A02B-0050-C540 FANUC 9-Inch Monochrome CRT Panel

A02B-0050-C540 FANUC Series 10/11/12 9-Inch Monochrome CRT Operator Panel

Technical Specifications

• Brand: FANUC
• Model: A02B-0050-C540
• Series: FANUC Series 10/11/12 CNC
• Category: CRT operator panel
• Display: 9-inch monochrome CRT
• Supply voltage: Not published by the manufacturer (early CRT unit, no spec for this order code)
• Operating temperature: 0 to 55 °C (family-level reference per B-61393E p.112, Series 0/00/0-Mate)
• Storage temperature: −20 to 60 °C (family-level reference per B-61393E p.112)
• Relative humidity: 75%RH or less, no condensation
• Weight: ~4.50 kg (supplier-reported, family-level per Series 0 CRT/MDI units)
• Dimensions: No numerical table published for this CRT panel

Communication and Design

• The panel works as a passive component and carries no built-in communication ports.
• It displays CNC data and receives signals from the Series 10/11/12 control unit.
• This simple design reduces failure points and simplifies field replacement.
• Technicians can swap the unit without configuring network or serial parameters.

Environmental and Durability Notes

• The 0 to 55 °C operating range comes from FANUC family documentation, not this exact order code.
• The −20 to 60 °C storage range follows the same family-level reference.
• Keep relative humidity at or below 75%RH and prevent condensation on the CRT face.
• Confirm these figures against official FANUC documentation before you install the panel.

Installation Guide

• Power down the FANUC Series 10/11/12 CNC and lock out the main supply first.
• Remove the old CRT panel and label each signal cable for reference.
• Mount the A02B-0050-C540 into the operator station and secure all fasteners.
• Reconnect the display cables to the CNC control unit in the original order.
• Restore power and check display output before production resumes.

Packing List

• 1 × FANUC A02B-0050-C540 9-inch monochrome CRT operator panel
• Protective foam and anti-static packaging
• Shipping carton with handling labels

Shipping

• We ship orders within 5 days after payment confirmation.
• We use FedEx, UPS, and DHL for international delivery.
• We provide tracking details once the carrier picks up the parcel.

FAQ

• Q: Is the A02B-0050-C540 brand new and original?
  A: Yes, we supply this unit as brand new original stock.
• Q: Do you have the A02B-0050-C540 in stock now?
  A: Yes, we hold this item in stock and ship within 5 days.
• Q: Which couriers do you use?
  A: We ship with common carriers such as DHL, FedEx, and UPS.
• Q: What is your return policy?
  A: We accept returns within 30 days of delivery.
• Q: Which FANUC CNC controls work with this panel?
  A: Distributor listings show Series 10/11/12 compatibility, but confirm against official FANUC documentation first.
• Q: Does the panel have communication ports?
  A: No, it works as a passive component with no built-in communication ports.
• Q: What operating temperature does this panel support?
  A: Family documentation lists 0 to 55 °C, so verify this against FANUC official specs.
• Q: Why is there no published supply voltage for this order code?
  A: Early CRT units lack a published spec for this code, so check the machine manual.

© 2026 NexAuto Technology Limited. All rights reserved. Original Source: https://www.nex-auto.com/ Contact: sales@nex-auto.com Phone: +86 153 9242 9628