2300/25_KIT-005-00 Bently Nevada Condition Kit

Bently Nevada 2300/25_KIT-005-00 | Condition Monitoring System Kit

Manufacturer: Bently Nevada | Part Number: 2300/25_KIT-005-00 | Type: 2300/25 Condition Monitoring System Kit | Made in: U.S.A.

Kit Contents

• 1 x 2300/25 Monitor with SPA Outputs
• 1 x Velomitor Sensor (330500)
• 1 x Housing Kit (105M6193-01 or -03)
• 1 x 17 ft. (5.2 m) Cable (9571)
• 1 x 6 ft. (1.8 m) Shielded Ethernet Cable
• Note: Keyphasor sensor and 24 Vdc power supply not included

Housing Kit Options

• 105M6193-01: Fiberglass housing for non-hazardous area
• 105M6193-03: Stainless steel housing for hazardous area
• Housing Dimensions: 18.03 x 15.04 x 6.3 inches

Monitor Key Specifications

• Power Input: 18 to 36 Vdc, maximum 7.5 Watts
• Operating Temperature: -30°C to +65°C (-22°F to +149°F)
• Storage Temperature: -40°C to +85°C (-40°F to +185°F)
• Humidity: Up to 95% non-condensing
• Weight: 1.03 kg (2.26 lbs)
• Dimensions: 127 x 127 x 76.2 mm (5 x 5 x 3 inches)
• Mounting: Panel mount or DIN rail (adapter included)

Input Channels

• ICP Accelerometers: 0.2 Hz to 20 kHz, 5 to 1000 mV/g, 2 to 80 g peak
• Velocity (Velomitor): 0.2 Hz to 20 kHz, 5 to 1000 mV/in/s, 0 to 50 in/s peak
• Radial Vibration: 0.2 Hz to 20 kHz, 5 to 1000 mV/mil, 0 to 160 mil peak-peak
• Thrust Channel: 5 to 1000 mV/mil scale factor range
• Process Variable Channel: Supports most units with default on temperature

Velomitor Sensor (330500)

• Velocity sensor for machine vibration monitoring
• Compatible with 2300/25 monitor inputs
• Includes 17 ft. (5.2 m) cable (9571)

Speed/Keyphasor Input

• Keyphasor transducers: Support multiple events per revolution
• Speed input: Up to 20 kHz
• Threshold voltage resolution: 0.1 Vdc
• RPM range: 1 to 120,000 (proximity), 1 to 60,000 (proximity switch), 200 to 120,000 (magnetic pickup)

Proximity Transducer Interface

• Supply Voltage: -22.8 to -25.2 Vdc
• Maximum Rated Current: 15 mA
• Accuracy: ±1% of full scale range
• Input Impedance: 10 kΩ (3-wire Voltage Mode)

Measurement Accuracy

• Temperature Channel: ±1% of full scale range
• Proximity Transducer: ±1% of full scale range
• Independent 24-bit ADCs: On all input channels
• SPA Output Accuracy: High/Low AC ±1% at 100 Hz, DC GAP ±0.5V

Outputs

• Buffered Outputs (BNC): 2 vibration outputs, 1 speed output
• Relays: Two dry-contact outputs, epoxy sealed, single pole double throw
• Relay Contact Life: 100,000 cycles at 5A, 250 Vac; 200,000 at 1A, 24 Vdc
• SPA Output: High AC 8 Vpp, Low AC 1.6 Vpp, DC GAP 0 to -20 Vdc
• SPA Frequency Response: 10 Hz to 3000 Hz ±5%

Communications

• Ethernet: 10Base-T and 100Base-TX, conforms to IEEE802.3
• Connector: RJ-45 with 6 ft. (1.8 m) shielded Ethernet cable included
• Maximum Cable Length: 100 meters (328 feet)

Data Storage

• Network disruption: Stores up to 5 alarm data captures
• Requires: System 1 Evolution 21.1 or newer, Firmware 3.2 or newer
• Trend Intervals: Pre-event 10 minutes at 1 second, 20 seconds at 100 milliseconds
• Spectrum/Waveform: Pre-event 2.5 minutes at 10 seconds

Battery Life (Real Time Clock)

• Powered: 38 years at 50°C (122°F)
• Un-powered: 12 years at 50°C (122°F)

Front Panel LEDs

• OK: Monitor operating properly
• Protection Fault: Hardware fault impacting alarm determination
• User Inhibit: Alarms/relays intentionally inhibited
• Bypass: User initiated bypass action
• Relay Status: Relays activated
• TX/RX: Ethernet status and remote communication
• Alert LED: Any channel in alert state
• Danger LED: Any channel in danger state

LCD Display

• View machine speed readings
• View vibration measurement values
• View setpoints and configuration information

Package Contents

• 2300/25 monitor with SPA outputs
• 330500 Velomitor sensor
• Housing kit (105M6193-01 or -03)
• 9571 cable (17 ft. / 5.2 m)
• 6 ft. (1.8 m) shielded Ethernet cable
• DIN rail mount adapter
• Monitor configuration software
• Installation manual

Items Not Included

• Keyphasor sensor
• 24 Vdc power supply

Shipping Information

• Weight: Approximately 3.5 kg (7.7 lb) packaged
• Packaging: Factory sealed box
• Carriers: FedEx, UPS, DHL (2-5 business days)

Frequently Asked Questions

• Q: What is included in the 2300/25_KIT-005-00?
  A: The kit includes a 2300/25 monitor, Velomitor sensor (330500), housing kit, 17 ft. cable (9571), and 6 ft. shielded Ethernet cable. Keyphasor sensor and 24 Vdc power supply are not included.
• Q: What are the housing kit options?
  A: Two housing options are available: 105M6193-01 (fiberglass for non-hazardous area) and 105M6193-03 (stainless steel for hazardous area). Both measure 18.03 x 15.04 x 6.3 inches.
• Q: What is the Velomitor sensor model?
  A: The kit includes the 330500 Velomitor sensor with a 17 ft. (5.2 m) 9571 cable for velocity measurement.
• Q: What approvals does this kit have?
  A: Approval options depend on the housing kit selected. Fiberglass housing (105M6193-01) is for non-hazardous areas. Stainless steel housing (105M6193-03) is for hazardous areas.
• Q: Do I need additional components for complete operation?
  A: Yes. You need a Keyphasor sensor for speed measurement and a 24 Vdc power supply to power the monitor. These are not included in the kit.