-
Vendor: General Electric
IC694BEM340 Control Module | GE Fanuc Emerson
IC694BEM340 Key Functional Highlights: Communication speeds supported: 38.4 Kbps, 76.8 Kbps, and 153.6 Kbps, suitable for different cable lengths and response requirements. Supports 8 bus controllers per RX3i system, offering scalability for large applications. Integrated diagnostic routines that run continuously to monitor faults and... -
Vendor: General Electric
IC694DSM314 Motion Controller Module | GE Fanuc
Introducing the IC694 DSM314 (Motion Mate Module) for PACSystem RX3i & Series 90‑30. Seamlessly integrate advanced motion control in Standard or Follower modes with electronic CAM support. Model Suffix: DSM314 Compatible CPUs: All RX3i CPUs (v1.0+) and Series 90‑30 Installation: RX3i Serial Expansion Rack or Series 90‑30... -
Vendor: General Electric
IC694DSM324 Controller Module GE Fanuc Emerson
IC694DSM324 Motion Controller Module Model Suffix: DSM324 The suffix DSM denotes “Digital Servo Motion,” and 324 identifies the four‑axis capability and 13‑bit analog resolution. Key Features Axes: 1 to 4 programmable axes with individual encoder interfaces and home/overtravel inputs Firmware: 512 KB flash, upgradeable in‑field to support... -
Vendor: General Electric
IC695ACC402 CPU Energy Pack GE Fanuc PACSystem RX3i
Spesifikasi teknis Informasi Umum: Parameter Nilai 🏷️ Merek Perusahaan GE Fanuc 🔢 Model IC695ACC402 🔧 Seri PACSistem RX3i 🔋 Jenis Produk Paket Energi untuk CPU 🔗 Pengontrol yang Kompatibel CPE330 ⚙️ Jenis Pemasangan Rel DIN / Panel 🔌 Sumber Daya Bidang Belakang PLC 💡... -
Vendor: General Electric
IC695CPE302 GE Fanuc Emerson - RX3i CPE302 Controller
IC695CPE302 Technical Data Model Prefix: IC695 Model Suffix: CPE302 Processor Speed: 1.1 GHz Program Storage: 2 MB SRAM/Flash Discrete I/O Capacity: 16 384 bits Analog I/O Capacity: 16 384 words Power Requirements: 1 A @ +5 VDC, 1 A @ +3.3 VDC, 0.5 A @ +24 VDC Communications: RS‑232 serial, Ethernet port, USB 2.0 Protocol Support: Modbus RTU Slave, SNP Slave, Serial I/O... -
Vendor: General Electric
IC695CPE310 RX3i CPE310 Controller | GE Fanuc Emerson
IC695CPE310 Technical Specifications Model Prefix: IC695 Model Suffix: CPE310 Processor Speed: 1.1 GHz User Logic Memory: 10 MB Flash/SRAM Discrete I/O Capacity: 32 768 bits Analog I/O Capacity: 32 768 words Communication Ports: 1 × Ethernet (10/100 Mbps), 1 × RS‑232, 1 × RS‑485, 1 × USB 2.0 Master Supported Protocols: SNP, Serial I/O, Modbus RTU Slave/Master Power Requirements: 1 A @ +5 VDC, 1 A... -
Vendor: General Electric
IC695CPK330 Controller with Energy Pack | GE Fanuc Emerson
GE Fanuc / Emerson IC695CPK330 – High-Performance RX3i CPU with Energy Pack Technical Specifications Brand: GE Fanuc / Emerson Automation Series: PACSystem RX3i Part Number: IC695CPK330 Processor: 1 GHz CPU (Clock speed: 1.6 GHz internal bus) RAM: 64 MB Non-volatile Memory: 64 MB Energy... -
Vendor: General Electric
