GE Fanuc IC660EBS103 | Genius LAN Electronic Block

GE Fanuc IC660EBS103 GENIUS Electronic Assembly (EBS Only)

The IC660EBS103 is a high-isolation electronic assembly designed for Genius LAN systems, featuring enhanced electrical isolation and configurable filtering. 

Product Identification

• Full Model Number: IC660EBS103
• Manufacturer: GE Fanuc (Emerson Automation)
• Suffix Interpretation: -103 indicates EBS-only variant for high-isolation Genius LAN systems
• Product Type: GENIUS Electronic Assembly (electronic block assembly only)
• System Compatibility: Genius Local Area Network (LAN) systems
• Base Requirement: Requires compatible block base for complete assembly

Electrical Specifications

• Power Supply Range: 93 to 132 V AC or 105 to 132 V DC
• Frequency Range: 47 to 63 Hz for AC operation
• Nominal Voltage: 115V AC / 125V DC standard
• Block Power Consumption: Typically 5-10W depending on configuration
• Current Requirement: 70-150 mA typical at nominal voltage
• Power Supply Dropout Tolerance: 1 cycle (16-20 ms based on frequency)
• Maximum Ripple: 10% of DC supply voltage

Isolation & Protection Features

• Block-to-Block Isolation: 1500 Volts continuous rating
• Input/Output Isolation: 1500V between I/O circuits and power supply
• Group Isolation: 250V between circuit groups
• Transient Protection: Withstands 2000V peaks for 10 seconds
• Input Filter Time: Selectable from 10 ms to 100 ms in 10 ms steps
• Noise Immunity: > 1500 V/μs common mode rejection ratio
• ESD Protection: ±8 kV contact discharge capability

Thermal & Power Dissipation

• Maximum Heat Dissipation: Up to 45.6 Watts (8 Outputs @ 2 Amps each)
• Typical Dissipation: 16-30 Watts under normal operating conditions
• Thermal Design: Aluminum housing with integrated heat sinking
• Cooling Method: Natural convection, no forced cooling required
• Temperature Monitoring: Built-in thermal protection with automatic shutdown
• Heat Sink Area: Approximately 200 cm² effective surface area

Input/Output Configuration

• Total Circuits: 8 configurable I/O circuits
• Circuit Groups: Organized in 4 isolated pairs (2 circuits per group)
• Circuit Types: Independently configurable as digital inputs or outputs
• Input Voltage Range: 0-132V AC/DC compatible
• Output Current Capacity: Up to 2A per circuit continuous
• Response Time: Configurable via 10-100 ms filter settings
• Status Indicators: Per-circuit LEDs plus module health indicators

Environmental Ratings

• Operating Temperature: 0 to 60°C (32 to 140°F)
• Storage Temperature: -40 to 100°C (-40 to 212°F)
• Relative Humidity: 5% to 95% non-condensing
• Altitude Rating: Up to 2000 meters (6562 feet) without derating
• Vibration Resistance: 5–500 Hz, 2G maximum acceleration
• Shock Resistance: 15G for 11 ms duration
• Shelf Life: 1 year in original packaging at recommended conditions
• Ingress Protection: IP20 when installed in proper enclosure

Physical Specifications

• Product Weight: 1.8 kg (4.0 lbs)
• Dimensions: Approximately 22.44 × 8.89 × 10.00 cm (8.83 × 3.50 × 3.94 in)
• Housing Material: Aluminum alloy for EMI protection and heat dissipation
• Mounting: Designed for installation in compatible block base assembly
• Connector Type: Screw terminal or spring clamp options available
• Color: Standard industrial gray with status indicator window

Performance Characteristics

• Filter Response Time: Programmable 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 ms
• Update Rate: 1-10 ms configurable via system parameters
• Accuracy: ±1% of reading for analog-style monitoring functions
• Repeatability: ±0.5% typical for consistent operation
• Diagnostic Coverage: Comprehensive circuit status and fault detection
• Communication Interface: Genius LAN protocol compatible

Installation & Configuration

• Base Compatibility: Requires specific block base for complete assembly
• Wiring Requirements: Use 18-14 AWG (0.75-2.5 mm²) wire
• Terminal Torque: 0.5-0.6 Nm (4.4-5.3 lb-in) for screw terminals
• Configuration Software: GE Fanuc configuration tools required
• Filter Setting: Configurable via software for each input circuit
• System Integration: Compatible with Genius LAN control systems

Package & Shipping

• Package Contents: IC660EBS103 electronic assembly unit only
• Shipping: Available via FedEx, UPS, DHL with tracking
• Lead Time: Typically ships within 3-7 business days
• Storage Recommendation: Store in original packaging at controlled conditions
• Warranty: Standard manufacturer warranty applies

Frequently Asked Questions

• What does "EBS-only" mean? This is the electronic assembly only, requires a separate block base.
• Why is 1500V isolation important? For safety and noise immunity in high-voltage industrial environments.
• How does selectable filtering work? Software configurable to reject noise while maintaining appropriate response speed.

For technical specifications and configuration support for the IC660EBS103 electronic assembly, contact our team.

Contact Information:
Email: sales@nex-auto.com
Phone/WhatsApp: +86 153 9242 9628

Partner: AutoNex Controls Limited

© 2025 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/