330102-00-10-10-01-05 3300 XL 8mm Armored Probe Bently Nevada

Flush Mount Armored 8mm Probe with Full Hazardous Approvals

The Bently Nevada 330102-00-10-10-01-05 belongs to the trusted 3300 XL series. We design this compact armored 8mm probe for accurate displacement and vibration measurements in hazardous areas where flush mounting is required. The zero unthreaded tip (0 inch) allows threads to start immediately at the probe face. 

Key Technical Specifications

• Manufacturer: Bently Nevada. Model: 330102-00-10-10-01-05.
• Product Type: 3300 XL 8 mm Proximity Probe with 3/8-24 UNF thread, with armor.
• Dimensions: Zero unthreaded tip (flush mount), 1.0 inch (25.4mm) overall case length, and 1.0 meter (3.3 feet) total length.
• Connector: Miniature coaxial ClickLoc connector with connector protector and standard cable.
• Material: Probe tip uses Polyphenylene sulfide (PPS). Probe case uses AISI 303 or 304 stainless steel.
• DC Resistance: Nominal probe resistance measures 7.59 ± 0.50 Ω for 1.0m length.
• Weight: Probe weighs 323 g/m (11.4 oz/ft).
• Approvals: CSA, ATEX, IECEx for hazardous area installation.

Environmental and Operating Ranges

• Temperature (Standard): Operates and stores from -52°C to +177°C (-62°F to +350°F).
• Temperature (Extended): Probe tip reaches -52°C to +218°C (-62°F to +425°F). Cable and connector handle up to +260°C.
• Humidity: Average Scale Factor changes less than 3% after 56 days in 93% humidity.
• Pressure Seal: Uses Viton® O-ring to seal differential pressure between tip and case.
• Armor Protection: Cable armor resists mechanical damage in high-wear installations.
• Connector Protector: Added protection keeps ClickLoc connection secure in harsh conditions.
• Hazardous Locations: Certified for Class I, Zone 0 and Zone 2 environments with appropriate barriers.

Installation and Mounting Guide

• Thread Engagement: Maximum thread engagement length is 0.563 inch (14.3 mm) for 3/8-24 UNF case thread.
• Torque (Forward Mount): Recommended torque is 11.2 N•m (100 in•lbf). Maximum rated torque is 33.9 N•m.
• Torque (First Three Threads): Use recommended torque of 7.5 N•m (66 in•lbf). Do not exceed 22.6 N•m.
• Field Wiring: Use 16-24 AWG wire. Maximum extension cable length is 305 meters (1,000 feet).
• Temperature Note: Avoid exposing probe below -34°C (-30°F) to protect pressure seal.
• Safety Barrier Required: Install with intrinsic safety barriers per drawing 141092 for Zone 0 applications.
• Flush Mount Design: Zero tip length allows probe face to sit at or near mounting surface.

Package Includes

• One Bently Nevada 330102-00-10-10-01-05 3300 XL 8 mm Probe with armor.
• Factory-attached ClickLoc connector with protector and 1.0m standard cable.
• Mounting instructions and product documentation.
• Shipping: We ship via FedEx, UPS, or DHL for fast global delivery.

Frequently Asked Questions

What does zero unthreaded tip mean?

Threads start immediately at probe face. Ideal for flush mounting where tip cannot extend beyond mounting surface.

What approvals does this probe have?

This model carries CSA, ATEX, and IECEx certifications. Suitable for hazardous areas worldwide.

What is the connector protector?

It shields the ClickLoc connection from debris and accidental impact. Adds durability in harsh environments.

Compatible with 3300 XL systems?

Yes. This 330102-00-10-10-01-05 works with all Bently Nevada 3300 XL proximitors and monitors.

What gap setting for vibration?

Set initial gap to -9 Vdc (approximately 1.27mm or 50 mils). This centers probe within linear range.