Bently Nevada Interconnect Cable CB2W100-250 250ft

Bently Nevada CB2W100-250 Interconnect Cable

The Bently Nevada CB2W100-250 Interconnect Cable provides reliable connections for your monitoring system over ultra long distances. This premium cable features MIL-C 5015 connectors with a splash-proof design and 250 foot length.

Key specifications

• Brand: Bently Nevada | Model: CB2W100-250
• Type: Interconnect Cable for sensors and accelerometers
• Length: 250 feet (76.2 meters)
• Connectors: MIL-C 5015, 2 socket, splash proof
• Cable type: 20 AWG, twisted pair, shielded
• Jacket material: Yellow Teflon®
• Included components: Locking ring, adapter seal, and O-ring
• Termination: Isolated to blunt cut
• Origin: Made in U.S.A.

Important compatibility notes

• Not for use with 200350 Accelerometer: The O-ring will not form a proper seal with that accelerometer model.
• High frequency attenuation: This cable exceeds 30 meters (100 feet) by a wide margin. Expect significant amplitude attenuation at higher frequencies when using the AM3100T2-Z2 Accelerometer.

Installation requirements

• Ensure compatible sensor before connecting this cable
• Check O-ring condition before each installation
• Tighten locking ring securely but do not over-torque
• Keep cable away from sharp edges and high heat sources
• Expect reduced high frequency response due to cable length
• Consider signal conditioning or shorter cable for critical measurements

Package includes

• One CB2W100-250 interconnect cable assembly
• Locking ring pre-installed
• Adapter seal and O-ring included
• Shipping via FedEx, UPS, or DHL

Frequently asked questions

• What sensors work with this CB2W100-250 cable?
  This cable works with most Bently Nevada sensors that accept MIL-C 5015 2-socket connectors. Do not use with the 200350 Accelerometer.
• How does this 250 foot cable affect my signal?
  For high frequency measurements with AM3100T2-Z2 Accelerometer, expect significant amplitude attenuation. Use this length only when lower frequencies are your primary concern.
• When should I choose this 250 foot cable?
  Select this length only when absolutely necessary for ultra long distance runs. For high frequency data, we recommend keeping cable length under 100 feet.
• Why is Teflon jacket important for long cables?
  Teflon provides excellent chemical resistance and durability. This protects the long cable run in harsh industrial environments.
• What does isolated to blunt cut mean?
  The sensor end has an isolated connector. The other end has a blunt cut for field termination or connection to your monitoring system.
• Can I extend this cable even further?
  Extending beyond 250 feet will further increase signal attenuation. We do not recommend longer runs for critical measurements.
• Is the O-ring replaceable?
  Yes, you can replace the O-ring if damaged. Use the correct size for proper splash proof sealing.
• How do I choose between different CB2W100 lengths?
  Use 015 (15ft) or 064 (64ft) for high frequency applications. Reserve 150 (150ft), 200 (200ft), and 250 (250ft) for low frequency measurements only.
• Does this cable work with other accelerometer models?
  Yes, the compatibility issue only applies to the 200350 Accelerometer. Other accelerometers with MIL-C 5015 2-socket connectors work properly.
• Can I use this cable for permanent installation?
  Yes, the Teflon jacket and splash-proof connectors make this suitable for permanent industrial installation.