ABB NTCL01 INFI-Net Communication Link TU

ABB NTCL01 INFI-Net Communication Link Termination Unit

The ABB NTCL01 INFI-Net Communication Link Termination Unit provides reliable network termination for INFI 90 control systems. This module terminates the INFI-Net communication link. We design the NTCL01 for use with the INNIS01 interface. It ensures stable data transmission across the INFI 90 network.

Key technical specifications

• Product number: NTCL01.
• Product type: INFI-Net Communication Link Termination Unit.
• System compatibility: INFI 90 distributed control system.
• Interface requirement: Use with INNIS01 communication interface.
• Network type: INFI-Net communication bus.
• Termination function: Provides proper network line termination.
• Signal integrity: Reduces signal reflection and noise on the bus.
• Operating voltage: 5 Vdc from the INFI 90 backplane.

Physical dimensions & weight

• Depth: 9.65 cm (3.80 inches).
• Width: 22.10 cm (8.70 inches).
• Height: 23.62 cm (9.30 inches).
• Gross weight: 0.476 kg (1.05 lbs).
• Form factor: Standard INFI 90 module size.
• Mounting: Plugs into INFI 90 I/O cabinet backplane.

Installation & setup guidelines

• Install the ABB NTCL01 into a dedicated INFI 90 module slot.
• Connect the INNIS01 communication interface to the module.
• Verify the termination switch is in the correct position.
• Use the module at the end of the INFI-Net cable segment only.
• Check LED indicators for proper network communication status.
• Ensure the backplane provides 5 Vdc power to the module.
• Test communication after installation using INFI 90 diagnostics.

Package contents

• One ABB NTCL01 INFI-Net Communication Link Termination Unit.
• Mounting clips for backplane insertion.
• Basic installation instructions.

Shipping options

• We ship via FedEx, UPS, or DHL worldwide.
• Tracking and insurance included for every order.
• Express delivery typically arrives in 2-5 business days.

Frequently asked questions

• What system does the ABB NTCL01 work with?
  The NTCL01 works with the INFI 90 distributed control system by ABB.
• Do I need the INNIS01 to use this module?
  Yes, the module requires the INNIS01 communication interface for proper operation.
• Where do I place this termination unit?
  We place it at the physical end of the INFI-Net cable segment.
• What happens without proper termination?
  Without termination, signal reflections cause data errors and communication failures.
• Is the mounting orientation important?
  The module fits only one way into the INFI 90 backplane slot.
• How do I verify the module works?
  Check the status LEDs and run INFI 90 diagnostics after installation.