IC697CGR935 | Pengendali CPU Redundansi | Perusahaan GE Fanuc
IC697CGR935 Pengendali CPU Redundansi - GE Fanuc Ringkasan: Model: IC697CGR935 Berat: Hanya 0.7 kg, kompak untuk pemasangan yang mudah. Spesifikasi teknis: Konsumsi Saat Ini: Mempertahankan 3,1 Amper untuk operasi yang stabil. Kapasitas Memori: Dilengkapi dengan 1 MB CMOS RAM untuk pemrosesan data yang efisien.... -
Vendor: General Electric
IC697CMM711 GE - Modul Koperasi Komunikasi
IC697CMM711 - Modul Koperasi Komunikasi GE Jenis Modul: Koprosesor Komunikasi Berat: 0,9kg Dukungan Protokol: CCM, RTU, SNP, dan SNPx Persyaratan Saat Ini: 0,7 ampere Jumlah Slot: Slot Tunggal (Satu) Dimensi: 11,15 x 19,00 x 7,5 inci (283mm x 483mm x 190mm) Port Seri: 2... -
Vendor: General Electric
IC697CPM790 | GE Series 90-70 GMR Redundant CPU
IC697CPM790 GE Fanuc - Kontroler Seri 90-70 Pabrikan: GE Fanuc Seri: Seri 90-70 Nomor Bagian: IC697CPM790 Slot Instalasi: 1 Dimensi: 21 cm x 23 cm x 5 cm Berat: 0,6kg Indikator LED: 4 Fungsi Khusus: Triple Modular Redundancy (TMR) Microprocessor: 64 MHz, 80486DX2 Waktu... -
Vendor: General Electric
IC697CPM914 | CPU Module GE Fanuc
IC697CPM914 32MHz CPU Module | Series 90-70 PLC Technical Specifications Base Model: IC697 Suffix: CPM914 (32MHz CPU) Series: 90-70 Processor: 80486DX (32-bit) Clock Speed: 32MHz Power: 5VDC @ 2.8A (14W max) Memory: 512KB SRAM (lithium battery backup, 6-month retention) Analog I/O: 8000 max Mixed... -
Vendor: General Electric
Modul CPU IC697CPM915 GE Fanuc 90-70 PLCs
Spesifikasi teknis Ikhtisar Produk: Parameter Nilai 🖥️ Jenis Produk Modul CPU 🔢 Nomor Bagian IC697CPM915 🏷️ Merek Perusahaan GE Fanuc Kinerja & Fitur: Parameter Nilai ⏱️ Kecepatan Jam 32MHz 💾 Memori 1MB RAM 🔌 Catu Daya 5V DC, 2,8 Amper arus yang ditarik 🌐... -
Vendor: General Electric
IC697CPM924 Floating Point CPU - GE Fanuc
GE Fanuc IC697CPM924 Series 90-70 CPU Module – High-Performance 32-bit Control Key Technical Highlights: Processor Speed: 64 MHz 32-bit microprocessor RAM Capacity: 1 MB onboard user memory Floating Point Operation: Supported for enhanced calculation accuracy Battery Backup Retention: Retains memory for 6 months without... -
Vendor: General Electric
IC697CPU732 Controller CPU | GE Fanuc
GE Fanuc IC697CPU732 Series 90-70 CPU Module – 12 MHz 80C198 Processor for Reliable Industrial Control Core Technical Features: Processor: 80C198, clocked at 12 MHz Voltage Input: 5 VDC Current Draw: 1 Amp from PLC backplane Serial Port: 1 port supporting RS-485 and RS-422... -
Vendor: General Electric
Modul CPU IC697CPU771 GE Fanuc
📦 IC697CPU771 Modul CPU Unit Pemrosesan Sentral yang Dapat Diperluas oleh GE Fanuc Fitur Utama Jenis CPU: CPU Slot Tunggal Kecepatan Pemrosesan: 12 MHz, mikroprosesor 80C186 Input/Output: 2K I/O (campuran apa pun), hingga 8K analog I/O Waktu Fungsi Boolean: 0,4 mikrodetik Memori: Hingga 512... -
Vendor: General Electric
IC697CPU781 GE Fanuc - Modul CPU PLC
