GE Fanuc IC660TSA100 Terminal Assembly | Analog I/O Base

GE Fanuc IC660TSA100 Analog I/O Terminal Assembly

The IC660TSA100 is a versatile analog I/O terminal assembly featuring 4 analog inputs and 2 analog outputs with dual power supply options. 

Core Features

• I/O Configuration: 4 analog inputs + 2 analog outputs
• Power Options: Dual voltage - 115V AC or 24-48V DC
• Industrial Design: Field-ready construction for harsh environments
• Port Labeling: Clear front-facing labels for easy identification
• Connection Type: Screw terminal connections for secure wiring
• Status Indicators: "I/O Enabled" and "Unit OK" LEDs
• Terminal Layout: Logical grouping of inputs, outputs, and power

Technical Specifications

• Model Number: IC660TSA100
• Manufacturer: GE Fanuc (Emerson Automation)
• Electrical Voltage: 98-132V AC nominal or 24-48V DC
• Measurement Accuracy: ±0.2% full scale at 25°C
• Signal Range Support: 5 voltage/current options available
• Isolation Rating: 1500V block-to-block isolation
• Heat Dissipation: 6W maximum typical operation
• Power Consumption: 3-6W depending on configuration
• Resolution: 12-bit for both inputs and outputs

Mechanical Specifications

• Dimensions: 224.4 × 33.4 × 39.1 mm (8.83 × 1.31 × 1.54 in)
• Product Weight: 4 lbs (1.8 kg)
• Mounting Options: Panel, wall, or DIN rail mounting
• DIN Rail Type: Standard 35 mm DIN rail (EN 60715)
• Clearance Requirement: 2" minimum clearance for cooling
• Housing Material: UL94V-0 rated thermoplastic
• Terminal Type: Removable screw terminal blocks
• Wire Size: Accepts 18-14 AWG (0.75-2.5 mm²) wire

Signal Range Compatibility

• Voltage Ranges:
  • 0-5V DC
  • 0-10V DC
  • -10 to +10V DC
  • -5 to +5V DC
  • 1-5V DC
• Current Range:
  • 4-20mA with 250Ω input impedance
• Input Impedance: > 1 MΩ for voltage inputs
• Output Drive: Up to 20mA current source capability
• Common Mode Rejection: > 120 dB at 50/60 Hz
• Update Rate: Configurable 10-100 ms scan times

Environmental Ratings

• Operating Temperature: 0-60°C (32-140°F)
• Storage Temperature: -40°C to 85°C (-40°F to 185°F)
• Vibration Resistance: 5-10Hz @ 0.2" displacement
• Shock Resistance: 15G for 11 ms duration
• Environmental Use: Indoor use only - not waterproof
• Relative Humidity: 5% to 95% non-condensing
• Cooling Requirement: Requires 2" clearance for natural convection
• Pollution Degree: Degree 2 per IEC 61131-2

System Components

• Terminal Assembly: IC660TSA100 (this unit)
• Analog I/O Block: IC660BBA100 complete assembly
• Electronics Assembly: IC660EBA100 electronic components
• Communication System: GENIUS I/O network compatible
• Controller Integration: GE Series 90-30/90-70 PLC systems
• Configuration Tools: GE Fanuc configuration software required

Installation Notes

• Safety First: Power down system before wiring connections
• Grounding Requirements: Use proper grounding (12 AWG minimum)
• Air Circulation: Maintain adequate air circulation around unit
• Indicator Verification: Check "I/O Enabled" and "Unit OK" LEDs after installation
• EMI Protection: Avoid installation near RF interference sources
• Wire Routing: Separate analog signals from power wiring
• Terminal Torque: 0.5-0.6 Nm (4.4-5.3 lb-in) recommended
• Labeling: Label all wires for future maintenance reference

Industrial Applications

• Process Monitoring: Temperature, pressure, flow, level monitoring
• Machine Control: Small machine automation and control systems
• Environmental Sensing: Humidity, pH, conductivity measurement
• Test Equipment: Test bench instrumentation and measurement
• PLC Expansion: Expansion of PLC analog I/O capabilities
• Energy Management: Power monitoring and consumption tracking
• Quality Control: Production quality monitoring and control

Electrical Protection

• Overvoltage Protection: Withstands up to 50V continuous on inputs
• Short Circuit Protection: Current limiting on output circuits
• Reverse Polarity Protection: Protected against incorrect connections
• ESD Protection: ±8 kV contact discharge capability
• Isolation: 1500V between analog circuits and power supply
• Safety Certifications: UL 508, CSA 22.2 No. 142, CE marked

Package & Shipping

• Package Contents: IC660TSA100 terminal assembly with hardware
• Mounting Hardware: DIN rail clips and mounting screws included
• Documentation: Installation guide and wiring diagrams
• Shipping: Available via FedEx, UPS, DHL with tracking
• Lead Time: Typically ships within 3-7 business days
• Technical Support: Available for installation questions
• Warranty: Standard manufacturer warranty applies

Frequently Asked Questions

• What power supplies are compatible? 115V AC (98-132V) or 24-48V DC.
• Can inputs and outputs use different signal types? Yes, each channel is independently configurable.
• Is this a complete analog module? No, this is the terminal base only; requires electronics assembly.

For analog system integration and technical support for the IC660TSA100 terminal assembly, contact our engineering team.

Contact Information:
Email: sales@nex-auto.com
Phone/WhatsApp: +86 153 9242 9628

Partner: AutoNex Controls Limited

© 2025 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/