2090-CSWM1DE-14AA31 Allen-Bradley Kinetix Cable

Single DSL Servo Cable with Connector Kit & SpeedTec DIN

LOADING & INSTALLATION SPECS

Maximum Pull Force: 150N (34 lbf) during installation

Bend Radius During Installation: Minimum 10× cable diameter

Termination Torque: 0.6±0.1 Nm for connector screws

Cable Clamping Force: 50-70N recommended

Storage Temperature: -40°C to +70°C (prior to installation)

CONNECTION DETAILS

Drive-End: Complete Field-Installable Connector Kit

Motor-End: Factory-Premiered SpeedTec DIN Connector

Contact Resistance: <10mΩ per contact

Insertion Force: 40N maximum

Extraction Force: 15N minimum

CABLE CONSTRUCTION

Conductor: 14 AWG (2.08mm²) stranded copper

Insulation: Dual-layer XLPE (0.5mm+0.3mm)

Shielding: 90% coverage spiral copper + aluminum foil

Jacket: 1.2mm thick abrasion-resistant PUR

Cable Stiffness: 350N/mm bending resistance

PERFORMANCE DATA

Voltage Rating: 800V AC/DC (IEC 60204 compliant)

Current Capacity: 25A continuous @ 50°C

Signal Integrity: <1% voltage drop at 10m length

Propagation Delay: 4.5ns/m typical

Impedance: 120Ω ±15% (1-100MHz)

MECHANICAL DURABILITY

Vibration Resistance: 10-500Hz, 15G (3 axes)

Flex Life: >2M cycles @ 8× diameter

Crush Resistance: 1000N/100mm width

Torsion Rating: ±180°/meter, 5000 cycles

ENVIRONMENTAL RATINGS

Operating Temp: -40°C to +105°C

Ingress Protection: IP68 when properly mated

Chemical Resistance: Resists oils, fuels, and coolants

Flame Rating: UL94 V-0, IEC 60332-1 compliant