330703-000-040-10-12-00 Bently Nevada Metric Probe

Bently Nevada 330703-000-040-10-12-00 | 11mm Metric Proximity Probe with FluidLoc Cable

Manufacturer: Bently Nevada | Part Number: 330703-000-040-10-12-00 | Type: 3300 XL 11mm Proximity Probe | Thread: M14 x 1.5 Metric | Made in: U.S.A.

Model Number Breakdown

• 330703: 3300 XL 11mm Probe, M14 x 1.5 thread, without armor
• 000: Unthreaded length = 0 mm
• 040: Overall case length = 40.0 mm
• 10: Total cable length = 1.0 meter (3.3 feet)
• 12: Miniature coaxial ClickLoc connector, FluidLoc cable
• 00: Agency approval = Not required

Key Specifications

• Probe Diameter: 11mm tip
• Thread Size: M14 x 1.5 (metric)
• Case Length: 40.0 mm
• Unthreaded Length: 0 mm
• Cable Length: 1.0 meter (3.3 feet)
• RPROBE at 1.0m: 5.9 ± 0.5 Ohms
• Cable Type: 75 Ω triaxial, FEP insulated, FluidLoc
• Connector: Miniature coaxial ClickLoc

FluidLoc Cable Feature

• FluidLoc cable: Fluid-resistant for harsh environments
• Benefit: Withstands oils, coolants, and industrial fluids
• Note: No connector protector included (option 12 vs 11)
• Application: Wet environments, machinery with fluid exposure

Physical Specifications

• Tip Material: Polyphenylene sulfide (PPS)
• Case Material: AISI 304 stainless steel
• Maximum Thread Engagement: 21 mm
• Maximum Rated Torque: 63.3 N·m (560 in·lb)
• Recommended Torque: 21.1 N·m (187 in·lb)

Electrical Specifications

• Supply Voltage: -17.5 to -26 Vdc, nominal -24 Vdc
• Linear Range: Larger than 8mm probes (typically 3mm+ for 11mm)
• Sensitivity: Factory calibrated per 3300 XL standards
• Cable Impedance: 75 Ω triaxial construction

Magnetic Field Effects (60 Hz, up to 300 Gauss - 5m system)

• At 0.5mm gap (20 mils): 0.001 output voltage (mil pp/gauss)
• At 2.5mm gap (100 mils): 0.009 output voltage (mil pp/gauss)
• At 4.6mm gap (180 mils): 0.027 output voltage (mil pp/gauss)

Temperature Ratings

• Operating & Storage: -52°C to +177°C (-62°F to +351°F)
• Pressure seal warning: Below -34°C may cause premature seal failure
• Temperature Class T1: -55°C to +232°C (EPL Ga/Gc)
• Temperature Class T2: -55°C to +177°C
• Temperature Class T3: -55°C to +120°C
• Temperature Class T4: -55°C to +80°C
• Temperature Class T5: -55°C to +40°C

Agency Approval - None (00)

• Approval option 00: No hazardous location certifications
• Safe area use only: Not certified for explosive atmospheres
• Application: Non-hazardous industrial environments

Connector Option 11 vs 12 Comparison

• Option 11: ClickLoc connector with connector protector + FluidLoc cable
• Option 12: ClickLoc connector only + FluidLoc cable (no protector)
• Choose option 12 when: Connector protector not needed or will be installed immediately

Package Contents

• 330703-000-040-10-12-00 probe assembly with 1.0m FluidLoc cable
• ClickLoc connector
• Calibration certificate
• Installation instructions

Shipping Information

• Weight: Approximately 0.4 kg (0.88 lb)
• Packaging: Protective box
• Carriers: FedEx, UPS, DHL (2-5 business days)

Frequently Asked Questions

• Q: What is the difference between option 11 and option 12 for connector and cable?
  A: Option 11 includes a connector protector plus FluidLoc cable. Option 12 includes FluidLoc cable only (no connector protector). Choose option 12 if you have a protector already or will connect immediately.
• Q: What is FluidLoc cable and when should I use it?
  A: FluidLoc cable is fluid-resistant cable designed for applications with exposure to oils, coolants, and industrial fluids. Standard cables may degrade in these environments.
• Q: What is the recommended installation torque?
  A: Recommended torque is 21.1 N·m (187 in·lb). Maximum rated torque is 63.3 N·m (560 in·lb). Do not exceed maximum to avoid thread damage.
• Q: Is this probe approved for hazardous locations?
  A: No. Option 00 means no hazardous location certifications. Use only in safe (non-classified) areas. For hazardous locations, choose option 05 (multiple approvals).
• Q: What is the advantage of 11mm probe over 8mm?
  A: 11mm probes offer longer linear range (typically 3mm+ vs 2mm for 8mm). Better for large shaft movement, thrust position monitoring, and applications with wider gap variations.