GE Fanuc IC697CPU781 - Ikhtisar Modul CPU PLC Kompatibilitas: GE Fanuc 90-70 PLCs Spesifikasi Inti Tegangan Masukan: 5 Volt DC Undian Saat Ini: 1,6 Amp Kecepatan jam: 16 Megahertz Mikroprosesor: 80386DX Memori Maksimum: 512 Kilobyte Atribut fisik Ukuran: 27 cm x 26 cm x... -
Vendor: General Electric
IC697CPU782 GE Fanuc - Unit Pemrosesan Sentral
GE Fanuc Unit Pemrosesan Pusat Model: IC697CPU782 Fitur Produk Microprocessor: Ditenagai oleh arsitektur 16 MHz, 32-bit 80386DX, memastikan kemampuan pemrosesan yang kuat. Memori yang Dapat Diperluas: Mendukung memori ekspansi yang didukung baterai hingga 512 Kbytes dalam slot yang sama untuk meningkatkan kinerja. Kecepatan Pemrosesan... -
Vendor: General Electric
IC697CPU789 | GE Fanuc Series 90-70 CPU Module
IC697CPU789 Module Overview The IC697CPU789 is a single-slot 32-bit CPU engineered for Triple Modular Redundancy (TMR) systems, delivering fault-tolerant control with seamless majority-voting logic. Model & Suffix Explanation “IC697CPU” denotes the Series 90-70 CPU family; the suffix 789 signifies hardware optimized for three-unit synchronization,... -
Vendor: General Electric
IC697CPX772 | Modul CPU | GE Fanuc Seri 90-70
Spesifikasi Teknis untuk IC697CPX772 Merk: GE Fanuc Tipe Produk: Modul CPU Seri: Seri 90-70 Nomor Bagian: IC697CPX772 Kecepatan Jam: 96 Megahertz Arus Saat Ini: 3.1 Amper Tegangan Masukan : 5 Volt DC Kapasitas I/O Analog: Hingga 8K Port Seri: 3 Waktu Eksekusi Boolean: 0,4... -
Vendor: General Electric
IC697CPX782 Modul CPU GE Fanuc 90-70 PLCs
Spesifikasi teknis Ikhtisar Produk: Parameter Nilai 🏷️ Merek Perusahaan GE Fanuc 📦 Model IC697CPX782 🖥️ Seri Seri 90-70 ⚙️ Jenis Produk Modul CPU 🔌 Kompatibilitas GE Fanuc 90-70 PLC Pertunjukan: Parameter Nilai 🧠 RAM 1 MB 🔋 RAM NV 256 KB 💻 Mikroprosesor 80486DX4...
Tersedia 24/7 di
+86 15392429628
Vendor: Bently Nevada
PROXPAC XL Proximity Transducer 330880-16-40-037-03-02
Bently Nevada PROXPAC XL Proximity Transducer Manufacturer: Bently Nevada Product No.: 330880-16-40-037-03-02 Product Type: PROXPAC XL Proximity Transducer Made in: U.S.A Certificate Availability: Can add on Certificate Of Origin (COO) Probe and Configuration Options: Probe and Approvals Option: 16 (3300 XL 8 mm probe...
Vendor: Bently Nevada
330880-16-00-045-00-02 PROXPAC XL Proximity Transducer
Bently Nevada 330880-16-00-045-00-02 - PROXPAC XL Proximity Transducer This PROXPAC XL Proximity Transducer is proudly made in the U.S.A. and is available with an optional Certificate of Origin (COO). Product Features: Weight: 1.44 kg (3.2 lb) Temperature Range: -51 °C to +177 °C (-60...
Vendor: Bently Nevada
330880-28-00-105-02-02 New Bently Nevada
Bently Nevada PROXPAC XL Proximity Transducer Product No.: 330880-28-00-105-02-02 Type: PROXPAC XL Proximity Transducer Origin: Made in U.S.A | COO: Available Key Specifications Probe: 3300 XL 8 mm with Multiple Approvals Standoff Adapter: None Probe Penetration: 105 mm Fittings: Two 3/4-14 NPT fittings, one...
- Choosing a selection results in a full page refresh.