330104-00-04-50-11-00 Bently Nevada 3300 XL 8mm Probe

Bently Nevada 3300 XL 8 mm Proximity Probe – Model 330104-00-04-50-11-00

• Brand & Model: Bently Nevada · 330104-00-04-50-11-00 · 3300 XL 8 mm Probe with M10 x 1 thread.
• Unthreaded length: 00 mm · Overall case length: 40 mm · Total length: 5.0 meters (16.4 feet).
• Connector: Miniature coaxial ClickLoc with connector protector and FluidLoc cable.
• Agency approval: Not required (option 00).
• Probe tip material: Polyphenylene sulfide (PPS). Case material: AISI 303 or 304 stainless steel (SST).

Technical Specifications – Measurement & Performance

• Linear range: 2 mm (80 mils). It starts at ~0.25 mm (10 mils) from target and spans 0.25 to 2.3 mm (10 to 90 mils).
• Output voltage range: Approximately –1 to –17 Vdc across the linear zone.
• Recommended gap for radial vibration: -9 Vdc [~1.27 mm (50 mils)].
• Nominal probe DC resistance: 8.73 ± 0.50 Ω for the 5.0m length.
• Frequency response: Use field wiring up to 305 meters (1,000 feet) with the 3300 XL Proximitor Sensor. See signal rolloff graphs for high frequencies.

Environmental Tolerance & Temperature Ratings

• Standard probe operating range: -52°C to +177°C (-62°F to +350°F).
• Extended temperature probe tip: -52°C to +218°C (-62°F to +425°F). Cable & connector: -51°C to +260°C (-60°F to +500°F).
• Warning: Temperatures below –34°C (–30°F) may cause premature pressure seal failure.
• Relative humidity: Less than 3% change in Average Scale Factor (ASF) after 56 days at 93% humidity (IEC 68-2-3).
• Probe pressure sealing: Uses a Viton® O-ring. It seals differential pressure between tip and case.

Frequently Asked Questions (FAQ)

• Q: Is the 330104-00-04-50-11-00 a genuine Bently Nevada probe?
  A: Yes – we supply 100% genuine, new original Bently Nevada 3300 XL series probes.
• Q: What is the exact linear measurement range?
  A: 2 mm (80 mils) from ~0.25 mm to 2.3 mm gap, corresponding to –1 to –17 Vdc output.
• Q: Can I use this 5‑meter probe with a 9‑meter Proximitor?
  A: No – the manufacturer specifies 5‑meter probes for the 5‑meter Proximitor sensor only.
• Q: What is the maximum operating temperature for the probe tip?
  A: Standard version works up to +177°C. Extended temperature tip handles up to +218°C.
• Q: How long does delivery take?
  A: We ship within 5 days after order. Express delivery via FedEx/UPS/DHL takes 2–5 business days.
• Q: Do you support returns?
  A: Yes – we accept returns within 30 days from delivery, provided the item is unused and in original packaging.
• Q: Is the probe pressure tested before shipment?
  A: Standard probes are not pressure tested. Contact Bently Nevada custom design if you need a pressure seal test.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | Phone: +86 153 9242 9628