A02B-0051-C012 FANUC 6M/6T CRT/MDI Panel Unit

A02B-0051-C012 FANUC CRT/MDI Operator Panel for Series 6M/6T CNC

Technical Specifications

• Brand: FANUC
• Model: A02B-0051-C012
• Series: FANUC System 6 CNC (6M/6T)
• Category: CRT/MDI operator panel unit
• Display: CRT with integrated MDI keyboard
• Communication ports: None; the unit works as a passive component
• Supply voltage: Not published by the manufacturer for this order code
• Operating temperature: 0 to 55 °C (family-level reference, not confirmed for this order code)
• Storage/transport temperature: −20 to 60 °C (family-level reference, not confirmed for this order code)
• Relative humidity: 75%RH or less, no condensation
• Dimensions (H×W×D): Not published by the manufacturer for this order code
• Weight: Not published by the manufacturer for this order code
• Lifecycle status: Legacy unit, superseded by the i-series and 30i-B generation

Installation Guide

• Confirm your control model reads 6M or 6T before you mount the panel.
• Power down the CNC and lock out the main supply before you start.
• Label each cable and connector so you can refit them in the same order.
• Remove the old CRT/MDI unit and keep the mounting hardware for reuse.
• Seat the A02B-0051-C012 panel into the same cutout and tighten the fasteners evenly.
• Reconnect the cables, restore power, and check the display and keys.
• Run a short MDI test cycle to confirm normal operation.

Environmental and Interference Notes

• Keep the ambient temperature inside the 0 to 55 °C family reference range.
• Hold relative humidity at 75%RH or below and avoid condensation on the panel.
• Store and ship the unit between −20 and 60 °C to protect the CRT assembly.
• Route signal cables away from drives and power lines to limit electrical noise.
• Ground the control cabinet properly to improve immunity to interference.

Packing List

• 1 × FANUC A02B-0051-C012 CRT/MDI operator panel unit
• 1 × Protective foam and antistatic bag
• 1 × Outer shipping carton

Shipping

• We ship worldwide by FedEx, UPS, and DHL.
• We dispatch in-stock items within 5 days after we confirm your order.
• We pack every unit with antistatic and shock-absorbing material.

FAQ

• Q: Does this panel fit both 6M and 6T controls?
  A: Distributors list it for both models, but you should verify fitment against official FANUC documentation.
• Q: What supply voltage does the unit need?
  A: FANUC does not publish a voltage spec for this order code, so check your machine's manual.
• Q: What is the operating temperature range?
  A: The family reference is 0 to 55 °C, and we have not confirmed it for this specific order code.
• Q: Does the unit include communication ports?
  A: No, it works as a passive component and has no built-in communication ports.
• Q: Is the item in stock and how fast do you ship?
  A: Yes, we keep fresh original stock and ship within 5 days by DHL, FedEx, or UPS.
• Q: Can I return the unit?
  A: Yes, we accept returns within 30 days.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628