330163-01-40-40-40-05-05-05-79-00-00 HP Feedthrough Bently Nevada

330163-01-40-40-40-05-05-05-79-00-00 Triple Triaxial HP Feedthrough for 3300 System

• Armor Option (AA): 01 – Without armor.
• Dimension 1 Length (BB): 40 – 4.0 metres.
• Dimension 2 Length (CC): 40 – 4.0 metres.
• Dimension 3 Length (DD): 40 – 4.0 metres.
• Dimension 4 Length (EE): 05 – 0.5 metre (order in 0.1 m increments, min 0.5 m).
• Dimension 5 Length (FF): 05 – 0.5 metre (order in 0.1 m increments, min 0.5 m).
• Dimension 6 Length (GG): 05 – 0.5 metre (order in 0.1 m increments, min 0.5 m).
• O-Ring Material (HH): 79 – Ethylene propylene (EPR), compatible with ammonium hydroxide, carbon dioxide, chlorine, nitrogen, gaseous oxygen, and steam.
• High Pressure End Connector (II): 00 – Without connector.
• Low Pressure End Connector (JJ): 00 – Without connector.

Technical Specifications

• Measurement Range: Works with 5 mm, 8 mm, and 11 mm proximity probes.
• Frequency Response: Supports standard proximity probe frequencies.
• Sensitivity: Maintains system sensitivity via proper length selection.
• Linearity: Preserves linearity of the 3300 XL probe system.
• Resolution: High resolution due to gold-plated ClickLoc connectors (if used).
• Temperature Range: Operates in machine environments up to 400 psi.
• Environmental Tolerance: Withstands exposure to gases and fluids like chlorine and steam.
• Immunity: Corrosion-resistant connectors ensure reliable signal transmission.

Installation Guide

• Select the correct O-ring material based on machine gas or fluid exposure.
• Mount the feedthrough at the machine case penetration point.
• Connect the high pressure end (if connector present) to the probes inside.
• Connect the low pressure end (if connector present) to the Proximitor Sensors outside.
• If using ClickLoc connectors, tighten with finger-tight torque only – no tools needed.
• Ensure total cable length matches the Proximitor sensor requirements.

Package Contents

• 1 x Bently Nevada 330163-01-40-40-40-05-05-05-79-00-00 HP Feedthrough
• Pre-installed O-ring (Ethylene propylene, 79)
• No connectors included (high and low pressure ends are without connector)
• No armor included

Shipping & Returns

• Shipping: We ship via FedEx, UPS, or DHL.
• Dispatch: We ship within 5 business days after order confirmation.
• Returns: We accept returns within 30 days of delivery.
• Stock: We keep this model in stock for quick shipment.

Frequently Asked Questions (FAQ)

• Q: Is this feedthrough new and original?
  A: Yes, this is a brand new, genuine Bently Nevada 330163-01-40-40-40-05-05-05-79-00-00.
• Q: How many cables can it route?
  A: This triple triaxial model routes three separate probe cables through the machine case.
• Q: What probes work with this feedthrough?
  A: It works with 3300 XL 8 mm, 3300 XL 11 mm, and 3300 5 mm proximity probes.
• Q: What is the maximum pressure it can seal?
  A: It seals up to 2.76 MPa (400 psi) inside the machine case.
• Q: Which O-ring material does this model use?
  A: This model uses an Ethylene propylene (EPR) O-ring (option 79) for chlorine, steam, and other gases.
• Q: Why does this model have no connectors?
  A: The ordering code specifies 00 for both ends, meaning it comes without connectors – you can add your own.
• Q: What are the cable lengths?
  A: Dimensions 1, 2, and 3 are each 4.0 metres; Dimensions 4, 5, and 6 are each 0.5 metre.
• Q: Do I need special tools for installation?
  A: No, if using ClickLoc connectors, finger-tight torque is sufficient.

Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | +86 153 9242 9628

© 2026 NexAuto Technology Limited. All rights reserved.