GE Fanuc IC755ACC15GAS Replacement Gasket

Maintain IP65 Seal for Your 15-Inch Quickpanel+ HMI

Ensure continued environmental protection for your high-performance operator interface with the genuine GE Fanuc IC755ACC15GAS replacement gasket. This part restores the critical seal for 15-inch Quickpanel+ units installed in metal enclosures. It is essential for maintaining the IP65 rating and protecting the internal ARM Cortex A8 computer from harsh industrial conditions.

Core Technical Specifications

• Brand & Manufacturer: GE Fanuc (Emerson)
• Product Line & Model: Quickpanel+ / IC755ACC15GAS
• Type: Replacement Mounting Gasket
• Compatibility: 15-inch Quickpanel+ Operator Interface Terminals
• Required Enclosure: Metal, with IP65 Environmental Protection Rating
• Panel Cutout Size: 14.92 x 12.01 inches (Required for Installation)
• Alternative Mount: VESA 100 x 100 mm (3.94 x 3.94 inches) Compatible
• Unit Dimensions (HMI): 15.71 x 12.72 x 2.76 inches
• Unit Weight (HMI): Approximately 9.83 lbs

System Specifications (Compatible Quickpanel+ Unit)

• Processor: 1 GHz ARM Cortex A8
• Operating System: Windows Embedded Compact 7
• Input Voltage: +12/24 VDC (±20% Tolerance)
• Power Consumption: Maximum 30 Watts
• Current Consumption: 2.5A @ 12VDC, 1.25A @ 24VDC
• Compliance: EU RoHS Directive 2011/65/EU

Key Features and Benefits

• Restores IP65 Integrity: This gasket is critical for maintaining the dust-tight and water-jet resistant seal of the enclosure.
• Field-Replaceable Design: Allows for easy on-site maintenance without returning the entire HMI unit.
• Protects Internal Electronics: A fresh gasket shields the sophisticated computer from moisture, dust, and corrosive gases.
• Preventive Maintenance Part: Replacing a worn or damaged gasket prevents costly failures of the Quickpanel+ terminal.
• Ensures Proper Mounting: Facilitates correct installation into the specified panel cutout or VESA mount.

Installation and Handling Guidelines

• Install the Quickpanel+ terminal in a well-ventilated metal enclosure rated for IP65 protection.
• Locate the enclosure in an area protected from rain, direct sunlight, dust, and corrosive gases.
• Handle with Care: Exercise caution during installation to avoid damaging the HMI touchscreen or housing.
• Minimize Insertion/Removal: Repeatedly taking the unit in and out of the enclosure will accelerate gasket wear and damage.
• For full protection, always use a new IC755ACC15GAS gasket when reinstalling or servicing the unit.
• Ensure all power (12/24VDC) to the unit is disconnected before beginning any installation work.

Frequently Asked Questions (FAQ)

• When should I replace this gasket?
  Replace it if the original is torn, deformed, or if you are reinstalling the HMI into a panel to ensure a perfect IP65 seal.
• What does IP65 mean for my installation?
  IP65 rating requires this gasket to seal the enclosure as "dust-tight" and protected against low-pressure water jets from any direction.
• Can I install the 15-inch Quickpanel+ without this gasket?
  No. Using the correct IC755ACC15GAS gasket is mandatory to achieve the environmental protection the HMI is designed for.
• Why must the enclosure be metal?
  The mounting and sealing specification for this HMI family is designed specifically for a grounded metal enclosure for stability and EMI protection.
• What are the power requirements for the HMI itself?
  The compatible unit requires a 12 or 24VDC power supply and can consume up to 30 Watts (2.5A @ 12VDC).
• Is the unit compliant with environmental regulations?
  Yes, the Quickpanel+ terminal complies with the EU RoHS directive 2011/65/EU.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | Phone: +86 153 9242 9628

Partner: AutoNex Controls Limited