A02B-0051-C542 FANUC Machine Control Panel

A02B-0051-C542 FANUC Machine Control Panel with Keys for System 6 CNC

Technical Specifications

• Brand: FANUC
• Model: A02B-0051-C542
• Series: FANUC System 6 CNC
• Category: Machine control panel
• Function: Machine control panel with operator keys
• Communication ports: None; the unit works as a passive component
• Supply voltage: Not published by the manufacturer for this order code
• Operating temperature: 0 to 55 °C (family-level reference, not confirmed for this order code)
• Storage/transport temperature: −20 to 60 °C (family-level reference, not confirmed for this order code)
• Relative humidity: 75%RH or less, no condensation
• Dimensions (H×W×D): Not published by the manufacturer for this order code
• Weight: Not published by the manufacturer for this order code
• Lifecycle status: Legacy unit, superseded by the i-series and 30i-B generation

Installation Guide

• Check that your machine uses a FANUC System 6 control before you install the panel.
• Switch off the CNC and isolate the main power supply first.
• Label each cable and connector so you can refit them in the same order.
• Remove the old control panel and keep the mounting hardware for reuse.
• Fit the A02B-0051-C542 panel into the original cutout and tighten the fasteners evenly.
• Reconnect the cables to the CNC main unit.
• Restore power and test every operator key for correct response.

Environmental and Interference Notes

• Keep the ambient temperature within the 0 to 55 °C family reference range.
• Maintain relative humidity at 75%RH or below and prevent condensation.
• Store and transport the unit between −20 and 60 °C to protect the electronics.
• Route signal cables away from drives and power lines to limit electrical noise.
• Ground the control cabinet properly to improve immunity to interference.

Packing List

• 1 × FANUC A02B-0051-C542 machine control panel with keys
• 1 × Antistatic bag and protective foam
• 1 × Outer shipping carton

Shipping

• We ship worldwide by FedEx, UPS, and DHL.
• We dispatch in-stock items within 5 days after order confirmation.
• We protect every panel with antistatic and shock-absorbing packing.

FAQ

• Q: Does this panel suit all FANUC System 6 machines?
  A: Suppliers list it for the System 6 family, but you should verify fitment against official FANUC documentation.
• Q: What supply voltage does the panel need?
  A: FANUC does not publish a voltage spec for this order code, so check your machine manual.
• Q: What is the operating temperature range?
  A: The family reference is 0 to 55 °C, and we have not confirmed it for this specific order code.
• Q: Does the panel include communication ports?
  A: No, it works as a passive component and has no built-in communication ports.
• Q: Is the item in stock and how fast do you ship?
  A: Yes, we keep fresh original stock and ship within 5 days by DHL, FedEx, or UPS.
• Q: Can I return the unit?
  A: Yes, we accept returns within 30 days.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628