1m Cable Bently Nevada 31000-28-10-00-020-03-02 Housing

Bently Nevada 31000-28-10-00-020-03-02 | Short Probe Housing with Fittings Kit

Manufacturer: Bently Nevada | Part Number: 31000-28-10-00-020-03-02 | Type: 31000 Proximity Probe Housing with 3300 XL Probe | Made in: U.S.A.

Model Number Breakdown

• 31000: Proximity Probe Housing series
• 28: 3300 XL 8mm probe with multiple approvals
• 10: Probe cable length = 1.0 meter (3.3 feet)
• 00: No standoff adapter
• 020: Probe penetration = 2.0 inches (51 mm)
• 03: Fittings kit included
• 02: Mounting thread = 3/4-14 NPT

Fittings Included (Option 03)

• Two plugs for unused ports
• One 3/4-14 NPT fitting
• One 3/4-14 to 1/2-14 NPT stainless steel reducer
• Cable seal grip with grommets for three cable sizes:
  • 1/8 to 3/16 inches
  • 1/4 to 5/16 inches
  • 5/16 to 3/8 inches

Short Penetration Design

• 2.0 inch reach: Ultra-short penetration for thin casings
• Application: Thin machine walls, tight spaces, shallow mounting bosses
• Wall thickness capacity: Suitable for casings up to approximately 0.9 inches (23 mm)
• No standoff: Direct mount configuration minimizes overall length
• Fittings included: Ready for conduit and cable installation

Key Specifications

• Probe Penetration: 2.0 inches (51 mm)
• Mounting Thread: 3/4-14 NPT
• Probe Cable Length: 1.0 meter (3.3 feet)
• Probe Type: 3300 XL 8mm with multiple approvals (CSA/ATEX/IECEx)
• Standoff: None - direct mount
• Temperature Rating: -51°C to +105°C (-60°F to +221°F)
• Weight: 1.2 kg (2.6 lb)
• Recommended Torque: 29.4 N·m (260 in·lb) for retaining nut

Typical Applications for 2 Inch Penetration

• Thin wall pumps: Light industrial machinery
• Compressors: Shallow mounting ports
• Gear drives: Limited internal clearance
• Test fixtures: Temporary probe mounting
• Tight installations: Where longer housings cannot fit

Protection Ratings

• Type 4X: CSA certified for watertight and corrosion resistance
• IP66: Verified by SC115582-1(e)106 - dust tight and powerful water jets
• Electrostatic Dissipation: CENELEC EN50014 rated for hazardous areas

Included Probe Details

• Probe Model: 3300 XL 8mm with multiple approvals
• Probe Cable Length: 1.0 meter (3.3 feet)
• Probe Approvals: Multiple (CSA/ATEX/IECEx)
• Probe Type: Eddy current proximity probe
• Pre-installed: Probe fitted in housing at factory

Materials

• Housing: Glass-reinforced PPS thermoplastic with conductive fibers
• Sleeve & Retaining Chain: AISI 304 stainless steel
• Outer Sleeve & Exterior Screws: AISI 303 stainless steel
• O-Ring: Neoprene for environmental sealing
• Probe Seal: Viton O-ring internal to probe case
• Reducer & Fittings: Stainless steel

Mechanical Strength

• Load Capacity: Supports 912 N (205 lb) at 38mm from unsupported end
• Impact Resistance (BASEEFA): Two separate 4 Joule impacts at -39°C and +115°C
• Impact Resistance (CSA): 7 Joule (5.2 ft·lb) at ambient room temperature

Pressure Seal Note

• Housing seals against hose-directed water per NEMA 4X and IP66
• Not designed to resist internal or external pressure
• Probe uses Viton O-ring internal seal
• Sleeve to housing uses Neoprene O-ring
• Probes not pressure tested prior to shipment
• Contact custom design department for pressure seal testing

Installation Notes

• Requires 3/4-14 NPT mounting port
• 2.0 inch penetration for thin walls (max 0.9 inches)
• Probe pre-installed - ready to mount
• Fittings included for conduit and cable entry
• Cable seal grip accommodates multiple cable sizes
• Verify wall thickness before installation

Package Contents

• 31000-28-10-00-020-03-02 housing assembly with pre-installed 3300 XL probe
• 1.0 meter probe cable attached
• Fittings kit with plugs, reducer, and cable seal grip
• Retaining chain and mounting hardware
• Neoprene O-ring installed
• Calibration certificate for probe
• Installation instructions

Shipping Information

• Weight: 1.5 kg (3.3 lb) packaged
• Packaging: Factory sealed box
• Carriers: FedEx, UPS, DHL (2-5 business days)

Frequently Asked Questions

• Q: What is the maximum wall thickness for this 2.0 inch housing?
  A: With 2.0 inch penetration, maximum wall thickness is approximately 0.9 inches (23 mm). Calculation: 2.0in minus 0.5in minimum thread engagement minus 0.06in gap minus 0.54in safety margin. Use only on very thin casings.
• Q: What is included with the fittings option 03?
  A: Option 03 includes two plugs, one 3/4-14 NPT fitting, one 3/4-14 to 1/2-14 NPT stainless steel reducer, and a cable seal grip with three interchangeable grommets for cable sizes from 1/8 inch to 3/8 inch.
• Q: Is the probe already installed in this housing?
  A: Yes. Option 28 means the 3300 XL 8mm probe is included and factory installed. The probe has multiple approvals (CSA/ATEX/IECEx) for hazardous locations.
• Q: What is the probe cable length?
  A: The probe has a 1.0 meter (3.3 feet) cable. This provides flexibility for proximitor mounting. Extension cables can be added to reach 5m or 9m total system length.
• Q: Can this housing withstand internal pressure?
  A: No. The plastic housing is certified for NEMA 4X and IP66 (external water protection) but is not designed to resist internal or external pressure. For pressurized applications, contact Bently Nevada about custom designs.