GE Fanuc IC660EBS100 Electronic Assembly | Isolated I/O Block

GE Fanuc IC660EBS100 115Vac/125Vdc Isolated I/O Electronic Assembly Block

The IC660EBS100 is a versatile isolated I/O electronic assembly from GE Fanuc's GENIUS system, supporting dual voltage operation with high-speed counting capabilities. 

Voltage & Power Configuration

• Model Number: IC660EBS100
• Manufacturer: GE Fanuc (Emerson Automation)
• Primary Voltage Options: 125V DC or 115V AC operation
• DC Voltage Range: 10–30V DC (also functions as backup power)
• Simultaneous Operation: Supports AC and DC power simultaneously
• Backup Power Capability: Automatic failover from AC to DC without interruption
• Power Consumption: Typically 5-10W depending on configuration
• Frequency Range (AC): 47–63 Hz when operating on AC power

Input/Output Features

• Total Circuits: 8 isolated I/O circuits total
• Output Control: 4 configurable outputs with flexible assignment
• Output Signal: 5V DC output + square wave oscillator (timing reference)
• Diagnostic Capabilities: Failed switch detection and status monitoring
• Circuit Isolation: 1500V isolation between I/O circuits and power
• Input Types: Supports both digital and pulse input signals
• Output Types: Configurable as digital outputs or pulse outputs

High-Speed Counter Performance

• Maximum Frequency: Up to 200 kHz signal input processing
• Counter Resolution: 32-bit internal counting capability
• Counting Modes: Up/Down, quadrature, pulse/direction, rate measurement
• Meter Proving Applications: Precision flow measurement and verification
• Turbine Flowmeter Support: Accurate RPM and flow rate measurement
• Motion Control: Position tracking and speed monitoring
• Material Handling: Production counting and parts monitoring
• Velocity Monitoring: Speed measurement and overspeed detection
• Response Time: < 5 μs for high-speed input signals

Electrical Specifications

• Input Voltage Levels: 5V TTL, 12V, 24V compatible with proper configuration
• Output Current Capacity: Up to 500 mA per output channel
• Output Voltage Range: 5-30V DC configurable
• Isolation Voltage: 1500V RMS input-to-output and channel-to-channel
• Signal Accuracy: ±0.1% of reading typical for frequency measurement
• Update Rate: 1 ms typical for counter value updates
• Noise Immunity: > 1000V/microsecond common mode rejection

Environmental Specifications

• Operating Temperature: 0°C to 60°C (32°F to 140°F)
• Storage Temperature: -40°C to 100°C (-40°F to 212°F)
• Relative Humidity: 5% to 95% non-condensing
• Product Weight: 1.09 kg (2.40 lb)
• Dimensions: Approximately 90 × 115 × 120 mm (3.54 × 4.53 × 4.72 inches)
• Vibration Resistance: 5–500 Hz, 2G maximum
• Shock Resistance: 15G for 11 ms duration
• Ingress Protection: IP20 when installed in proper enclosure

Application Examples

• Flow Measurement: Turbine flowmeter signal processing and totalization
• Production Counting: Parts counting on assembly lines and packaging systems
• Motion Control: Encoder feedback for position and speed control
• Energy Management: Power monitoring and consumption measurement
• Test & Measurement: Frequency and RPM measurement in test equipment
• Process Control: Batch counting and process timing applications

Installation & Configuration

• Mounting: Installs in compatible GENIUS block base assembly
• Wiring: Use shielded cable for high-frequency signals (>10 kHz)
• Configuration: Programmed via GE Fanuc configuration software
• Power Connections: Separate terminals for AC and DC power inputs
• Signal Connections: Screw terminal or spring clamp options available
• System Integration: Compatible with GE Series 90-30/90-70 PLC systems

Package & Shipping

• Package Contents: IC660EBS100 electronic assembly unit
• Shipping: Available via FedEx, UPS, DHL with tracking
• Lead Time: Typically ships within 3-7 business days
• Warranty: Standard manufacturer warranty applies

Frequently Asked Questions

• Can it operate on both AC and DC simultaneously? Yes, with automatic failover if one power source fails.
• What is the maximum encoder frequency supported? Up to 200 kHz for single-ended signals.
• Is special configuration software required? Yes, GE Fanuc configuration software is needed for setup.

For application engineering and technical support for the IC660EBS100 electronic assembly, contact our team.

Contact Information:
Email: sales@nex-auto.com
Phone/WhatsApp: +86 153 9242 9628

Partner: AutoNex Controls Limited

© 2025 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/