Bently Nevada 31000-28-10-00-026-00-02 Thin Wall Housing

Bently Nevada 31000-28-10-00-026-00-02 | Short Penetration Probe Housing

Manufacturer: Bently Nevada | Part Number: 31000-28-10-00-026-00-02 | Type: 31000 Proximity Probe Housing with 3300 XL Probe | Made in: U.S.A.

Model Number Breakdown

• 31000: Proximity Probe Housing series
• 28: 3300 XL 8mm probe with multiple approvals
• 10: Probe cable length = 1.0 meter (3.3 feet)
• 00: No standoff adapter
• 026: Probe penetration = 2.6 inches (66 mm)
• 00: Without fittings
• 02: Mounting thread = 3/4-14 NPT

Short Penetration Design

• 2.6 inch reach: Shortest standard probe penetration available
• Application: Thin machine casings, tight spaces, limited clearance areas
• Wall thickness capacity: Suitable for casings up to approximately 1.5 inches thick
• No standoff: Direct mount configuration minimizes overall length
• Fittings: None included (option 00) - order separately

Key Specifications

• Probe Penetration: 2.6 inches (66 mm)
• Mounting Thread: 3/4-14 NPT
• Probe Cable Length: 1.0 meter (3.3 feet)
• Probe Type: 3300 XL 8mm with multiple approvals (CSA/ATEX/IECEx)
• Standoff: None - direct mount
• Temperature Rating: -51°C to +105°C (-60°F to +221°F)
• Weight: 1.2 kg (2.6 lb)
• Recommended Torque: 29.4 N·m (260 in·lb) for retaining nut

Typical Applications for 2.6 Inch Penetration

• Small pumps: Thin bearing housing walls
• Fans and blowers: Compact machinery with limited space
• Gearboxes: Shallow mounting bosses
• Test stands: Temporary installation on thin test fixtures
• Retrofit projects: Replacing probes in tight original designs

Protection Ratings

• Type 4X: CSA certified for watertight and corrosion resistance
• IP66: Verified by SC115582-1(e)106 - dust tight and powerful water jets
• Electrostatic Dissipation: CENELEC EN50014 rated for hazardous areas

Included Probe Details

• Probe Model: 3300 XL 8mm with multiple approvals
• Probe Cable Length: 1.0 meter (3.3 feet)
• Probe Approvals: Multiple (CSA/ATEX/IECEx)
• Probe Type: Eddy current proximity probe
• Pre-installed: Probe fitted in housing at factory

Materials

• Housing: Glass-reinforced PPS thermoplastic with conductive fibers
• Sleeve & Retaining Chain: AISI 304 stainless steel
• Outer Sleeve & Exterior Screws: AISI 303 stainless steel
• O-Ring: Neoprene for environmental sealing
• Probe Seal: Viton O-ring internal to probe case

Mechanical Strength

• Load Capacity: Supports 912 N (205 lb) at 38mm from unsupported end
• Impact Resistance (BASEEFA): Two separate 4 Joule impacts at -39°C and +115°C
• Impact Resistance (CSA): 7 Joule (5.2 ft·lb) at ambient room temperature

Pressure Seal Note

• Housing seals against hose-directed water per NEMA 4X and IP66
• Not designed to resist internal or external pressure
• Probe uses Viton O-ring internal seal
• Sleeve to housing uses Neoprene O-ring
• Probes not pressure tested prior to shipment
• Contact custom design department for pressure seal testing

Installation Notes

• Requires 3/4-14 NPT mounting port
• 2.6 inch penetration for thin walls (max 1.5 inches)
• Probe pre-installed - ready to mount
• No fittings included - order separately if needed
• Verify wall thickness before installation
• Ensure probe tip clears internal components

Package Contents

• 31000-28-10-00-026-00-02 housing assembly with pre-installed 3300 XL probe
• 1.0 meter probe cable attached
• Retaining chain and mounting hardware
• Neoprene O-ring installed
• Calibration certificate for probe
• Installation instructions
• Note: Fittings not included (option 00)

Shipping Information

• Weight: 1.4 kg (3.1 lb) packaged
• Packaging: Factory sealed box
• Carriers: FedEx, UPS, DHL (2-5 business days)

Frequently Asked Questions

• Q: What is the maximum wall thickness for this 2.6 inch housing?
  A: With 2.6 inch penetration, maximum wall thickness is approximately 1.5 inches (38 mm). Calculation: 2.6in minus 0.5in minimum thread engagement minus 0.06in gap minus 0.54in safety margin. This is the shortest standard penetration available.
• Q: Is the probe already installed in this housing?
  A: Yes. Option 28 means the 3300 XL 8mm probe is included and factory installed. The probe has multiple approvals (CSA/ATEX/IECEx) for hazardous locations.
• Q: What is the probe cable length?
  A: The probe has a 1.0 meter (3.3 feet) cable. This provides flexibility for proximitor mounting. Extension cables can be added to reach 5m or 9m total system length.
• Q: Why choose such a short penetration housing?
  A: Short penetration minimizes the probe's extension into the machine. This reduces risk of probe damage, improves rigidity, and fits in tight spaces where longer housings cannot be installed.
• Q: Can this housing withstand internal pressure?
  A: No. The plastic housing is certified for NEMA 4X and IP66 (external water protection) but is not designed to resist internal or external pressure. For pressurized applications, contact Bently Nevada about custom designs.