330709-000-070-50-12-00 Bently Nevada 11mm Probe

330709-000-070-50-12-00 – 3300 XL 11 mm Proximity Probe by Bently Nevada

• Manufacturer: Bently Nevada (Made in U.S.A.)
• Product No.: 330709-000-070-50-12-00 – 3300 XL 11 mm Probe, M16 x 1.5 thread, without armor
• Unthreaded Length Option: 000 = 0 mm
• Overall Case Length Option: 070 = 70 mm
• Total Length Option: 50 = 5.0 meters (16.4 feet). Use this probe only with the five meter Proximitor Sensor.
• Connector and Cable Option: 12 = Miniature coaxial ClickLoc connector, FluidLoc cable
• Agency Approval Option: 00 = Not required

Core Technical Specifications (System +18°C to +27°C, -24 Vdc supply, 10 kΩ load, AISI 4140 steel target)

• Probe DC Resistance (5.0 m length): 7.2 ± 0.8 ohms from center conductor to outer conductor (RPROBE).
• Cross-talk Limitation - Flat Target Diameter: Recommended minimum 30.5 mm (1.2 in).
• Shaft Diameter for Cross-talk Control: Recommended minimum 152 mm (6.0 in).
• Probe Tip Material: Polyphenylene sulfide (PPS).
• Probe Case Material: AISI 304 stainless steel (SST).
• Probe Cable Specification: 75 Ω triaxial, FEP insulated. Total probe lengths available: 1, 5, or 9 meters.
• Connector-to-Connector Torque: Recommended finger tight. Maximum torque 0.565 N•m (5 in•lb).
• Minimum Bend Radius (with or without SST armor): 25.4 mm (1.0 in).
• Probe Case Thread: M16 x 1.5. Maximum length of thread engagement is 24 mm.
• Probe Temperature Range (Operating & Storage): -52°C to +177°C (-62°F to +351°F). Exposing the probe below -34°C may cause premature pressure seal failure.
• Probe Case Torque (M16x1.5 case): Recommended 21.1 N•m (187 in•lb). Maximum rated 63.3 N•m (560 in•lb).

Temperature Classification (Probe Only) for Hazardous Areas

• For EPL Ga and Gc: T1: -55°C to +232°C | T2: -55°C to +177°C | T3: -55°C to +120°C | T4: -55°C to +80°C | T5: -55°C to +40°C.
• For EPL Dc: T280°C @ Ta: -55°C to +232°C | T225°C @ Ta: -55°C to +177°C | T170°C @ Ta: -55°C to +120°C | T130°C @ Ta: -55°C to +80°C | T105°C @ Ta: -55°C to +100°C | T90°C @ Ta: -55°C to +40°C.

Installation Guidelines for the 3300 XL 11 mm Probe

• Apply the recommended probe case torque of 21.1 N·m (187 in·lb). Never exceed 63.3 N·m (560 in·lb).
• Limit thread engagement to 24 mm maximum for the M16x1.5 thread.
• Keep the cable bend radius at or above 25.4 mm (1.0 in) to avoid damage.
• Tighten the connector only to finger tight. Maximum torque for connector is 0.565 N·m (5 in·lb).
• Do not expose this probe to temperatures below -34°C. This protects the internal pressure seal.
• Use this 5-meter probe exclusively with a five meter Proximitor Sensor for accurate readings.

What's Inside the Box (Packaging List)

• One Bently Nevada 330709-000-070-50-12-00 probe (11 mm, M16x1.5 thread, without armor, 70 mm case, 5.0 m FluidLoc cable).
• Miniature coaxial ClickLoc connector (pre-installed).
• Basic probe installation instruction sheet.
• No certificate or 12-month warranty document included. The probe is a brand-new original item.

Shipping & Logistics

• We have the 330709-000-070-50-12-00 in stock right now.
• We ship within 5 business days after order confirmation.
• We use FedEx, UPS, and DHL for reliable worldwide delivery.
• Each probe receives careful packing to prevent transit damage.

Returns & Support

• We support a 30-day return policy for this product.
• The probe must remain unused and in original packaging.
• Contact us before returning to receive return authorization.

Frequently Asked Questions (FAQ)

• Q: Is the Bently Nevada 330709-000-070-50-12-00 a genuine new probe?
  A: Yes, we supply only a brand-new original unit. No used or refurbished probes.
• Q: Can I use this 5-meter probe with an 9-meter Proximitor Sensor?
  A: No. This probe works only with a five meter Proximitor Sensor. Mixing lengths causes calibration errors.
• Q: What target size does this probe need for minimum cross-talk?
  A: The recommended flat target minimum diameter is 30.5 mm (1.2 in). Shaft diameter must be at least 152 mm (6.0 in).
• Q: What is the maximum operating temperature for this probe?
  A: The probe operates from -52°C up to +177°C (-62°F to +351°F). Avoid temperatures below -34°C to protect the seal.
• Q: Do you have the 330709-000-070-50-12-00 in stock?
  A: Yes, we keep this model in stock. We ship within 5 days via FedEx, UPS, or DHL.
• Q: What torque should I apply to the probe case?
  A: Use the recommended 21.1 N·m (187 in·lb). The maximum allowed torque is 63.3 N·m (560 in·lb).
• Q: Can I return the probe if it doesn't fit my machine?
  A: You have 30 days to return the unused product in its original packaging.
• Q: What cable type does this probe use?
  A: It uses a 75 Ω triaxial FEP insulated cable with FluidLoc protection, total length 5.0 meters.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | Phone: +86 153 9242 9628 (WhatsApp)