Cable with Stripped and Tinned Colored Lead Wires...

Product Overview The IC693ACC337 terminal block quick‑connect system for GE Fanuc Series 90‑30 PLC simplifies I/O wiring with a snap‑on DIN‑rail mount and factory‑made cable interface. Quick Installation Mounts in under 2 minutes on standard DIN rail No tools beyond captive screwdriver Over 500 mating cycles...

Key Features of IC693BEM332: Full Model Number: IC693BEM332 (BEM - Bus Expansion Module, 332 - FIP I/O Interface Variant) Compatible Series: GE Fanuc Series 90-30 Programmable Logic Controllers Communication Standard: Factory Instrumentation Protocol (FIP) Transmission Speed: 2.5 MHz for fast and stable data exchange...