Meggitt Vibro-Meter 204-900-000-011-A1-B21-C1-H10-I0

Meggitt Vibro-Meter Standard Proximity Measurement System

The Meggitt Vibro-Meter 204-900-000-011 delivers high-precision proximity measurement for industrial machinery protection. This complete system features an integrated IQS900 signal conditioner and provides reliable performance in standard industrial environments with flexible output options.

Key Features and Benefits

• The 204-900-000-011 system offers high 8 mV/µm sensitivity for precise vibration measurement.
• It features a 2 mm measurement range optimized for critical machinery protection applications.
• Integrated IQS900 signal conditioner provides both current and voltage output signals.
• The system includes a 10-meter cable length for flexible installation in various industrial setups.
• Lightweight design with total weight of 0.22 kg for easy handling and installation.
• Short-circuit and overvoltage protection guarantee long-term system reliability.

Detailed Technical Specifications

• Brand: Meggitt (Vibro-Meter)
• Product Type: Proximity Measuring System
• Model Number: 204-900-000-011-A1-B21-C1-H10-I0
• Environment Rating: Standard Industrial
• Sensitivity: 8 mV/µm high-precision measurement
• Measurement Range: 2 mm standard range
• Total System Length: 10 meters extended cable
• System Weight: 0.22 kg lightweight design
• Signal Conditioner: IQS900 with dual output capability
• Current Output: -15.5 to -20.5 mA (2-wire transmission)
• Voltage Output: -1.6 to -17.6 V (3-wire transmission)
• Power Supply: -18 to -30 VDC operation
• Operating Temperature: -40°C to +85°C wide range

Electrical Output Specifications

• Current output signal ranges from -15.5 mA to -20.5 mA
• Voltage output signal ranges from -1.6 V to -17.6 V
• Output impedance exceeds 60 kΩ for current output configuration
• Low output impedance below 100 Ω at DC for voltage output
• Short-circuit protection handles up to 35 mA maximum current
• Overvoltage protection typically functions at -33 VDC
• Raw output provides -0.8 V to -8.8 V range for direct measurement

Physical Characteristics

• Total system weight: 0.22 kg for easy handling and installation
• IQS900 signal conditioner weight: approximately 200 g (0.44 lb)
• Compact and lightweight design simplifies installation process
• Reduced weight minimizes stress on mounting points and structures
• Lightweight construction allows for flexible positioning in tight spaces

Installation and Mounting

• System ships without DIN-rail adaptor for direct panel mounting
• Uses two M4 screws for secure direct mounting to surfaces
• Screw-terminal connectors accept 0.2 to 1.5 mm² wire sizes
• Recommended tightening torque of 0.2 to 0.25 N•m for connections
• Self-locking coaxial connectors ensure reliable sensor connections
• IP20 protection rating suitable for indoor control panel installation

Power Requirements

• Operates on -18 to -30 VDC power supply for current output
• Requires -19 to -30 VDC for voltage output configuration
• Maximum current consumption of 25 mA at nominal 24 VDC
• Compatible with VM600Mk2/VM600 and VibroSmart monitoring systems
• Works with GSI127 galvanic separation units for enhanced safety

Packaging and Shipping

• Complete Meggitt 204-900-000-011 proximity measurement system
• IQS900 signal conditioner unit with all necessary connectors
• Lightweight packaging optimized for cost-effective shipping
• Secure packaging for worldwide shipping via FedEx, UPS, and DHL
• Total shipment weight includes protective packaging materials

Frequently Asked Questions (FAQ)

• What is the total system weight? The complete system weighs only 0.22 kg.
• What output options are available? Both 2-wire current and 3-wire voltage outputs.
• What is the system sensitivity? Provides high 8 mV/µm sensitivity for precise measurements.
• How long is the cable? This system features a 10-meter integrated cable.
• What power supply is needed? Requires -18 to -30 VDC power supply.