330904-00-10-70-01-00 Bently Nevada | Proximity Probes

Bently Nevada 3300 NSv Proximity Probe: Premium Performance Sensor

Full Part Number: 330904-00-10-70-01-00

Manufacturer: Bently Nevada | Condition: New & Original | Warranty: 12 Months

Advanced Probe Configuration

The 330904 series features specialized engineering options:

Thread Type: M8X1 with protective armor
Unthreaded Length: 00 mm (code -00)
Case Length: 100 mm (code -10)
Cable Length: 7.0 meters (23.0 feet, code 70)
Connector System: Miniature coaxial ClickLoc with protector (code 01)
Certifications: No agency approvals required (code 00)

Enhanced Technical Specifications

Electrical Performance

Probe DC Resistance: 5.9Ω ±0.9Ω at 7m length
Extension Cable Resistance: Center 0.220Ω/m | Shield 0.066Ω/m
Capacitance: 69.9 pF/m typical
Frequency Response: 0-10 kHz (±3dB) with 305m wiring

Mechanical Durability

Case Material: AISI 304 Stainless Steel
Tip Material: Chemical-resistant PPS
Temperature Range: -52°C to +177°C (-62°F to +351°F)
Pressure Seal: Viton O-ring design
Bend Radius: Minimum 25.4 mm (1.0 in)

Precision Measurement Capabilities

Linear Measurement Range: 1.5 mm (60 mils)
Optimal Gap Setting: 1.0 mm (40 mils)
Scale Factor: 7.87 V/mm (200 mV/mil) ±12.5%
Deviation Tolerance: ±0.06 mm (±2.3 mils)
Target Requirements: Minimum 8.9mm diameter | Recommended 13mm

Installation & Compatibility

Torque Specifications:

Recommended: Finger tight
Maximum: 0.56 N•m (5 in•lb)
Connector Torque: 5.1 N•m recommended | 7.3 N•m maximum

Compatible with all 3300 XL NSv Proximitor Sensors and previous 3300 RAM systems. Field wiring supports up to 305 meters (1,000 feet) using 0.2-1.5mm² shielded triad cable.